Technician Power Plant
Resume:
CURRICULUM VITAE
GIREESH G NAIR Ph Resi :
+914***-****** THELAKKATTU
Mob : +918********* KALLARKUTTY P.O
Email : ***********@*****.***
PANAMKUTTY
IDUKKI DIST.
KERALA, INDIA
PIN: 685562
APPLICATION FOR THE POST OF : - INSTRUMENT TECHNICIAN
Objective:
Looking for a challenging and skillful position as an
Instrument & Control Technician in the field of Industrial Instrumentation
and Control where my efforts will be recognized and rewarded.
Resume Summary:
For the past 6 YEARS working with oil and
gas industry as Instrument Technician. Within this period I have a
comprehensive experience in maintenance, construction, installation, pre
commissioning, commissioning, loop checking, troubleshooting, corrective
and preventive maintenance of many electronic and electrical instruments
and controls. Automation controls and Central Control System related to gas
turbines and compressors, and PLC (ALLEN BRADLEY). Worked on YOKOGAWA DCS
(Centum CS 3000) & Centum 3000 VP, ABB 800xA, HONEYWELL (EXPERION) and ESD
System (PRO Safe RS-2.03.80). Oil and gas facilities such as gas lift
compressors and gas plant. Within this period my responsibilities includes
preventive maintenance of instruments, and, familiar in any pneumatic,
electronic and electrical instruments such as transmitters (level, flow,
temperature, pressure), control valves, relief valves, solenoid valves,
motor operated valves, controllers (level, flow, pressure, temperature),
regulators, analyzers, orifice plates, and indicating instruments from
various American and European manufacturers.
And also good experience on functional testing and
calibration of FIRE AND GAS instruments such as Flammable gas (h2,
methane detectors and toxic gas detectors(co, h2s, nh3 flame
detectors, smoke detectors, heat detectors and VESDA panels.
Gained very good knowledge and experience in all types of
transmitters, control valves, motor operated valves working under both HART
and FF (Foundation Fieldbus) communication protocol. Also better experience
in different types of ON OFF Valves such as SDV (Shut Down Valve) and BDV
(Blow Down Valve).
Experienced in Configuration, Loop Testing and Maintenance of MOV (Motor
Operated Valve) working under HART & FF protocol.
Total Experience :- 6 Years
Present status : -
Worked as an Instrument Technician From 20th August 2012 to 10th
January 2013 at Abudhabi.
Client:- ADCO (ABU DHABI COMPANY FOR ONSHORE OIL OPERATIONS)
Company:- TEKFEN INSAAT VE TESISAT AS
Main Contractor : - PETROFAC INTERNATIONAL LIMITED
Worked in Full Field Development Project (Asab CDS)
for Loop checking, Functional test, Pre-commissioning, Commissioning,
etc...
Work Experience
Client :- QATAR PETROLIUM -SFG (Mar-2011 TO Dec-2011)
Company :- BLACKCAT ENG & CONSTRUCTION COMPANY WLL
Worked in SFG (Sweet Fuel Gas) Project for Calibration,
Loop checking, Functional test, Pre-commissioning, Commissioning, etc...
1) Client :- QATAR GAS & DOLPHIN ENERGY (Dec-2010 TO Feb-2011)
Company :- BLACKCAT ENG & CONSTRUCTION COMPANY WLL
Worked in Qatar Gas Nitrogen Project Calibration, Loop
checking, Functional test, Pre-commissioning, Commissioning, etc...
Client : QATAR PETROLIUM -DKW (Jun-2010 to Nov-2010)
Company: - BLACK CAT ENG AND CONSTRUCTION COMPANY WLL
Working in DUKHAN WATER INJECTION PLANT for Calibration,
loop checking, functional test, precommissioning, commissioning,
UPGRADATION OF ALLEN BRADLEY SLC 5 AND PUMP MANAGEMENT SYSTEM
2) Client :- QATAR PETROLIUM-FSP
Company: - BLACK CAT ENG AND CONSTRUCTION COMPANY WLL
Worked in GAS STRIPPING Process Plant ( Dec 2009 TO Jun-
2010) for Calibration, loop checking, functional test, precommissioning,
commissioning, up gradation of ABB advanta 400 to ABBxA800 system and ICS
XXX ESD system, expansion of new control building and up gradation of blow
down system and smokeless flare, and startup activities of all the
Instruments. Working in FIRE AND GAS System, Gas Turbines PLC (ALLEN
BRADLEY,).
