Mechanical Engineering Design

Dept. of Mechanical Engineering

*** ***** ****** ********

Clemson, SC 29634-0921

******@*******.***

Phone: 864-***-****

Fax: 864-***-****

Resume of Mohammed Daqaq

EDUCATION

Ph.D. Virginia Tech 08/ 2006, Engineering Science & Mechanics

M.Sc. Virginia Tech 05/2003, Engineering Science & Mechanics

B.Sc. Jordan Uni. of Sci. & Tech. 01/2001,

Mechanical Engineering

PROFESSIONAL EXPERIENCE

2006-present: Assistant Professor, Department of Mechanical Engineering, Clemson University, Clemson, SC.

2003-2006: Research Assistant, Nonlinear Dynamics Laboratory, Department of Engineering Science & Mechanics, Virginia Tech, Blacksburg, VA.

2001-2003: Research Assistant, Digital Ship Laboratory, Department of Engineering Science & Mechanics, Virginia Tech, Blacksburg, VA. MEMBERSHIPS

Member, American Society of Mechanical Engineers, ASME (2003-present)

Member, American Institute of Aeronautics and Astronautics, AIAA (2004-present)

Member, Society of Experimental Mechanics, SEM (2004-present)

PROFESSIONAL ACTIVITIES

Vice Chair, Technical Committee on Modeling, Simulation, and Control, ASME Aerospace Division, Adaptive Structures and Material Systems Branch (ASMS), 2011-present.Guest Editor, ASME Journal of Vibrations and Acoustics, 2010-2011.Member of the Organizing Committee and Invited Session Chair, ASME Smart Materials and Structures Conference, Sept. 2011, Phoenix, AZ. Symposium Title: “Modeling Simulation and Control”.Symposium Organizer and Multiple Sessions Chair, ASME International Design and Engineering Conference, Aug. 2011, Washington, DC. Symposium Title: “Macro- and Micro-scale Device and System Design”.Symposium Organizer and Multiple Sessions Chair, ASME International Design and Engineering Conference, Sept. 2010, Montreal, Canada. Symposium Title: “Vibratory Energy Harvesting”.Symposium Organizer and Multiple Sessions Chair, ASME International Design and Engineering Conference, Sept. 2009, San Diego, CA. Symposium Title: “Energy Harvesting and Scavenging”.Member of the steering committee, The Fourth International Conference on Advances in Mechanical Engineering and Mechanics, Dec. 2008, Tunisia.Symposium Organizer, ASME International Design and Engineering Conference, Sept. 2007, Las Vegas, NV. Symposium Title: “Vibration-Based Sensing and Energy Harvesting”.

PUBLICATIONS

Refereed Journal Publications:

Daqaq, M. F., “On Intentional Introduction of Stiffness Nonlinearities for Energy Harvesting under White Gaussian Excitations,” accepted for publication, Nonlinear Dynamics, 2011.

Bassily, H., Daqaq, M. F., and Wagner, J., “Application of the Pseudo-Poincare Maps to Assess Gas Turbine System Health,” accepted for publication, ASME Journal of Gas Turbines and Power, 2011.

Masana, R., and Daqaq, M. F., “Relative Performance of A Vibratory Energy Harvester in Mono- and Bi-Stable Potentials,” Journal of Sound and Vibration, 330 (24), 2011.

Bibo, A., Gang, Li, and Daqaq, M. F., “Electromechanical Modeling and Normal Form Analysis of a Self-Excited Micro-Power Generator,” Journal of Intelligent Material Systems and Structures, 22 (6),2011.

Daqaq, M. F., and Donovan Bode, “Exploring the Parametric Amplification Phenomenon for Energy Harvesting,” Proceedings of the Institution of Mechanical Engineers, Part I, Journal of Systems and Control Engineering, 225 (4),2011.

Daqaq, M. F., “Transduction of an Inductive Bi-Stable Generator Driven by White and Exponentially-Correlated Noise,” Journal of Sound and Vibration, 330 (11),2011.

Daqaq, M. F., Alhazza, K., and Qaroush, Y., “On Primary Resonances of Weakly Nonlinear Delay Systems with Cubic Nonlinearities,” Nonlinear Dynamics, 43(11), 2011.

Masana, R., and Daqaq, M. F., “Electromechanical Modeling and Nonlinear Analysis of Axially Loaded Energy Harvesters,” ASME Journal of Vibration and Acoustics, 133 (1),2011.

