Quality Control Plant
Resume:
A lan W Jordan
M aud, Texas 75567
United States
Home: (903) – 306-8976
Work: (903) - 334-2564
WORK EXPERIENCE:
Red River Army Depot 6/2008 - Present
Supply Tech/ Tool & Parts Attendant
I identify user’s tools, parts, equipment, and requirements and requisitions stock as needed.
I set up and maintain storage locations. I utilize a variety of different tools and equipment.
I p repare periodic inventory and determine the basic for over, short, or misplaced i tems by
checking such references as out-for-repair, issue, and tu rn-in records maintained in the
tools and parts room. I ensure that tools and equipment are maintained in good condition
by performing visual and operating checks, taking measurements with such devices as
calipers, and receiving reports from users on the nature and extent of damage to tools and
equipment. Determine stock replenishment levels for centrally controlled supplies and other
material within funding limitations.
Receive a wide variety of supplies and specialized i tems requiring special handling.
I have the proper knowledge of determining when a tool or piece of equipment needs to be
sent for testing or be repaired. I have the ability to operate computer equipment to
accomplish my duties as a tool and parts attendant. I have the knowledge to do research as
m ight be required and the ability to use references such as supply manuals and commercial
catalogs. I have the proper knowledge and experience in driving a fork lift with a 15,000
pound capacity. I have the proper knowledge and skills in working under extreme weather
conditions such as the heat and/or cold and being safe.
I was Leader of the tool room MRAP program in charge of shipping all tools and materials
to specified locations in I raq, Kuwait and Afghanistan. Use the ATICTS system on a daily
basis to issue or return tools from various employees, and also to inventory the various tool
and parts ret rievers and shelves in the tool room. Determine whether stock should be
t urned in, or sent to DRMO for disposal. Ut ilize procedures, guides, and material to
build/rebuild t ransactions. I successfully completed t raining for (WAWF) Wide Area
Workflow, and the (COR) Contract Officer Representative. I have a current class A CDL
w ith hazmat, tanker, double/triple t railer endorsements.
Lear Siegler Inc. / RRAD
Texarkana, TX
Supply Technician/Tool and Parts Attendant
05/2007 - 06/2008
Performed duties as a WG-06 Supply Technician. I am responsible for coordinating with
the installation supply activity and private contractors. I am responsible for maintaining
the storage of MRAP parts, tools and supplies being shipped, also packing of boxes
to be shipped to various MRAP sites overseas. I properly run daily checks of vehicles
and required equipment, prior to use. I conductively t rack what parts or tools were
short on previous shipments made. I maintain a log of the shipments that have been
made as to know what has or has not been shipped. I have the knowledge of knowing
the tools and supplies and there proper use. Daily I issue and do the receiving of
tools and restocking of supplies and tools.
L ivingston T rucking
Texarkana, TX
Dr iver
11/04 - 5/07
Transport empty t railer from River Valley Plant to various Tyson Plant locations
and return loaded t railer from Tyson Plant to River Valley Plant. Occasionally
needed to pull a tank of fat or a hopper bottom t railer, when over the road drivers need
help. I performed a wide range of duties associated with the receipt, storage, and issue of
various classes of supplies and equipment. I ensured proper establishment and
maintenance of accountability during the receipt, storage, and issue of i t. I ensured that
safety procedures are observed at all times, wore protective clothing and used protective
equipment as prescribed in standard operating procedures. I received and processed
i ncoming shipments. I verified i tem against receipt documents to ensure that
proper i tem is being received, i.e., proper description, stock number, quanti ty, etc. I
Reported damages, shortages and overage: in shipments to supervisor immediately
upon detection. I ensured the proper preparation and safeguarding of accountable
records to compile the needed reports on a monthly basis. I established or determined
s torage location, moves i tems to location, performs inventories as prescribed or required. I
Operated 2,000 to 6,000 pound forklift in the performance of warehousing functions.
