Engineer Software
Resume:
Title:Claude Cassano
*****-****.*******@******.****.***
Document
Source below
NAME: Claude Cassano
ADDRESS:
CITY: Mountain View
STATE/PROVINCE: CA
ZIP/POSTAL CODE: 94041
COUNTRY: USA
EMAIL: *****-****.*******@******.****.c
PHONE: 415-***-****
CANDIDATE ID: N/A
CITIZENSHIP: US
Citizen
EDUCATION: Not Entered
EXPERIENCE: Not Entered
WILL RELOCATE: Not Entered
RELOCATION INFO: Not Entered
JOB WANTED: Not Entered
HOMEPAGE:
COMMENTS:
HOTSKILLS:
ESUME
Claude Michael Cassano
1822 Higdon Ave. #1
Mountain View, CA 94041
*****-****.*******@******.****.***
OBJECTIVE
Software/Firmware Programmer/Engineer
SUMMARY OF QUALIFICATIONS
SOFTWARE / FIRMWARE, EMBEDDED SYSTEMS DESIGN & DEVELOPMENT
Windows, DOS, UNIX, AMX, MultiTask!, pSOS+ OPERATING SYSTEMS
10+ years C, 4+ years C, 80x86, 68xxx, Z80, 8085, 68xx, 65xx
Assembly languages
15 years Embedded Systems - 4+ years Real-Time Embedded
2 years Windows Programming: Applications/Drivers
Extensive experience in design, development, test, debugging, and
maintenance of real-time embedded system software for
microcontrollers & microprocessor based systems.
Claude Michael is a software/firmware programmer/engineer with
extensive experience using state of the art development tools
including
the coding of 8086, 80188, V25, V40, 68000, 68302 processors in C & C
using remote source level debuggers. He has designed, developed,
debugged, documented, tested, and maintained code of and for numerous
engineering projects including Windows drivers, network telecom,
medical, and industrial equipment; to include control, and motion
control firmware for stepper, servo, AC & DC motors directly and
through
board level interfaces; under various operating systems including
Windows, DOS, UNIX, X-Windows, pSOS+,AMX, MultiTask! both
independantly and as a team member.
Claude Michael has brought projects from conception to shipment,
and breathed life into dying projects. He can do the same for you.
Professional License:EIT #XEO85227
EMPLOYMENT
CPI, Satcom Division (formerly Varian);Palo Alto, CA
Contract
Software Engineer thru Lloyd-Ritter Consulting,
Inc
.(9/98-NOW)
Performed Contract Programming to design, develope, and debug command
and control software for satellite communications power amplifier
systems.
Utilizing Object-Oriented Techniques, developed user interface and
RS232/422 communications software for Windows 95/NT applications using
Visual Basic and Visual C, including developing and using ActiveX
(OCX) Controls
L3 Communications, Inc
.;Santa Clara, CA
Contract
Software Engineer thruMidcom Corporation (2/98-7/98)
Performed Contract Programming to modify and enhance a satellite
telecom system Ported BSD UNIX C code to GNU C for Linux.
Added code to provide TCP/IP socket Network communications.
Developed UNIX/Linux Device Drivers in C for BiDirectional Parallel
Port, HDLC Serial, and Telemetry Communication Boards.
Development platforms included SUN SPARC UNIX Workstation, and Linux,
DOS, Windows 95 & 3.1 on PCs.
Canon Information Systems, Inc
.;Cupertino, CA
Contract
Software Engr thru Lloyd-Ritter Consulting, Inc.(5/97-8/97)
Performed Contract Programming to modify and enhance the Canon GP
Windows Printer driver release Version 2.3 R5, for Windows 3.x & 95.
Modified and enhanced C and C code, using Visual C, including MFC
Programming under Windows 95 on an MS/PCDOS environment
DIONEX, INC
.;Sunnyvale, CA
Contract
Software/Firmware Engr thru West Valley
Engineerin(10/96
-5/97)
Performed Contract Programming to develope, implement and debug
machine control firmware for a real-time embedded system 80188
microcontroller to control the DX-800 liquid chromatography analysis
system and LAN communications interface
Host Computer software.
Developed C code, using Borland C, Paradigm LOCATE, U.S.Software
MultiTask! RTOS, with SourceSafe Version Control System under
Windows 95 on an MS/PCDOS environment, and used Paradigm DEBUG,
and Checkmate-II Emulator for test and debug.
Developed the DX-800 from inception through Alpha and Beta stages to
shipping product.
