Project Power Plant
Resume:
CURRICULUM VITAE
Mohammad Shameem Alam
E-mail: ************@*****.***
: ******.*****@*****.***
Present Address
C/o. Syed Nesar Alam
Room No.-B/304, 3rd Floor
Chandresh Mandir, Lodha Complex
Mira Road (East)
Mumbai - 401107
Seeking a quality environment where my knowledge can be shared and enriched looking for the
opportunity of Senior Instrument Commissioning technician where I can improve my quality and
system manager of skills and realize my under guidance
Senior Instrument Commissioning Technician
Post Applied for :
Total Experience : 09Years (07 Years Gulf, 02Years Indian)
Qualification : B.SC Passed Physics owners From Bihar University (India)
Technical Qualification: 3Years Diploma in Electronics &Instrumentation Engineering From
Nadgir Polytechnic Bangalore in 2002, (India)
Computer Skills:
MS-Office (Word, Excel, Power Point), Internet, e-mail
Trainings/seminars:
Work permit seminar Conducted by Chiyoda TECHNIP JV QGX project, Doha Qatar.
H2S& Breathing Apparatus seminar Conducted by Qatar gas QGX project Doha Qatar.
Permit to Work (PTW) Training Qatar gas QGX project, Doha Qatar.
Hot work & Cold work Operation Training Conducted by Qatar Gas QCS project, Doha
Qatar.
First Aid Training Conducted by Indian Red Cross Society, India.
H2S Training Conducted by ADGAS ABU DHABI UAE..
Confined Space Training Conducted by ADGAS ABU DHABI UAE.
Log out Tag Out Training Conducted by ADGAS ABU DHABI UAE.
Pre Mechanical Commissioning Training Conducted by ADGAS ABU DHABI
UAE.
Brief Summary:
Offering over 09 years of full and Comprehensive Experience in Instrumentation Works that
Includes Installation, Calibration, Loop checking and Functional Checking.
Preparation of Start-up Procedures, Manual Preparation.
Pre Commissioning, Commissioning Activities, Trouble Shooting and Repair.
Also I have experience As a TRICONEX (FGS&IPS) AMS, MMS (BENTALY NEVADA) and
DCS (EMERSON DELTA –V FOXBORO) Console Operator...
Site Modification of all Instrument Installation Work for Oil &Gas Project.
Maintenance work in Liquefied Natural Gas (LNG) Plant.
Brief Experienced in Handling Electronic, Pneumatic, Hydraulic and Fir & Gas Instrument.
Previous Experience Profile
Gulf Experience – 07 Years
Period : From 10 March 2011 to 06June 2012
Position : Instrument Commissioning Technician
Employer : SAUDI Arabian Kentz Co.Ltd
Client : SAUDI ARAMCO KSA
Project : DIESEL HYDRO TREATING PLANT
Project Description:
BI-0010 DIESEL HYDRO TREATER COMPLEX, Yanbu Refinery,
Scope: Commissioning of DHT, SRU (2 Trains).ARU, SFU & SWS Units
Saudi Aramco is the largest supplier of crude oil and natural gas liquids in The World .The
Company is Involved in the Exploration Refinery, Sales Marketing & Shipping of Petroleum,
Products on Every Continent, It has joint Venture partners in Asia, Europe and the United States.
Its fleet of supertankers sails the seven seas.
Period : From 10May 2009 to 04October 2010
Position : Instrument Commissioning Technician
Employer : CTJV Qatar GAS, Qatar KENTZ (Engineers & Contractors)
Client : Qatar Gas Co. Ltd Ras Laffan Qatar.
Project Ras Laffan Onshore “QCS” project TRAIN 6 & 7 (QATAR)
Period : Form 02June 2008 to 07May 2009
Position : Instrument Commissioning Technician
Employer : Laffan Refinery, Qatar KENTZ (Engineers &Contractors)
Client : Qatar Gas Co. Ltd Ras Laffan Qatar.
Project : Ras Laffan Onshore “LAFFAN Refinery Project” (QATAR)
Period : Form 28July 2007 to26May 2008
Position : Instrument Commissioning Technician
Employer : CTJVRAS GAS, Qatar KENTZ (Engineers &Contractors)
Client : RAS Gas Co. Ltd Ras Laffan Qatar.
Project : Ras Laffan Onshore “Expansion Project” AKG 2(QATAR)
Project Description:
World’s Largest LNG Terminal – Ras Gas -QATAR
Scope: Construction/ Commissioning of Liquid fide Natural Gas Terminal
Employer of QATAR KENTZ W.L.L for their
Ras Gas /Qatar Gas Onshore Expansion Project in the state of QATAR
Ras Gas /Qatar Gas are the largest supplier of natural gas liquids in the world. The company is involved
in the exploration refining, sales, marketing & shipping of petroleum products on every continent. It has
joint venture partners in Asia, Europe and the United States.
