Ch.sateesh
Mobile:+968-********
Email:***********@*****.***
*****************@***.***
CURRICULAM VITAE:
Career Objective:
To provide value addition to the organization by utilizing my technical
knowledge.
To grow in the organization by accomplishing the tasks
allotted to me sincerely,
There by becoming an asset to the organization.
Desired Position: RF Drive test/Optimization Engineer-
4G/3G/2G
Work Experience- 5 years.
Huawei (OMANTEL 4G/3G/2G)-LCC Middle East FZ - LLC.
RF Drive Test & Optimization (Oman-Muscat) March 2012 till date
Job Responsibility:
. 2G Drive Test Motorola and Ericsson to Huawei SWAP Project (Omantel
network)
. 3G Drive Test Complaints and SSV .
. LTE Technical Site Survey.
. LTE DriveTest complaints,SSV and cluster drives
. Using Tools Genex Probe ver 3.3,3.5, Genex Assistant ver 3.3,3.5
. Making the pre and post drive reports in Genex Assistant 3.3 and
submitting to customer.
. Making Intra freq, Inter freq and IRAT neighbor list for UMTS network
. Daily monitoring of network KPIs and in case of any degradation, send
a complete analysis along with the recommendations to customer using
Network statistics or field data in order to improve KPIs of Network
or Cell level.
Huawei (AIRCEL 2G/3G)- Prithvi information solutions Pvt Ltd.
RF Drive Test & Optimization (Hyderabad,A.P.) Feb 2011 to March 2012
Job Responsibility:
< Verifying soft handover, 3G to 2G IRAT handover, 3G to 2G IRAT cell
reselection, and Analysis of network performance, identification of
problems and providing suitable solutions to performance
abnormalities.
< Monitoring 3G KPI by means of RRC connection setup rate, RRB Setup
success rate for 2G to 3G IRAT cell reselection
< Monitoring of RSCP & EC/Io level of 3G sites.
< Trouble shooting and resolving issues like call drop and handover
failure
< Analysis of layer 3 message.
< Finding the best possible configuration for antenna heights, tilts and
azimuths for all the cells/sectors in the network and thus responsible
for optimization of the network
< Handling customer complaints related to EDGE/HSDPA and Video call.
< Monitoring of Node B traffic trend
< Recommend Node B rollouts to resolve coverage issues
< Analyze post-processed drive test data to benchmark network
performance against competitors, check dropped call, coverage and
dominance issues, verify need to modify antenna electrical/mechanical
tilt, antenna orientation or re-engineer existing BTSs, recommend need
for parameter adjustments, etc.
< Analysis on network/RNC level and give recommendations to change
parameter Speech, Video, PS and HSPA, CS AMR, CS 64, PS and HSDPA
dropped rate.
< Drive test for 3G network and analyzing the report.
< KPI for the improvement of network.
< Daily KPI monitoring for BSCs, RNCs and Report if any KPIs are
abnormal.
< Worst Cluster Analysis and give recommendation to Improve KPI.
< Planning of new Micro and COW NodeBs.
< Coordinated with DT teams and Customer in getting 3G RF AT Signed.
< Responsible for maintaining good KPI's.(RRCSR, HOSR-SOFT, RRB, SD
Blocking, AFR)
< Monitoring Key Performance Identification (KPI) of 2G by means of
SDCCH/TCH drop calls, call set up success rate, handover success rate
and congestion rate, and conducting Final acceptance Report by means
of statistics and drive test measurements. Compile sites in BSC for
any locked hardware and TRX related disabilities. Top Handover Fails,
SDCCH traffic deltas and TCHblocking cells.
< Performing interference analysis. Distinguishing internal and external
interference. Resolving internal interference by hardware checking,
frequency optimization (replacing frequency, frequency hopping, power
control, etc), site survey. Resolving outside interference by locating
interference source.
< Database consistency checking for parameter setting and LAC & BSIC &
BCCH mismatches. Analyzing neighboring cell definition and optimizing
Neighboring cell relation including outside neighbor cells.
< Performance stats/KPI analysis for drop calls, TCH congestion, SDCCH
congestion, location area update, handover success rate and paging.
