Project Manager
Resume:
RICHARD MORTILLARO
Everett, Ontario L0M 1J0
aboo6v@r.postjobfree.com
CAREER OBJECTIVE
To Utilize and develop acquired career skills in a challenging position
within the Field Service Industry.
SUMMARY OF PROFESSIONAL STRENGTHS
A hard-working, conscientious and self-motivated individual who takes on
new challenges with enthusiasm; extremely strong communication and
interpersonal skills; high level of procedural, mechanical, & electrical
aptitude, to deliver quality assurance and precision products efficiently
and effectively.
DEMONSTRATED COMPETENCIES & EXPERIENCES
> Nuclear Energy Worker valid to 2014
> Refurbishment Scopes at Bruce A, Units 1 & 2: Low Pressure Service Water
(LPSW), Valve Program, Pipe Hanger Program, Trash Racks Lake Water
Intake, Intake Pumps, and Heat Transport Pumps
> Experience in Electrical Scopes, Instrumentation & Controls within the
Main and Secondary Control Rooms, Nuclear
> Safety First Priority, Trained in Lock Out/Tag Out, Fall Protection,
Confined Spaces, Elevated Work Platform, WHMIS & MSDS, Environmental ISO
14001, and Radiation Services Protection Certificate
> Multiple Tasks within Main and Secondary Control Rooms, Bruce A
> High Level of Procedural, Documentation, Mechanical, and Electrical
Aptitude to deliver Quality Assured Modification Maintenance Completion
Certificates (MMCC) efficiently and effectively for Bruce A Nuclear
Restart
> Ensure Equipment Installed on Systems Meets with Drawing, Design, and
Procedural Specification
> Design, Install, Modify & Maintain, Water Treatment Systems for Waterjet
Cutting Applications
> Use Filters, RO, De-Ionizing, De-Oxygenation, UV, Softeners, Diatomaceous
Earth Filtration, Settling Tanks, Centrifugal Separators, Floats, Valves,
Strainers, Meters, Controls, and Timers
> Maintenance and Re-Build of Water Pumps: Ultra High Pressure,
Centrifugal, Jet, Submersible, Effluent, Fluid Injection, Piston, Enteral
Feeding, Diaphragm, and Flexible Impeller
> Flow certified ultra high pressure water pump repair to 67k psi
> Monitor & Trend: Conductivity, Pressures, Fluid Levels, Hardness, PH,
Chlorine
> Trouble Shooting & Diagnosing issues related to Software Settings, PLC,
PC Boards& Components
> Experienced in using Testing, Measuring, and Calibration Equipment,
Analogue & Digital Multimeters, Oscilloscope, Vacuum & Pressure Gauges,
Obd2 Scanner, Resistivity, Flow, Torque & Tension Meters, and Brix Meters
> Revise CAD Data to Correctly Reflect Changes & Modification Made in the
Field to Equipment and Plant Layout
> Improve Maintenance Schedules & Equipment Up Times by Employing
Predictive & Preventative Maintenance
> Supervise, Mentor, and Train Individuals in the Safe Operation and
Maintenance of Machines & Equipment
> Programming, Operation, Maintenance, Repair, & Calibration of Machine
Tools, including CNC Mills, CNC Lathes, Waterjets, Routers, Wire & Sink
EDM, Lasers, Automatic & Manual Machines
> Experience in Automotive Progressive and Hand transfer dies: Die
Development, Strip Layouts, Laser Tryout Strips; CAD Design Update &
Finalization for Customer
> CNC Programs for Punches, Die Sections, Punch Holders, Sub-Plates, Die
Shoes
> Part Prototyping and Reverse Engineering
> CAD/CAM Proficient in multiple softwares
> GD&T, AS9100, ISO9000, QC, QA, EQ, SPC, JIT and 5S of KAIZEN trained
> Read Schematics, Blue Prints, Process Flow Diagrams; Piping, Control and
Instrumentation Drawing
> PC Software, Microsoft Office Suite, Hardware, Firmware, PC Network
Skills, PassPort, Curator, Primavera
> Manufacturing Business Manager and Owner, Servicing the Ontario Medical,
Nuclear, and Automotive Sectors
> Responsible for Company: Business Plan, Projects, Capital Purchases,
Scientific Research & Experimental Development
> Operate Business within the Regulations set out by the Government of
Ontario & Canada, for Health & Safety, Employment Standards Act, and the
Environment
> Schedule Multiple Customer Deliverables and coordinate Machine &
Personnel availability, and Logistics
> Marketing and Sales skills within various Industrial, Commercial, and
Residential Sectors
> Establish Solid Relationships with Staff, Customers and Suppliers
> Quotation, Negotiation, and Administration of Contracts for Purchases,
and Outside Sales & Services
> Member of the Project Management Institute
WORK HISTORY
GE AVIATION (division being sold)
EDM Operations and Setup
Nov 2012 - Dec 2012
Responsibilities:
* Responsible for first off dimensional verification. Collaborate with QC
departments and engineering staff on results from CMM, and advice on
improvements to reduce cycle times and improve quality. GD&T trained, and
crane qualified.