Period : 10March 2006 to 10May 2007
:
From 03 February 2006 to 03 March 2007
Position : Instrument Commissioning Technician
Employer : Cegelec France (CB&I)
Client : ADGAS ABU DHABI
Project : ADGAS LNG DAS ISLEND OFFSHOR
Project Description:
Up gradation of existing Gas Turbine, All instrumentation works of new Gas Turbine, Installation of
marshalling cabinet and console of Distributed control system (DCS) and programmable logic controller
(PLC), vibration monitoring system (VMS) and emergency shutdown (ESD). According to drawings
supplied by client and data supplied by the client, as per ADGAS STANDARD AND
SPECIFICATIONS
Period : From03September 2004 To November2005
:
From 03 February 2006 to 03 March 2007
Position : Instrument Technician
Employer : Kentz Caspian Ltd Azerbaijan
Project : C&WP PCWU Baku Azerbaijan OFFSHOR
Domestic country Experience 1 YEARS06Months
POWER PLANT:
Construction of 475MW Power Plant of N.T.P.C at Ramagundam, INDIA
Company : ELMATICS Engineers Private Limited LTD India.
Client : National Thermal Power Corporation
Position : Instrument Commissioning Technician
Project : Power Plant, Ramagundam (INDIA)
Duration : 06March 2004 to 06July 2004
GAS PLAN T:
Company : TECNIMONT ICB ENGG &CONTRUCTROS LTD India.
Client : Gas Authority of India Ltd
Position : Instrument Maintenance Technician
Duration : 14January 2003 to 19January 2004
PETROCHEMICAL:
Company : B.P.C.L. Chembur Mumbai LTD India
Instrument Maintenance Technician
Position :
Duration : 10.09.2012 to Till Now
Nature of Job:
Studying the work scope, contractual documents & planning further and organizing the
schedule of the project optimally.
Leading a team of Technician briefing them their daily work and monitoring the progress at a
closer level, solving the Constrains and liaison with the client to their satisfaction.
Monitoring, Maintaining and training the work team. Also motivating them time to time.
Co-coordinating material handling team to make follow up the material require during the
executing the project and to maintain records of materials.
Coordinate with different vendors and Control System Group & other various discipline to
ensure proper workflow.
Carryout Installation, Commissioning, Repairing, Maintenance and Troubleshooting various
electronics and pneumatic instruments used to make measurement and control the different
parameters like Temp, Flow, Level, Pressure Density etc.
Maintenance Loop Checking, Trouble shooting and Calibration of all process instrument
plant.
During loop check, check Instrument index,Data sheet,Flow rate range, Engineering,
Unit, Alarm, Settings, ESD/DCS transmitter maintenance, ESD valve On-Line test,
Sequence of Events, Service Description, Bad input/output, Annunciator panel, P&ID
drawing, Location drawing, Transmitter failsafe burnout, ESD logic,
Verification of Transmitter software configuration, check hardware address according to
instrument loop diagram such as, Device Type, Module, Channel & Slot no:. Prior to
represent to the client before final Loop Checking.
Primary elements to final control element like T/C, RTD, Gauge Switches, Transmitters,
Recorder, I/P Converter Controller and control Valves related to all parameter.
Functional and logic testing, Fire & Gas system, Motors & all related interlock system.
Calibration and Maintenance of Fire and Gas Detection Systems such as Flame Detectors
(UV/IR detectors &UV detectors), Fire Detectors (Heat detectors, Temperature switches,
Fusible plugs/quartz bulbs, RTD etc Flammable Gas Detectors (LEL detectors-Methane,
butane, propane etc Toxic Gas Detectors(H2S), Smoke detectors(optical& Ionization
types), Manual Alarm Call points.
Line monitoring of F&G contact input devices
High expansion Foam system for LNG spill basin monitoring
Fire Suppression systems such as Deluge system, water spray& Foam system, FM200
system, CO2 system.
Experience in Public Addressing General Alarm Systems.
Infrared, UV fire and Heat Detector System, Detronics UV IRX5200.
Fusible plug-burn out set point.
Optima Plus (Sieger) Open path flammable gas Detector, Zellweger Analytics, searching
excel Infrared gas detector (dvc100/DX100/DX100m).
Manual Alarm calls point (Fenewell 3G2ECR, MEDC MG1665P).
O2 Detector, O2 transmitter( Drager2xP).
GDF&GDT (Draeger, Zellweger Analytics, Polytron 2xP-EX, 2xP TOX).
Temperature &Pressure switch (Thermo stick MST26, DAF Delta VM2) Etc.
Working experience with smart type of Transmitters, uses of HART Communicator.
Well versed on PID drawing, Schematic, Logic, Single line Wiring diagrams, Feedback,
Cascade, and Loop checking and Trouble shooting.