< Drive Test Data analyzing then Optimizing parameters like C/I, C/A,
Coverage, Call Handover, Call Drop & Rx Quality, SQI and Network
Performance analyze.
Huawei (AIRCEL 2G)-GTL Innosource Pvt Ltd.
RF Drive Test & Optimization (Hyderabad,A.P.) Oct 2008 to Feb-2011
Job Responsibility:
.
< Detailed RF design, including BSC location and new site selection.
< Planned New town sites based on marketing and sales requirement
< Monitoring some parameters of KPI's (HSR, TCH Blocking, SD Blocking)
and planning to keep those values with in Bench Marks. Detailed
Planning of IBS & Link Budgeting.
< Analyze the drive test data and identifies problem areas with
recommended solutions.
< Radio Network Optimization using Drive Test Tool GENEX PROBE,GENEX
ASSISTANT& TEMS Investigation GSM 6.0, post processing with TEMS
route analyzer 6.0.
< Perform antenna audit to assure the correct setup based on the RF
design. Recommend and implement changes in various network parameters,
antenna configurations, etc.
< Collect performance metrics and generate plots to highlight
performance improvements.
< Keep an up to date documentation of optimization related actions, also
maintain archives of all collected data for future reference perform
the Optimization System Performance Support: Troubleshoot areas with
poor RF performance. Request drive tests, analyze data, and recommend
network changes.
< Performance stats/KPI analysis for drop calls, TCH congestion, SDCCH
congestion, location area update, handover success rate and paging.
< Drive Test Data analyzing then Optimizing parameters like C/I, C/A,
Coverage, Call Handover, Call Drop & Rx Quality, SQI and Network
Performance analyze.
< Drive Data Analyzing then Optimizing activities include change of
frequency, change of power, Re-orientations, mechanical tilt,
electrical tilt, and height changes.
Job Profile:
RF &TND Survey:
< RF nominal planning and providing the search rings.
< Choosing the site options so as to be in grid.
< Designing Antenna height and Orientation for RF Coverage.
< Identification of null area and proposing the solutions to the
customer to enhance
< Coverage.
< Clutter definitions and its prioritization.
< Capacity enhancement solutions.
LOS survey:
< Checking for obstacle details that may obstruct the transmission path
of MW link
as planned.
< Extraction of AMSL values from topo maps.
< On field obstacle heights collection of transmission path of PTP mw
link.
< Path Profile generation and verification for the PTP Microwave links
using RL tool.
< Proposing the optimum height of antenna keeping in view the height of
obstacles
and clearance criteria.
< Generation and submission of LOS survey reports.
Tools used
< Google Earth: To check out details of clutter while planning new
sites.
< MapInfo, MCOM,( GSM Application etc)
< Thorough skills on drive test on GENEX PROBE 1.5,2.3,3.3,3.5 GENEX
ASSISTANT 1.5,2.3 3.3,3.5 &TEMS Investigation 8.0.2,10.03,04 Layer 2 &
3 analysis to troubleshoot a problem. Post processing in Tems
Investigation / MapInfo (Optpcs).
< M2000, M4000 for getting the reports from BSC.
< Genex Naster fetching the reports from BSC and M2000/M4000 & cross
verification of RF Engg Parameters.
< Genex Probe & Assistant for drive test and analysis.
< M2000/M4000 for generating KPIS & Alarms.
< TCPU/UNET/Atoll/RNDfor predication and AFP (Automatic frequency
tunning/NeighborPlanning).
Educational Qualificaton:
< Intermediate Margadarshini College AP 2003
< High School from Bharath High School in 2001
Professional Qualification:
* B.Tech from JNTU. Uiversity in 2008.
About Myself
High Energy and a drive to excel have differentiated me throughout my
Career. Taking initiative is definitely strength but I also see differently
every task I take up. Respect for time and ability to work hard are other
strengths.
Personal Details:
* Date of Birth : 31-03-1985
* Father's Name : Mr. Ch.Kanakachandru
* Languages Known : English, Hindi,Telugu,Arabic
Date:
Place: (Ch.Sateesh)