* Manufacture both static and rotating turbine engine components to close
tolerances on various CNC wire, sink, and fast hole EDM. Jet engine
components include: shroud segments, HPT shroud supports and rotating air
seals to combustion cases, bearing housings and vane actuator assemblies
* Repair, Maintenance, and Calibration of Electrical Discharge equipment
GE AVIATION (Term Contract completed Aug 16)
CNC Operations and Setup
Feb 2012 - Aug 2012
Responsibilities:
* Responsible for first off dimensional verification. Collaborate with QC
departments and engineering staff on results from CMM, and advice on
improvements to reduce cycle times and improve quality. GD&T trained, and
crane qualified.
* Manufacture both static and rotating turbine engine components to close
tolerances on various four axis CNC lathes and mills. Jet engine
components include: shroud segments, HPT shroud supports and rotating air
seals to combustion cases, bearing housings and vane actuator assemblies.
* Provide guidance on the resolution technical issues including tool
selection, and geometry
* Repair, Maintenance, and Calibration of CNC Lathes
AMIDYNE GROUP INC.
Technical Writer
June 2011 - July 2011
Responsibilities:
* Short term contract Technical Writer hired to revise and update Training
Packages resulting from the modification of existing, and installation of
new equipment within the Bruce Power nuclear plant as part of the Restart
Project for units 1 and 2
* My scope of work pertained to Air Lock upgrades and EQ upgrades for the
air locks within units 1 & 2 as they pertain to the training needs of
Certified Operators, NLO's, Mechanical Maintenance, Control Maintenance,
and Engineering. Along with Emergent Design Work for maintenance
activities
AMEC NCL (within Bruce Power Nuclear)
RTS Operational Readiness Technician II
Contractor Feb. 2009 - Aug. 2010
Responsibilities:
* Responsible for all forms and documents within DWC Restart Binders
* Support the Valve Program through walkdowns in Bruce A of various
components, verifying PassPort updates, and was responsible for final
sign-off of documents contained in the MMCC binder before submission to
the RDMO
* Nuclear Energy Worker valid to 2014, with experience in various
radioactive areas of Bruce A, Units 1& 2
* Validate the Return to Service (RTS) process of each system is accepted
by PMC, the client, and regulatory bodies
* Understand and apply multiple procedures as required, including
Engineering Change Control (ECC), Available For Restart (AFR), Available
For Service(AFS), and Modification Maintenance Completion Certificate
process (MMCC)
* Participate in Task Analysis Meetings (TAM's) related to multiple
milestones
* Provide up to date data status of multiple milestones in Excel spread
sheet format
* Participate in contractor schedule meeting, providing input for
adjustments to the Primavera P6 scheduling
* Use PassPort, LiveLink and Curator to validate pre-defines, spare parts,
on-line wiring and design manuals for Restart and Bruce Power
* Interface with Bruce Power personnel, SCED's, & contractors (GE, ASLF,
AECL, FOX, CANDU, SLN-AECON), to ensure their needs are met in line with
the project objectives and the MMCC process
* Provide support to RTS lead and team members as necessary
* Work with DWC's to ensure their binders meet the objectives of the MMCC
process
* Attend pre-walk downs and walk downs of DCN's, AFS, and maintenance, of
various systems, including LPSW, SLAR, SCA, ECI, Air Locks, Confinement
Doors, Neutron Flux Monitors, Seal Penetrations and Fire Systems
* Verify with stakeholder all needs of the MMCC process have been fulfilled
within the MMCC binders accurately
* Inspection of components changed in the field, and verify the
corresponding documentation correctly reflects status
* Registered user of Intelex System for Blue Card submissions
* Delivery of daily Non-Conformance Report status to Operational Readiness
Staff
* Assist in Configuration Management
* Set up access for RTS members into the CribMaster system in Bruce A
* Selection, maintenance and inventory of cameras, associated equipment,
and various PPE for staff & visitors
* Acquire granted permissions from Bruce Power Security allowing staff
access of equipment to and from plant
* New modifications I have been involved in have included, Neutron Flux
Monitors, Controls & Instrumentation within the Master Control Room,
Secondary Control Room, and ECR. I was also involved with Lower Pressure
Service Water, Trash Racks, Air Locks & Transfer Chambers and various
fueling aspects including SLAR
* Maintenance Projects included the Valve Program and the Hanger Program
* Responsible for the coordination of several groups of interest including
representatives from Bruce Power's Operations and Maintenance
departments, varied contractors including Siemens, SNC Lavalin, General
Electric, and AECL, and regulatory bodies including the CNSC, ESA, and
the TSSA
* The visual inspections of equipment changed in the field with
stakeholders
* Verification of documentation relating to training, spare parts, and
maintenance cycles, participation in contractor schedule meetings
ensuring my obligations under the Primavera P6 schedule were inline
* Conducting acceptance meetings for stakeholder signoff
* Followed up and resolved any issues that arose during the course of
installation or acceptance ensuring the timely closeout of equipment and
systems to the satisfaction of customer and stakeholders
ADVANTEC WATERJET INC.
