Amir Arsalan Sadeghinia
Senior Naval Architect
Phone: +98-912*******
Email: abofso@r.postjobfree.com
Summary of Qualifications
1. Over 8 years of experience in ship design
2. Expert in mechanical and piping system design for merchant and supply ships
3. Expert in ship structural design, stability, HVAC, outfitting, safety design
4. Good knowledge of quality control process and developing QC plans and procedures
5. Good knowledge of construction planning and project control
6. Good knowledge of Single Point Mooring (SPM) structural and mechanical design
7. Good knowledge and experience in different type of dredgers design
8. Good knowledge in under water pipe laying design, construction and commissioning
9. Good knowledge in mooring system design
10. Good knowledge in marine rules and regulation, especially: KR, BV, DNV
11. Good knowledge in process pipe line standard (ASME B31.3)
12. Good knowledge in pneumatic and hydraulic system design using Automation pro
13. Experience in ship and other marine structure engineering and construction projects
14. Strong interpersonal and communication skills,
15. Eager in mastering new skills through hands-on experience.
Trainings and Certificates
Institute
1. Welding inspection - Ultrasonic Method (Level II)
2. Welding inspection - Magnetic Particle Method (Level II)
3. Welding inspection - Penetrate Liquid (Level II)
4. Welding inspection - Radiography Film Interpretation (Level II)
Iranian Welding research and engineering center (IWREC)
1. Paint Inspection
Iranian Corrosion Association
1. Shipyard and shipbuilding survey and classification society roles in marine industry
2. Management of Utilizing of the Rules & Regulations Classification in Marine Industries & Maritime Affairs
Iranian Classification Society
1. Pipenet Software
2. Carrier Software
3. Caesar II Software
4. HVAC System Design
5. Fire Fighting System Design
6. Claim Management (According to Iranian Internal Rules & FIDIC)
7. EPC Contract Cost Control
Novin Parsian Institute
1. Pressure Vessel Design (PV Elite Software)
Pardad Petro Danesh Company
1. Pneumatic and Hydraulic system design
Sharif University of Technology
1. EPC Projects Engineering Management,
Aryana Institute
Work Experiences
Iranian Classification Society ( ICS) (June 2011 – now)
Senior Surveyor - Ship Piping, Outfitting and Mechanical Systems
Responsibilities:
Mechanical and piping systems, outfitting, safety and stability plan approval for all types of merchant and supply Vessels. The projects included ships less than 500 GT, ships above 500 GT, high-speed and light craft, FRP vessels. Some of these projects are listed below:
1. 35000 tons product carrier
2. 15000 tons oil tanker barge
3. 24000 tons heavy lift multi-purpose vessel
4. 98 persons accommodation barge
5. 70m Ro-Ro Passenger ship piping
6. Fishery Research ship
7. 60m platform supply vessel
8. 16000 HP multi-purpose supply vessel (MPSV) (Caspian Class)
9. 16m cutter suction dredger
10. Fiber Glass fast attack boat
11. Aluminum fast attack boat
12. 47 m warship
Some of the projects I have completed on a freelance basis are as listed below. My responsibilities included, Vessel Hull Structure, Outfitting, Piping, machinery and safety design
1. 400S Cutter Suction Dredger for Gostaresh Karaneh, Steel Ship (Dredger), Lwl=16m, ICS/KR Class
2. 16m composite marine ambulance for Darya Tajhiz Arya, High speed Composite Ship, Lwl=16.25m, ICS/KR Class
PETRO PART - Oil, Gas, Petrochemical& Power Plants Projects (Mar. 2009 – Jan. 2011)
Piping and process equipment field engineer
Project: Pars Oil and Gas Company (POGC);
Iran South Pars Gas Field Development Phases 15 & 16
Responsibilities:
1. Coordinating piping field engineering (above and underground piping systems)
2. Coordination of process equipment installation engineering activities
3. Heavy lifting process design and engineering
4. Piping and equipment installation work estimating
5. Preparing engineering documents for construction
6. Arranging and participating in different coordination meeting with project share holders
7. Review of project specification for related tasks
8. Interface coordination with other engineering disciplines
9. Providing WPS, Weld Map and NDT Map of piping systems
10. Managing the construction subcontractors, contracts control, cost invoice control and actual activity work front
Nur Fanavari Novin Co. (Nov. 2008 – Mar. 2009)
Technical Manager
Responsible for all design aspects including Hull, Stability, Outfitting, Machinery selection, Shop design drawings
Project: 1200 DWT landing craft
Steel Ship, Lpp:50m, BV Class
Initially a deck cargo ship; at a later stage as per client wish converted to an oil carrier class (flash point<60)
Responsibilities:
1. Perform the initial and conceptual engineering
2. Preparation of GA
3. Body line modification using the Mechanical desktop package and Auto Power software
4. Ship structural design coordination
5. Ship intact stability control coordination (parallel to ship structural design)
6. Ship outfitting design coordination
7. Ship piping, machinery and deck machinery design
8. Ship safety and fire control plan design according to the SOLAS and Iran internal safety concepts
9. Ship electrical and navigation systems design coordination
10. Ship accommodation internal design coordination
11. Providing WPS, Weld Map, NDT Map
12. Revising G.A to suite the tanker characteristics and requirements
13. Ship intact stability re-control and damage stability control coordination