LARSCOM
; Santa Clara, CA
Contract
Software/Firmware Engineer thru Sequent Assoc.(12/95-10/96)
Performed Contract Programming to develope, implement and debug
communication software for a real-time embedded system 68302
microcontroller for Transcoding E1/T1 Line Alarm signals, for existing
network telecomm products.
Also, fixed "bugs" in the existing product, and coded to bring up
the product upgrade.
Developed tight C & ASM real-time AMX/pSOS+ embedded system software
on SUN SPARC UNIX Workstation using Microtek Research 68xxx C & ASM
Compilers, and debugging with Free Form and X-RAY Debuggers with
Applied Microsystems 68302 Emulator.
Air Communications, Inc
.; Sunnyvale, CA
Contract
Software/Firmware Engineer thru Access Technical (3/95-6/95)
Performed Contract Programming to develope, implement and debug
communication software for a real-time embedded system 68302
microcontroller for autobaud-rate-detection, decode of a terminal data
stream independant of data rate without change of an SCC, configured
in transparent promiscous bisync mode, during reception.
Developed tight C real-time embedded system software on MS/PCDOS
environment, using CrossCode C, HMI emulator and Sourcegate Windows
embedded systems debugging tool.
Abbott Laboratories, Diagnostics Division
; Santa Clara, CA
Contract
Software/Firmware Engineer thru Intellitron (5/93-3/94)
Performed Contract Programming to bring up medical blood analysis
system, real-time embedded system 68302 microcontroller and
communication software for device and board level interfaces,
including interfaces to user data station, BAR CODE reader,
digital input and fluid sensor modules, motor and solenoid control
modules.
Developed C, 68xxx assembler, pROBE & pSOS+ real-time embedded system
software on MS/PCDOS environments, including the use of XRAY remote
debugger.
Advancing Futures
; Mountain View, CA
Contract
Software Engineer(2/92-2/93)
Developed C/C software tool packages for programmers, compatible
with DOS and UNIX operating systems and eightC, Ccompilers
including MicroSoft and Borland: including a BAR CODE printing package
to numerous printers or PCX file format; Windows 3.x applications and
DLLs; and X-Windows applications.
Developed software products from inception to shipment and handled
some technical support for them.
Microgenics Corporation
; Concord, CA
Contract
Software Engineer(Nov 91 to Jan 92)
Performed Contract Programming to develope serial communications for
medical diagnostic program, including menu-driven user interface.
Convac/APT
; Fremont, CA
Firmware/Hardware Engineer
(1/91-5/91)
Developed Firmware and Hardware for a Wafer Developer, usingC&
80x86 Assembly
Interrupt driven S100 based V20 embedded system controller,
including control for stepper and servo motor boards, LCD matrix
display, matrix keypad, and analog and digital i/o control boards.
Handled development from inception through to product shipment.
BioAutoMed Systems
; Sunnyvale, CA
Software/Firmware Engineer
(1/86-3/90)
Developed Hardware, Firmware, and Software for Medical Diagnostic
Centrifugal Chemistry Analyzers usingC and Z80 Assembler for program
development on MS/PCDOS platform for both IBMPC target and embedded
CPU targets.
Included Menu Driven Text User Interface for control of remote
devices and controllers; serial communications interfaces; and
dBASE & DBVISTA compatible DBMS; interrupt driven centrifugal
analyzer and fluid delivery system each requiring firmware for
direct motion control of stepper, servo, AC & DC motors while
monitoring digital input position sensors.
Designed, developed, and debugged Digital and Analog Hardware for
Medical Diagnostic Equipment.
Developed the ASCA-1 and Enterprise-1 from inception through to
product shipment.
Singer-Link / Flight Simulations Division; Ames Research Center
;
Moffett Field, CA
Hardware/Firmware Engineer
(7/83-4/85)
Implemented Hardware and Z80 Firmware for NASA Advanced Concept Flight
Simulator.
Adaptive Electronics
; Sunnyvale, CA
Hardware/Firmware Engineer
(10/82-7/83)
Designed products using TTL, Analog IC's, Z80 & Peripherals, Z80
Assembly Firmware.
Coberly & Associates
; Santa Clara, CA
Electronic Technician
(5/81-9/82)
Repaired Switching Power Supplies, VCR's, Video Cameras.
U.S. Army Communications Command
Crypto-Maintenance Technician
(4/77-4/81)
Trouble-shot and repaired electronic data and voice encryption
devices.
EDUCATION
M.S
. MathColumbia Pacific UniversitySan Rafael, CA
B.A
. MathCalifornia State University, ChicoChico, CA
B.S.E.E
.Cook's Institute of Electronics Engineering
Jackson, MI
Contact this candidate