Owner/Project Manager/Supervisor/Programmer
April 2000 - Feb. 2009
Responsibilities:
* Co-ordinate with aerospace, automotive and nuclear clients with respect
to applications, and processes in the manufacturing of parts, to
specifications of the associated industries, and ensure all regulatory
documentation completed for each;
* Liaise and co-ordinate with clients, vendors, business owners, employees,
to ensure timely delivery of all products and ensure all documentation
prepared and completed as per business requirements;
* Translation of CAD data from native file formats to applicable machine
formats; along with reading of blueprints and engineered drawings for
architectural and automotive die design;
* Liaise with outside automation company for the updating of pneumatic
automated systems on horizontal mill to PLC based components, to output
for improvements, repeatability and reliability in the cutting of
aluminium impact extrusions;
* Maintenance of all equipment and equipment documentation to ensure health
and safety standards are met and exceeded;
* Arrange/prepare documentation and proposals; for meetings with clientele
to review protocols and establish timelines so that parts may be
processed as required;
PYRAMID TOOL & DIE LTD.
Wire EDM Programmer/Operator/Supervisor
1997 - 2000
Responsibilities:
* Liaison with engineering, design and machining and turning departments in
the modification of progressive die design and revise and update
associated engineered CAD drawings to latest revisions
* Output CNC programs for CNC mills and CNC lathes for the creation of new
components, tools and jigs in accordance with customer specifications
* Co-ordinate with millwrights and engineering department to establish
material selection and setup procedures
* Co-ordinate with quality assurance to take math data resulting from CMM
analysis to CAD mod
Repair, Maintenance, and Calibration Electrical Discharge equipment
CONCORD TOOLING & MANUFACTURING LTD.
Wire EDM Programmer/Operator/CNC Machinist
1995 - 1997
CLOVER TOOL MANUFACTURING LTD.
1993 - 1995
Wire EDM Programmer
CAM TOOL & DIE LTD.
1992 - 1993
Wire EDM Programmer/Operator
CNC OPERATOR & SMALL BUSINESS POSITIONS
1985 - 1991
CAREER DEVELOPMENT
RTS Qualifications: Orange Badge, Confined Spaces, Assembly Area
Supervisor, AMEC Safety Induction, Environmental ISO
14001, WHMIS, Safety Rules, Elevated Work Platform
Certificate, Fall Protection, Escort Red Qualified
Visitors, PARS training, Crane training, Radiation Services
certificate, Primavera P6 training
PMP Certification: Currently working towards PMP Certification, PMP pre-
exam grad
Computer Skills: Excel, Word, PassPort, Curator, Primavera, Corel Draw,
Microsoft Office Suite, Livelink, Intelex, CadKey,
KeyCreator, Cutting Shop, AutoCAD, Solid Works, MasterCam,
FlowMaster, CimCad, EdgeCam
CNC & Manual: Flow A-Series 4800 Waterjet, Various Sodick and Mitsubishi
Wire EDM, 5-Axis Machining,
Ex-Cell-O Machining Centre, Deckel FP3NC Machining Centre,
various manual Mills, Drills, Saws and Lathes, Hardinge
CHNC II Super Precision lathe, Hardinge Super Slant lathe,
AXYZ Routor, HASS CNC mills, Mitsubishi Lasers, Esab
Waterjet, Fagor CNC Lathe, Okuma LU45 Lathe, Okuma LU40
Lathe
EDUCATION
PMP pre-exam grad Project Management Institute
2011
Numerical Control Machining II Seneca College of Applied Arts and
Technology 1988
Computer Assisted Drafting Seneca College of Applied Arts and
Technology 1988
Numerical Control Programmer I Seneca College of Applied Arts and
Technology 1986
Machine Shop Seneca College of Applied Arts and
Technology 1985
Electrical Technician George Brown College
1984
O.S.S.G.D Birchmount Park Collegiate Institute
1983
Contact this candidate