14. Ship electrical systems redesign coordination
15. Preform all of the modification in ship piping system design and design an efficient cargo piping and deck firefighting systems for the ship according to the related codes
Project: 2000 HP Anchor Handling Tug boat
Steel Ship, Lpp=26m, ICS/KR Class
Responsibilities:
1. Perform the initial and conceptual engineering
2. Preparation of GA
3. Body line modification using the Mechanical desktop package and Auto Power software
4. Ship structural design coordination
5. Ship intact stability control coordination
6. Ship outfitting design coordination
7. Ship piping, machinery and deck machinery design
8. Ship safety and fire control plan design
9. Ship accommodation internal design coordination
10. Providing WPS, Weld Map, NDT Map
Project: 47 persons Crow boat
Aluminum high speed craft, ICS/KR Class
1. Perform the initial and conceptual engineering
2. Preparation of GA
3. Body line modification using the Mechanical desktop package
4. Ship structural design coordination
5. Ship intact stability control coordination
6. Ship outfitting design coordination
7. Ship piping, machinery and deck machinery design
8. Ship safety and fire control plan design according to the SOLAS and Iran internal safety concepts for passenger crafts
9. Ship electrical and navigation systems design coordination
10. Ship accommodation internal design coordination
Sadra Omid e Chabahar (Nov. 2007 – Nov. 2008)
QA/QC Manager
Project: 1400 Tons Landing Craft
Steel Ship, Lpp=64, BV Class
Responsibilities:
1. Preparation of Standard project ITP forms according to the project scope of work
2. Steel Structure total ITP (Cutting, Preassembly, Installation, Painting)
3. Machinery installation ITP
4. Piping construction and Installation ITP
5. Electrical and navigation equipment installation ITP
6. Commissioning ITP
7. Standard supervising check lists preparation
8. Standard related procedures preparation (as construction and quality control yard standard)
9. Sea Trial procedure and check lists preparation
10. Inspection groups coordination
11. Lunching procedure and execution statement control and modify according to the yard and vessel condition
12. Coordination of NDT Process
13. Perform welder tests in any welding positions
14. Evaluating the Subcontractor qualification
15. Subcontractor invoices control (according to related records)
16. Daily routine inspections
17. Coordinating between the client, project engineering group, project execution group and Class
Project: 1500 Tons Landing Craft
Steel Ship, Lpp=71m, BV Class
Responsibilities:
1. Preparation of Standard project ITP forms according to the project scope of work
2. Steel Structure total ITP (Cutting, Preassembly, Installation, Painting)
3. Machinery installation ITP
4. Piping construction and Installation ITP
5. Electrical and navigation equipment installation ITP
6. Commissioning ITP
7. Standard supervising check lists preparation
8. Sea Trial procedure and check lists preparation
9. Inspection groups coordination
10. Coordination of NDT Process
11. Perform welder tests in any welding positions
12. Lunching procedure and execution statement control and modify according to the yard and vessel condition
13. Evaluating the Subcontractor qualification
14. Subcontractor invoices control (according to related records)
15. Daily routine inspections
16. Coordinating between the client, project engineering group, project execution group and Class
Project: 2000 tons Deck Cargo Barge
Steel Ship, Lpp=52, ICS/KR
Responsibilities:
1. Preparation of Standard project ITP forms according to the project scope of work
2. Steel Structure total ITP (including all the related activities: Cutting, Preassembly, Installation, Painting)
3. Machinery installation ITP
4. Piping construction and Installation ITP
5. Electrical and navigation equipment installation ITP
6. Commissioning ITP
7. Standard supervising check lists preparation
8. Coordination of NDT Process
9. Perform welder tests in any welding positions
10. Sea Trial procedure and check lists preparation
11. Inspection groups coordination
12. Lunching procedure and execution statement control and modify according to the yard and vessel condition
13. Evaluating the Subcontractor qualification
14. Subcontractor invoices control (according to related records)
15. Daily routine inspections
16. Coordinating between the client, project engineering group, project execution group and Class
Sadra Omid e Chabahar (Aug. 2005 – Nov. 2007)
Technical Manager – Naval Architect
Project: 500S Cutter Suction Dredger, Iranian Offshore Engineering and Construction Co. (IOEC)
Steel Ship, Lwl=37, BV Class
Responsibilities:
1. Project hull structure and outfitting shop drawings preparation
2. Project production Engineering and preparation the related drawings
3. Project physical progress control
4. Providing WPS, Weld Map, NDT Map
5. Subcontractors invoices and claims investigation
Project: 1400 Tons Landing Craft
Steel Ship, Lpp=64m, BV Class
Responsibilities:
1. Project Documents managing
2. Project hull, structural outfitting, Piping, Electrical structure shop drawing and MTO preparation coordination
3. Providing WPS, Weld Map, NDT Map
4. Project production engineering
5. Technical office standard procedures preparation
6. Arranging and participating in different project meetings with client, project engineering group, project execution group and also classification class.
