Mechanical Engineering
Resume:
[ ] [ ] [ ]
[ ] [ My
Experience ]
Rodger
Moore
Richmond, B.C.
Canada
V7E 4M3
Phone : 604-***-****
Cell Phone : 778-***-****
: abqpyr@r.postjobfree.com
JOB OBJECTIVE
To hold a position of responsibility
commensurate with my experience. A position calling for good public relations and an
ability to communicate. I have highly developed skills, an excellent command of English,
and a willingness to meet the challenge of new learning situations.
Top of
Page
Work Experience in Drafting
SKS Engineering (Dec. 2010 -
Present).
Burnaby, B.C.
(Mechanical Draftsman using Autocad 2005)
Work done at SKS Engineering was mainly the design and drafting of sawmills.
Ferenco Engineering (Nov. 2007 - July 2010).
Delta, B.C.
(Mechanical and Structural Draftsman using Autocad 2000)
Work done at Ferenco was mainly the design and drafting of Limestone crushing plants and
lime production facilities.
Reference:
Craig Shaw 604-***-****)
Axxent Engineering (June 2006 - Oct. 2007)
Surrey, B.C. (The forestry branch of U.M.A. was sold and became Axxent Engineering)
(Mechanical Draftsman using Autocad 2000)
Work done at U.M.A. was mainly the design and drafting of residual conveyors and rake-back
conveyors and other equipment for O.S.B. (Oriented Strand Board) plants as well as
structural steel and structural foundations..
Projects: Grant Allendale Inc. Greenfield OSB
Facility in Allendale South Carolina.Grant Clarendon Inc. Greenfield OSB
Facility in Clarendon County, South Carolina .
Reference:
Peter Smith 604-***-****)
U.M.A Engineering (Jan. 2004 - May 2006)
Surrey, B.C.
(Mechanical Draftsman using Autocad 2000)
Work done at U.M.A. was mainly the design and drafting of residual conveyors and rake-back
conveyors and other equipment for O.S.B. (Oriented Strand Board) plants. Also, general
arrangement drawings for Dynamotive energy cogeneration plant.
Projects:Meadow Lake OSB Limited Partnership
(Tolko)Greenfield OSB Facility in Meadow Lake, Saskatchewan, Canada.Dynamotive energy cogeneration
plant.
B.E.P. Engineering (Oct. 2003 - Dec. 2003)
Surrey, B.C.
(Mechanical Draftsman using Autocad 2000)
Duties included the design and drafting of proposal drawings for various sawmills.
Anthony-Seaman Ltd. (Mar. 2003 - Aug. 2003)
North Vancouver, B.C.
(Mechanical Draftsman using Autocad 2000)
Duties included the design and drafting of various types of sawmill equipment such as
unscramblers, residual conveyors, distribution conveyors, transfer decks and rollcases.
U.M.A Engineering (Aug. 2002 - Feb. 28, 2003)
Surrey, B.C.
(Mechanical Draftsman using Autocad 2000)
Work done at U.M.A. was mainly the design and drafting of residual conveyors and rake-back
conveyors and other equipment for O.S.B. (Oriented Strand Board) plants.
U.M.A Engineering (Feb. 2001 - Jan. 2002)
Surrey, B.C.
(Mechanical Draftsman using Autocad 2000.)
Work done similar to above.
Anthony-Seaman Ltd. (Jan. 1999 - Nov. 2000)
North Vancouver, B.C.
(Intermediate Mechanical Draftsman using Autocad R14.)
Duties included the design and drafting of various types of sawmill equipment such as
unscramblers, residual conveyors, distribution conveyors, transfer decks and rollcases.
Murray-Pacific Design Services (Apr. 1998 - Dec, 1999)
Richmond, B.C.
(Intermediate Mechanical / Structural Draftsman using Autocad R14)
At Murray-Pacific I worked on a sawmill project designing different equipment for the mill
such as residual conveyors, distribution conveyors and transfer tables. I did both
structural and mechanical work. Also, I helped develop the Murray-Pacific 'lineal log
merchandiser' and 'log centering conveyor' by doing detailed drawing of all parts for
these machines.
Precision Services and Engineering and Raute Wood ( Dec. 1992 - Apr. 1998 )
Richmond, B.C. and New Westminster B.C.
(Intermediate Mechanical / Structural Draftsman using Autocad R14.)
The work I did for P.S.&E. included both mechanical and structural drafting and design
of O.S.B. plants. I started there working on the drafting board and then using Autocad for
about 3 years. Mechanical work included equipment such as residual conveyors, rollcases,
distribution conveyors and rake-back conveyors. My structural experience was mainly in the
layout and detailing of walkways but also included concrete foundations for equipment such
as flakers.
P.S.&E. was purchased by Raute Wood and moved to New Westminster. I continued working
on O.S.B. plants for a while and then started working on a L.V.L. (Laminated Veneer Lumer)
plant. I did detailed shop drawings for equipment which was built in our shop. I gained
experience using a parts database called Minx.