Qaroush, Y. and Daqaq, M. F., “Vibration Mitigation in Multi-Degree-of-Freedom and Structural Systems Using Filter-Augmented Delayed-Feedback Controllers,” Smart Materials and Structures, 19, 2010.

Daqaq, M. F., “Response of Uni-Modal Duffing-Type Harvesters to Random Forced Excitations,” Journal of Sound and Vibration, 329 (18), 2010.

St. Clair, D., Bibo, A., Sennakesavababu, V. R., Daqaq, M.F., and Li, G., “A Scalable Concept for Mirco-Power Generation Using Flow-Induced Self-Excited Oscillations,” Applied Physics Letters,9, 2010.

Seuaciuc-Osorio, T. and Daqaq, M. F., “Energy Harvesting under Time-Varying Frequency Excitations,” Journal of Sound and Vibration, 329 (13), 2010.

Bradely, C., Daqaq, M. F., Bibo A., and Nader Jalili, “On Sensitivity Enhancement of Cantilever-based Sensors Using Feedback Delays,” ASME Journal of Computational and Nonlinear Dynamics, 5 (4),2010.

Starling, T., Daqaq, M. F., and Gang, Li “A Computational Approach for Pre-Shaping Voltage Commands of Torsional Micromirrors,” Computer Modeling in Engineering & Sciences, 2009.

Mahmoodi, S. N., Daqaq, M. F., and Jalili, N., "On the Nonlinear-Flexural Response of Piezoelectrically-Driven Microcantilever Sensors", Sensors and Actuators A, Physical, 153 (2), 171-179, 2009.

Seuaciuc-Osorio, T. and Daqaq, M. F., “On the Reduced-Order Modeling of Vibratory Energy Harvesters,” 20 (16), Journal of Intelligent Material Systems and Structures, 2009.

Daqaq, M. F., Stabler, C., Seuaciuc-Osorio, T., and Qaroush, Y. “Investigation of Energy Harvesting via Parametric Excitations,” Journal of Intelligent Material Systems and Structures, 20 (5), 545-557, 2009.

Daqaq, M. F., Abdelrahman, E. M., and Nayfeh, A. H., “Two-to-One Internal Resonance in Microscanners,” Nonlinear Dynamics, 57, 2009.

Renno, J., Daqaq M. F., and Inman D. J., “On the Optimal Energy Harvesting from a Vibration Source,” 320 (1-2), Journal of Sound and Vibration,2009.

Alhazza, K., Nayfeh, A. H., and Daqaq, M. F., “On Utilizing Delayed Feedback for Active-Multimode Vibration Control of Cantilever Beams,” Journal of Sound and Vibration, 319 (3-5), 735-752, Jan. 2009.

Daqaq, M. F., Alhazza, K., and Arafat, H., “Nonlinear Vibrations of Cantilever Beams with Feedback Delays,” International Journal of Nonlinear Mechanics, 43, Nov. 2008.

Grujicic, M. B., Pandurangan, W., Bell, C., Daqaq, M. F., Ma, L., Seyr N., Erdmann, M. and Holzleitner, J., “A Computational Analysis and Suitability Assessment of Cold-Gas Spraying of Glass-Fiber Reinforced Poly-Amide 6 for Use in Direct-Adhesion Polymer Metal Hybrid Automotive Components," Applied Surface Science, 254, 2136-2145, 2008.

Mahmoodi, S. N., Jalili, N., and Daqaq, M. F., “Modeling, Nonlinear Dynamics, and Identification of Microcantilever Sensors,” IEEE/ASME Transactions of Mechatronics, 13 (1), 58-65, 2008.

Alhazza, K., Daqaq, M. F., Nayfeh, A. H., and Inman, D. J. “Nonlinear Vibrations of Parametrically-Excited Cantilever Beams Subjected to Nonlinear Delayed-Feedback Control,”International Journal of Nonlinear Mechanics, 43 (8), 2008.

Daqaq, M. F., Abdelrahman, E. M., and Nayfeh, A. H., “Towards a Stable Low-Voltage Torsional Microscanner,” Microsystem Technologies, 14 (6),2008.

Daqaq, M. F., Reddy, K. C., and Nayfeh, A. H., “Input-Shaping Control of Nonlinear MEMS,” Nonlinear Dynamics, 54 (1-2), 2008.

Masoud, Z. N., and Daqaq, M. F., “A Graphical Approach to Input-Shaping Control Design for Container Cranes with Hoist,” IEEE Transactions on Control Systems Technology, 14 (6), 2006.