7. Subcontractors invoices and claims investigation
Project: 1500 Tons Landing Craft
Steel Ship, Lpp=71m, BV Class
Responsibilities:
1. Perform the initial and conceptual engineering of the project until G.A preparation
2. Ship structural basic design coordination
3. Ship intact and damage stability control coordination
4. Ship outfitting basic design coordination
5. Ship piping, machinery and deck machinery basic design
6. Ship safety and fire control plan design
7. Ship accommodation internal design coordination
8. Project Documents managing
9. Project hull, structural outfitting, Piping, Electrical structure shop drawing and MTO preparation coordination
10. Providing WPS, Weld Map, NDT Map
11. Project production engineering
12. Technical office standard procedures preparation
13. Arranging and participating in different project meetings with client, project engineering group, project execution group and also classification class.
14. Subcontractors invoices and claims investigation
Project: 2000 tons Deck Cargo Barge
Steel Ship, Lpp=52m, ICS/KR
Responsibilities:
1. Perform the initial and conceptual engineering of the project until G.A preparation
2. Project structural basic design coordination
3. Vessel intact and damage stability control coordination
4. Project outfitting basic design coordination
5. Project piping, machinery and deck machinery basic design
6. Project Documents managing
7. Project hull, structural outfitting, Piping, Electrical structure shop drawing and MTO preparation coordination
8. Providing WPS, Weld Map, NDT Map
9. Project production engineering
10. Technical office standard procedures preparation
11. Arranging and participating in different project meetings with client, project engineering group, project execution group and also classification class.
12. Subcontractors invoices and claims investigation
ISOICo. – Bandar Abbas (Jul. 2004 – Aug. 2005)
Technical Staff – Naval Architect
Project: 1200 DWT Landing Craft
Steel Ship, Lpp<90m, BV
Responsibilities:
1. Project Documents managing
2. Project hull, structural outfitting shop drawing and MTO preparation
3. Project material Estimation and MTO preparation
4. Project piping systems ISO-Drawing Checking
5. Project Piping MTO Preparation
Project: 35000 tons Product Carrier, NOIC
Steel Ship, Lpp<90m, BV
Responsibilities:
1. Project Hull Structure Material Estimation and MTO preparation
2. Project Structural outfitting material estimation and MTO preparation
3. Project Element nesting drawings preparation
Educations
M.Sc. in Naval architecture, Amirkabir University of technology (Tehran Polytechnic), (2005-2008)
B.Sc. in Naval architecture, Amirkabir University of technology (Tehran Polytechnic), (2000-2005)
Computer Skills
Microsoft Project MSP 2007
Ansys 8 (Simple Structural & Thermal Analysis)
AUTOCAD – ability to 2D modeling & Drafting
Model Maker, AUTO HYDRO
Maxsurf (Maxsurfpro, Hydromax, Hullspeed)
Pipenet (Standard, Sprinkler Module)
Caesar II (Static & Temperature Loads)
PV Elite (Pressure Vessel Design)
Carrier
Automation Pro
Personal details
Gender: Male
Passport No.: U2594243
DOB: 10/09/1982 – Esfahan
Nationality: Iran
Marital status: Married
Validity: 03/01/2013 (or sooner – negotiable)