Client: - QATAR PETROLIUM - EPIC FOR CREATION OF CORROSION INHIBITION
FACILITIES AT THE WELLHEAD WITH GAS LIFT
Company: - BLACK CAT ENG AND CONSTRUCTION COMPANY WLL
Worked on Calibration and checking of all type of
Instruments such as transmitters (level, flow, temperature, pressure),
control valves, relief valves, solenoid valves, controllers (level,
flow, pressure, temperature), regulators,, detectors (flame, gas and
fire), orifice plates,
3) Client: - TRICHI CHEMICAL PLA NT - COMMISSIONING OF DISTILLERIES
Company: - GLOBAL TOTAL INSTRUMENTATION
Worked in Distilleries (20-JULY-2009) for the
calibration, loop checking, functional test of all types of instruments
such as transmitters (level, flow, temperature and pressure),control valves
and switches.
4) Client:- MESAIEED POWER CORPORATION LIMITED- 2000 MEGA WATT COMBINED
CYCLED POWERPLANT (CCPP) MESAIEED PROJECT, QATAR
Company:- NOVELLO ( ITALLIAN COMPANY)- Under the contract of IBERDROLLA (
SPANISH COMPANY)
Worked in power plant (10-APRIL-2009 TO 06-JULY-
2009) for the commissioning of GAS TURBINES, STEAM TURBINES of G.E (GENERAL
ELECTRICALS) and BOILERS (IBERDROLLA).And Calibration, loop checking, and
functional test of various type of instruments.
5) Client:- RELIANCE REFINARY LTD. JAMNAGAR, GUJARAT
Company:- HYPERION IT PVT LTD. CHENNAI
Worked in refinery (OCTOBER-2008 TO MARCH-2009) for the
calibration, loop checking, functional test, precommissioning and
commissioning.
6) COMPANY: NATIONAL THERMAL POWER CORPORATION (NTPC)
From (JAN 2008 to SEP 2008)
Worked in maintenance department of instrument in National
Thermal Power Corporation, KAYAMKULAM, KERALA. Assigned as instrument
technician for maintenance of various of instrument of turbine and boiler
air compressor etc
7) HINDUSTAN NEWSPRINT (I) LTD, KOTTAYAM
From: - Aug 2006 to Nov 2007
Assigned as instrument technician to maintain and
conduct preventive maintenance of all electronic and pneumatic instruments
associated with PAPER MACHINE, CMP, CP and DE- INKING PLANT
Educ ational Qualifications:
S.S.L.C passed with 62.50% in 2002 from Kerala INDIA
Higher Secondary passed with 60.5% in 2004 from Kerala INDIA
Technical qualification:
Two years NATIONAL COUNCIL FOR VOCATIONAL TRAINING as an Instrument
Technician from Kerala with 74.14 %
Functional summary:
> Calibration & installation of all instruments related to oil
field Involved in pre-commissioning and start up activities of
the instrumentation loops and plant equipments.
> Loop checking & Functional test of field instruments from the
DCS console.
> Preventive maintenance and Corrective Maintenance and Component
level fault finding and rectification of electrical, electronics
and Instrumentation equipments.
> Skilled in calibration of pressure, level, temperature, flow,
vibration, transmitters, pneumatic control valve and FIRE AND
GAS instruments
> Calibration of alarm and tripping instruments Pressure, level
and flow switches well skilled in calibration and trouble
shooting of the following.
Smart transmitters: -
ROSE MOUNT, YOKOGAWA, SIEMENS, ENDRESS & HAUSER, HONEYWELL, ABB, FOXPRO
Control valve, on/off valve: -
FISHER,SIEMENS, MASONIELEN, BELLS, etc.
MOV (Motor Operated Valves) :-
Biffi, Rotork
Personal Information:
Father's Name : Gopalakrishnan Nair
Gender : Male
Nationality : Indian
Date of Birth : 09/04/1987
Marital Status : Married
Passport No : G8289806 (Date of Exp: - 06-APRIL-2018)
Languages Known : English, Hindi, Malayalam and Tamil
Personal Strengths:
. Hardworking and result oriented as an individual and in a team.
. Strong leadership capabilities.
. Always loyal to my authorities and responsibilities.
. Strong analytic and problem solving skills together with good
interpersonal & organizational skills.
Address:
Gireesh G. Nair
Ph. +91-486*-******
ThelakkattU
Mob: +918*********
Kallarkutty PO,
E-mail:- ***********@*****.***
Panamkutty, Idukki
Kerala, INDIA
Pin-685562
Considering my work experience and qualifications I would like
to apply for the post. Therefore, I am enclosing my CV with for your kind
attention.
Thanking you,
Date:
Gireesh G Nair
Contact this candidate