Preventive and schedule maintenance, routine checkup, function testing of instruments
loop.
Every day log book and log sheet maintenance.
Safety Works Skill :
Familiar behavior with client & company safety.
Respect & own company’s operating & core values.
Follow Company’s quality & administrative procedure.
To create environment of Safety at workplace by creating awareness through training
programs, safety initiatives etc.
Attended Behaviors Based Safety and training Programs.
Attending & organizing the weekly safety meeting with the instrument team supervisor,
foreman and Technicians.
Types of Systems Handled
Honeywell TDC 3000 DCS, Foxboro I/A Series DCS/Delta V Emerson, 9.3.1 Version Speed Tronic
Gas Turbine control system Mark VI, Triconex 1131.1Version ESD systems, Allen Bradley PLC'S, F &
G Minerva 80, FSC (Honeywell), CCC for turbine over speed control system, MMS BENTALY
NEVEDA 3500 etc.
Worked with the make of:
VALVES: On-Off Valves, Control Valves with Digital (HART) Valve Positioner of Fisher Rosemount
DVC 6010, 6020 & 6030, Siemens, Adamas, Neles Jamesbury ND-800/900, Valtake, Masonelian SVI,
Severn Glocon. Anti surge Control Valves (CCI Drag, Fisher).Sequence Ball Valves (Orbit
Valves).MOV’s Of Rotork, Biffi.
TRANSMITTERS: Pressure, Flow, Level, Temperature. SMART Transmitters Of, Rosemount,
Yokogawa HAUSSER DRUCK H&B with Hart Communicator 275,375, Amtek, Vortex Flow Meters
(Yokogawa), Electromagnetic Flow Meters, Turbine Meters etc
LEVEL TROLL: (Displacement Transmitters) Of Magnetrol, Masonelian, Foxboro Eckardt & Tokyo
Kaesio With HART Ability.
SWITCHES: Pressure, Temperature, Level of Asco, Ashcroft, ITT Barton, Switzer, Magnetrol, Spirax
Sarco, Tokyo Keiso.
SAFETY VALVE: Of Crosby, Anderson-Greenwood, IMI-Bailey Brikett Ltd, Moore India
HANDLING CALIBRATION SHOP & TEST EQUIPMENT :
DC Power Supply- Druck Calibrator-DPI-601, DPI-610IS, DPI-61X IS- Ranges -1 To 2/10/20/ (135
Brag Hydraulic) For Pressure And Vacuum Generator, Wallace & Tiernan For Precision Pneumatic
Calibration, Dead Weight Tester- Budenberg 580 (0 To 700 Brag )PC-6Pressure Calibrator (0 To 700
Brag)
Beamex V/A Calibrator-BIC 200, Beamex Precision Temperature Calibrator-TC 301,Dry Block Temp-
Calibrator–Tempcal II, Digital Thermometer- PROMAC Calibrator-Hathaway, Minical RTD- Haven
Automation, Resistance Box- Time Electronic, Multifunction Calibrator-Unomat VAX-II, Multifunction
Process Calibrator-Unomat-TRX-II Loop Tester-Unomat-UPS-II, Function Generator (Frequency) –
ITT/R.S, Fluke Multimeter 73,75III,23,23III,80,83III, 87, 88, 177, 175.Vobulator-TK3, Vernier Calliper-
Hazet, MA/MV Source-Time Electronic.
Electrical: Circuit Breaker Tester (Secondary Current Injection)-Hypertonic, Primary Current Injection-
Foster, Digital Techometer -Shimpo, Oil Tester-AVO International, Digital Clamp Meter, Insulation
Tester –0 to 1/5 KV-Megger-6410, AC Hipot Test Set- Hipotronics.
SPECIAL SKILLS
Instrumentation and Control System
Distributed Control System
Computer Literate
Personal Details
Name : Mohammad Shameem Alam
Father's Name : Md. Tahir Hussain
Date of birth : 05June1983
Marital Status : Single
Nationality : Indian
Languages known : English, Hindi & Urdu
Permanent Add. Vill- Mansha Tola (Bettiah)
Post-Barwat Pasrain
Distt.-West Champaran, State-Bihar
Contact No. : +919*********, 062********
Passport Details. Passport No : K-7605068
Date of Issue : 07.11.2012
Date of expiry : 06.11.2022(F)
Place of Issue : Patna (Bihar)
Old Passport No: E-8071748
Hobbies. My Various hobbies like playing Game, Bick Ridding, Reading books, and Traveling,
Strength : Fast learner
Good communication
I hereby declare that the above information is correct to the best of my knowledge. I
trust this enclosed for your kind perusal.
Looking forward to the favorable consideration and assuming and best Service
( Mohammad
Place :
Shameem Alam)
Contact this candidate