Daqaq, M. F., and Masoud, Z. N., “Nonlinear Input-Shaping Controller for Quay-Side Container Cranes,” Nonlinear Dynamics,45(1-2), 149-170, 2006.

Daqaq, M. F., and Nayfeh, A. H., “A Virtual Environment for Ship-Mounted Cranes,” International Journal of Modelling & Simulation, 24(4), 2004.

Masoud Z. N., Daqaq, M. F., and Nayfeh, N. H., “Pendulation Reduction of Small Telescopic Cranes,” Journal of Vibration and Control, 10(8), 1167-1179, 2004.

Hader, M. A., Al-Nimr, M. A., and Daqaq, M. F., “Effect of Operating Pressure on The Performance of a Novel Summer Air Conditioning System,” Heat and Mass Transfer, 39 (5-6), 395-400, 2003.

Al-Nimr, M. A., Daqaq, M. F., and Hader, M. A., “Effect of Working Fluids on the Performance of a Novel Summer Air Conditioning System,” International Communications in Heat and Mass Transfer, 28(4), 2001.

Journal Papers Under Review:

Bibo, A., Li, G. and Daqaq, M. F., “Performance Analysis of A Harmonica-Type Micro-Power Generator,” under review, Journal of Intelligent Material Systems and Structures, 2011.

Masana, R. and Daqaq, M. F., “Energy Harvesting in The Super-Harmonic Frequency Region of A Twin-Well Oscillator,” under review, Journal of Applied Physics, 2011.

Daqaq, M. F., “On Intentional Introduction of Stiffness Nonlinearities for Energy Harvesting under White Gaussian Excitations,” under review, Nonlinear Dynamics, 2011. Conference Proceedings:

Reviewed based on an extended-abstract submission.

Bode, D. R., and Daqaq, M. F., “Parametric Amplification in the Context of Vibratory Energy Harvesting,” in Proceedings of the ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems SMASIS 2011, Scottsdale, AZ, SMASIS2011-5030, 2011.

Masana, R.,and Daqaq, M. F., “Exploiting Super-Harmonic Resonances of A Bi-Stable Axially-Loaded Beam For Energy Harvesting under Low-Frequency Excitations,”in Proceedings of the ASME 2011 International Design and Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2011, Washington, DC, DETC2011-47723, 2011.

Masana, R.,and Daqaq, M. F., “Comparing the Performance of A Nonlinear Energy Harvester in Mono- and Bi-Stable Potentials,”in Proceedings of the ASME 2011 International Design and Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2011, Washington, DC, DETC2011-47828, 2011.

Bibo, A.,Li, G., and Daqaq, M. F., “Design Considerations for An Aero-elastic Micro-Power Generator,”in Proceedings of the ASME 2011 International Design and Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2011, Washington, DC, DETC2011-47833, 2011.

Bibo, A.,St. Clair, D., Sennakesavababu, V., Li, G., and Daqaq, M. F., “A Nonlinear Electromechanical Model of A Scalable Self-Excited Wind Energy Harvester,”in Proceedings of the ASME 2009 International Design and Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2010, Montreal, Canada, DETC2010-28921, 2010.

St. Clair D., Stabler C., Daqaq, M. F., Luo J., and Li G.,“A Smart Device for Harnessing Energy from Aerodynamic Flow Fields,” Proceedings of the ASME 2009 International Conference and Exposition, Lake Buena Vista, Fl, IMECE 2009-12301, 2009.

Daqaq, M. F., “New Insight into Energy Harvesting via Axially-Loaded Beams,” in Proceedings of the ASME 2009 International Design and Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2009, San Diego, CA, DETC2009-86974, 2009.

Starling, T., Daqaq, M. F., and Li, G., "Computational Analysis of Input-Shaping Control of Torsional Microelectromechanical Mirrors," Proceedings of the 2009 ASME International Mechanical Engineering Congress and Exposition, IMECE2009-10948, 2009.

Seuaciuc-Osorio, T. and Daqaq, M. F., “Reduced-Order Modeling of Energy Harvesters,” in Proceedings of the ASME 2009 International Design and Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2009, San Diego, CA, DETC2009-87287, 2009.

Daqaq, M. F., and Vogl, G., “Frequency Islands in The Primary Resonance of Nonlinear Delay Systems,” in Proceedings of the 6th EUROMECH Nonlinear Dynamics Conference (ENOC 2008), Saint Petersburg, Russia, 2008.