Anthony-Seaman Ltd ( Jan. 1991 - Apr. 1992 )
North Vancouver, B.C.
(Intermediate Mechanical Draftsman using Autocad R14)
Did the design and drafting of sawmill equipment such as unscramblers, transfer tables,
residual conveyors and distribution conveyors.
Precision Services and Engineering Mechanical ( Oct.1990 - Jan. 1991 )
Richmond, B.C.
(Intermediate Mechanical Draftsman, manual drafting)
All work in this office involved design and drafting of equipment in various paralam
plants. I did about two months in the mechanical department and two months in the
structural department.
Carroll Hatch Engineering Ltd. ( Jul. 1990 - Sept. 1990 )
North Vancouver, B.C.
(Intermediate Mechanical Draftsman, manual drafting)
Did the design and drafting of sawmill equipment such as unscramblers, transfer tables,
residual conveyors and distribution conveyors.
Industeck ( On Loan ) ( May 1990 - Jul. 1990 )
Delta, B.C.
(Intermediate Mechanical Draftsman, manual drafting)
Did the design and drafting of equipment for O.S.B. (Oriented Strand Board) plants.
Noram Engineering And Piping Constructors ( On Loan) ( Dec. 1989 - Jan. 1990 )
Vancouver, B.C.
(Intermediate Mechanical Draftsman, manual drafting)
Did checking of drawings for chemical plants as well as detailed piping drawings.
Nu-Westeck Engineering Ltd. (Jan. 1988 - Oct. 1990 )
New Westminster, B.C.
(Intermediate Mechanical Draftsman, manual drafting, and some Autocad R12)
Responsible for general arrangement and detail engineering drawings of sawmills and
planermills. Job included much field experience at B.C. Forest Products mill in Vancouver,
B.C.
Carroll Hatch Engineering Ltd. ( 1978 - 1982 )
North Vancouver, B.C.
(Intermediate Mechanical Draftsman, manual drafting)
Responsible for general arrangement and detail drawings of lumber handling equipment for
various B.C. sawmills.
Swann Wooster Engineering Co. Ltd. ( Mar. 1973 - 1978 )
Vancouver, B.C.
(Junior Mechanical, Piping, Marine, Structural Draftsman, manual drafting)
Wide variety of experience in the following departments:
Mechanical Department: Drafting of conveyors, stacker-reclaimers, train
unloading/shiploading drawings of various types.
Piping Department: Drafting of equipment for Oil unloading systems and trans-shipment
facilities; barge construction facilities including designing of service pits; as well as
field experience.
Marine Department: Drafting of container handling feasibility study with extensive
underwater map work; for dredging study; ship berthings including berthing
dolphins/mooring dolphins
Structural Department: Drafting of railcar construction and paint shop in Squamish
B.C.
Colmat Cranes & Materials Handling Mechanical Equipment Ltd. ( Jan. 1973 - Mar.
1973 )
North Vancouver, B.C. (Owned by Munk Canada Ltd.)
(Junior Mechanical Draftsman, manual drafting)
Responsible for shop drawings of overhead cranes; experience with shop processes and crane
construction as manufacturing was carried on in same building.
Top of Page
Other Work Experience
Chemistry Stores
Assistant
( Aug. 1983 - Dec. 1988 ) University of British
Columbia
Vancouver, B.C.
Janitorial Service
( March 1983 - Sep. 1983 ) Self-Owned
North Vancouver, B.C.
Top of Page
Education
1989 Course : Computer
Aided Drafting (ACAD)
Kwantlen College
Richmond, B.C.
1988 Course : Programming
in Basic
University of British Columbia
Vancouver, B.C.
1987 Course : Graphic Arts
University of British Columbia
Vancouver, B.C.
1986 Course : Computer
Aided Drafting (ACAD)
Tutorial Correspondence Studies
1985 Course : Basic
Computer
Point Grey Secondary ( Night School )
Vancouver, B.C.
1973 of Mechanical &
Architectural Drafting
Vancouver Vocational Institute
Vancouver, B.C.
Studied basic drafting of pulp-
and sawmill; building house design including perspective drawings and floor plans; as well
as mathematics.
1971 Graduated, Point Grey
Secondary School
Vancouver, B.C.
Courses included : drafting ( 2
years ), mathematics, physics, mechanics, woodwork and French.
Top of
Page
My Experience
Over
the years my experience has mainly been in Forest Industry related design and drafting. At
both Carroll Hatch and Anthony Seaman I gained much experience in sawmill design. At
Precision Services and Engineering work there was related to O.S.B. mills. For the past
few years I have been working on detail design of Lineal Log Merchandisers as well as many
engineering projects for Murray-Pacific.
My
main area of experience has been in mechanical drafting however at P.S. & E. I was
mainly doing structural. At various times I have done piping, marine, and civil drafting.
I
have been working in Autocad for approximately five years and have a great knowledge of
computers.
Contact this candidate