Mahmoodi, N., Daqaq, M. F., and Jalili, N., “Nonlinear Dynamics of A Piezoelectrically-actuated Microcantilever Sensor,” in Proceedings of the 6th EUROMECH Nonlinear Dynamics Conference (ENOC 2008), Saint Petersburg, Russia, 2008.

Bradley, C., Daqaq, M. F., and Jalili, N., “Experimental Study on Utilizing Delayed Feedback for Ultra-Sensitive Sensing,” in Proceedings of the IMECE 2007, International Mechanical Engineering Conference and Exposition,November 5-10, Seattle, WA, IMECE2007-42513, 2007.

Alhazza, K., Nayfeh, A. H., and Daqaq, M. F., “Delayed-Acceleration Feedback for Active-Multimode Vibration Control of Cantilever Beams,” in Proceedings of the ASME International Design and Engineering Technical Conference, IDETC2007, September 4-7, Las Vegas, NV, DETC2007-34793, 2007.

Daqaq, M. F., Alhazza, K., and Stanton, S., “Effect of Feedback Delays on Nonlinear Vibrations of Cantilever Beams,” in Proceedingsof the ASME International Design and Engineering Technical Conference, IDETC2007, September 4-7, Las Vegas, NV, DETC2007-35085, 2007.

Daqaq, M. F., Bradely, C., Jalili, N., and Alhazza, K., "Feedback Delays for Ultrasensitive Sensing," in Proceedings of the ASME International Design and Engineering Technical Conference, IDETC2007, September 4-7, Las Vegas, NV, DETC2007-35088, 2007.

Renno, J., Daqaq M. F., Farmer, J., and Inman, D. J., “Parameter Optimization of a Vibration-Based Energy Harvester,” in Proceedings of the ASME International Design and Engineering Technical Conference, IDETC2007, September 4-7, Las Vegas, NV, 2007.

Daqaq, M. F., Renno, J., Farmer, J., and Inman, D. J., “Effects of System Parameters and Damping on an Optimal Vibration-Based Energy Harvester,” in Proceedings of the 48th Structures, Structural Dynamics, & Materials (SDM) Conference (AIAA), Honolulu, HI, 7901-7911, 2007.

Daqaq, M. F., Abdelrahman E. M., and Nayfeh, A. H., “Modal Interactions in Resonant Microscanners,” in Proceedings of the IMECE 2006, International Mechanical Engineering Conference and Exposition,November 5-10, Chicago, IL, IMECE2006-13844, 2006.

Daqaq, M. F., and Masoud, Z. N., “A Graphical Phase Plane Approach for Controlling Cargo Transfer on Quay-Side Container Cranes with Hoisting,” in Proceedings of the 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Material Conference, AIAA, Austin, TX, 2005.

Hader, M. A., Al-Nimr, M. A., and Daqaq, M. F., “Effect of Operating Pressure on the Performance of a Novel Air Conditioning System,”in Proceedings of the IASTED International Conference on Power and Energy Systems (EuroPES2001), ISATED, Rhodes, Greece, 2001. Reviewed based on an extended-abstract submission.

Alhazza, K. A., Vogl, G.W., and Daqaq M. F., “Frequency Islands in the Primary Resonance of Nonlinear Delay Systems,” inProceedings of the Thirteenth Conference on Nonlinear Vibrations, Dynamics, and Multibody Systems, Blacksburg, VA, 2010.

Seuaciuc-Osorio T., and Daqaq M. F., “Analytical Analysis of Power Harvesting from Environments with Time-Varying Frequency” in Proceedings of2009 Joint ASCE-ASME-SES Conference on Mechanics and Materials, Blacksburg, VA, June/2009.

Stabler C., Seuaciuc-Osorio T., Qaroush Y., and Daqaq M. F., “Energy Harvesting via Parametric Excitations” in Proceedings of2009 Joint ASCE-ASME-SES Conference on Mechanics and Materials, Blacksburg, VA, June/2009.

Qaroush, Y., Daqaq, M. F., Saeidporazar, R., and Jalili, N., “Feedback Delays for Vibration Mitigation at the Microscale” in Proceedings of the 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, CA, May/2009.

Seuaciuc-Osorio T., and Daqaq M. F., “Parameter Optimization of a Magnetostrictive Vibration-Based Energy Harvester,” in Proceedings of the 15th International Symposium on: Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, v 6928, San Diego, CA, March/2008.

Conference Proceedings: (Unreviewed)

Daqaq, M. F., and Li, G., “Powering Remote Sensors Using Scalable Self-Excited Micro-Power Generators,” in Proceedings of the NSF Engineering Research and Innovation Conference, Atlanta, GA, 2011.

Daqaq, M. F., “Response of Duffing-Type Energy Harvesters to Random Excitations,” Proceedings of the IMAC-XXVIII Conference and Exposition on Structural Dynamics, Jacksonville, FL, 2010.

Daqaq, M. F., Reddy, K. C., and Nayfeh A. H., “Input-Shaping Control of Nonlinear MEMS,” Proceedings of the IMAC-XXII Conference and Exposition on Structural Dynamics, Orlando, FL, 2006.

Daqaq, M. F., Masoud, Z. N., and Nayfeh A. H., “Nonlinear Modeling and Control of Quay-Side Container Cranes,” Proceedings of the IMAC-XXII Conference and Exposition on Structural Dynamics, Orlando, FL, 2005. Conference Proceedings: (Under Review)

Bibo, A., Masana, R., King, A., Li G., and Daqaq, M. F., “Investigating The Energy Harvesting Potential of Ferro-Fluids Sloshing in Base-Excited Containers,” under review, in Proceedings of the 19th SPIE International Symposium on: Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 2012. PRESENTATIONS

Invited:Daqaq, M. F., “Useful Vibrations: The Operation Concept, Latest Advances, and Shortcomings of Vibratory Micro-Power Generators,” Department of Physics, Hamline University, St. Paul, MN, Oct., 2009.

Daqaq, M. F., “Recent Advances in Vibratory Energy Harvesting,” Department of Mechanical Engineering,Kuwait University, Saffat, Kuwait, Dec., 2009.

Daqaq, M. F., “Vibratory Energy Harvesting in Random Environments,” Duke Vibrations Workshop, Duke University, Durham, NC, May, 2010.

Daqaq, M. F., “A Scalable Wind Energy Harvester for Powering Remote Low-Power Consumption Sensors,” National Science Foundation Workshop on Structural Health Monitoring and Control, Amman, Jordan, June 21-23, 2010.

Daqaq, M. F., “Powering Remote Sensors Using A Novel Self-Excited Micro-Power Generator,” ASME Conference on Smart Materials, Adaptive Structures, and Intelligent Systems, Philadelphia, PA, Sept. 28-Oct. 1, 2010.

Regular:Inman, D. J. and Daqaq, M. F., “Effects of Damping on Energy Harvesting,” University of Texas Workshop on Piezoelectric Energy Harvesting, Arlington, Texas, Jan 30-31, 2007.

Bibo, A., Daqaq, M. F., John Wagner, and George Fadel “Energy Harvesting from a Truck’s Leaf Spring,” Automotive Research Conference, Ann Arbor, Michigan, May, 2009.

Stabler, C., Bibo A., John Wagner, George Fadel, and Daqaq, M. F., “The Magnetostrictive Alternator,” Automotive Research Conference, Ann Arbor, Michigan, May, 2009. BOOKS, BOOK CHAPTERS AND MONOGRAPHS

Renno, J.M., Daqaq, M.F., and Inman, D.J., Energy Harvesting Technologies, chapter "On the Optimal Energy Harvesting from a Vibration Source Using a PZT Stack." Springer, 1st edition, December 2008. PATENTS“Self-Excited Piezoelectric Micropower Generators,” USA, Provisional Patent submitted, 61/381,106, with G. Li. HONORS AND AWARDS

CAREER Award, National Science Foundation (2011), Dynamical Systems Program, CMMI.

Kuwait University Research Reward (2011), Award is made based for best paper published with a researcher from Kuwait University. ($3500 shared with co-authors Dr. Khaled Alhazza and Dr. Yousef Qaroush for paper entitled “On Primary Resonances of Weakly Nonlinear Delay Systems,” Nonlinear Dynamics, 2011).

Eugene Bishop Award for Teaching Excellence, PI TAU SIGMA (2011). Award is made based on online voting of all Mechanical Engineering Students.

Eugene Bishop Award for Teaching Excellence, PI TAU SIGMA (2010). Award is made based on online voting of all Mechanical Engineering Students.

© copyright 2008 Mohammed Daqaq all rights reserved

© copyright 2008 Mohammed Daqaq all rights reserved

Contact this candidate