Required to operate up to 15,000 pound capacity forklift and vehicles
(trucks) from 1 1/2 to 5 ton with a Gross Vehicle Weight (GVW) of 33,000 pounds or
more. I understand and performed proper Preventive Maintenance Checks and Services,
(PMCS) on the 350, 600, 1250 GPM t ransfer pumps, and the 800 GPM mainline pumps.
I have the ability to maintain and operate the pumps. I have a good working knowledge
of the Inland Petroleum Distribution System, (IPDS) to include dispatching procedures,
fill and testing of the pipeline, scraper operations, construction of pipeline, terminals,
and pump stations and emergency repair procedures. I adhere to a strict quality control
program by correctly identifying and storing all petroleum products to include waste
oil. I am HAZ-MAT t rained in proper receipt, storage, and disposal of hazardous materials.
I Draw samples from storage tanks of fuel to be submit ted to the laboratory for analysis.
I periodically submit samples of packaged lubricants to laboratory reports. I maintain
minimum water bottoms in storage tanks by gauging tanks daily or as required by
established
procedures. I police storage areas daily and keeps buildings, equipment, and tools
clean. I controlled vegetation growth in the storage areas. I report when maintenance
of fences, signs, etc. is necessary. I conducted physical inventories of all fuels,
oils, and related products by measuring with gage stick and or tape and bob method.
I assisted in liaison visits to other POL sites to perform inspection of tanks for
acceptable standards, etc.1 e.g., proper marking danger signs fuel t rucks, etc. I
made an informal or formal report to appropriate individual of deficiencies etc.,
found and corrections needed. I received and t ransferred petroleum products from
commercial
tank t rucks, pipeline, hose line to storage tank. I checked receiving documents on
incoming shipments for proper identification of fuel and destination of shipment,
identifies and checks seals, gages, tanks for amount of fuel and water content, takes
and observes fuel samples from each compartment of tank to determine the grade of
fuel and sediment content of fuel. I selected the correct storage tank that connects
tank t ruck to fill line by means of a hose. I selected and opened valves so that
fuel shipment can be pumped or drained into the storage tank. I prepared empty tank t ruck
for release by checking compartments for emptiness closing all valves and removing the
d rain hose. I completed and signed fuel receipt checklist. I delivered bulk fuel
as required utilizing and operating fuel tanker t ruck with a Gross Vehicle Weight
(GVW) of 33,000 pounds or more, pipeline, hose lines.
Sysco Foods
Hope, AR
Route Delivery Driver
8/06 - 10/06
Delivery of grocery and nonperishable food i tems to merchants. Inventoried merchandise
on t rucks and at each delivery stop, to verify correct i tems were being delivered.
Daily safety inspection of t ractor and t railer before start ing route.
Quality / Performance Food Group
Texarkana, AR
Route Delivery Driver
5/06 - 8/06
Delivered grocery and nonperishable i tems to specified merchants, and local, state,
and federal institutions on a daily basis. Inventoried i tems on t ruck to make sure
invoices matched, with inventory on t ruck. Daily deposited payments received during
the route. On occasion pulled a set of double t railers, to the main office in Li t t le
Rock, once there inventoried pallets and returned i tems to be checked in with receiving.
Daily safety inspection of t ractor and t railer prior to use.
Domtar Industries
Ashdown, AR
Production
1/04 - 5/06
Operation of dump t ruck, front-end loader, farm t ractor and bush hog. Use of forklift
to load / unload, palletize and stock warehouse, t rucks and work areas. Use of tug
t ruck to move core buggies to / from core room. Fill in on the front / back of will
sheeters, as needed. Daily forklift inspection at the beginning of each shift and
re-fueling forklift at the end of each shift. Clean up as needed inside the converting
department. Responsible for making sure that all supplies for the paper machine were
in the proper place. I inventoried monthly supplies for roll wrappers and paper machines.
Forklift and tug t ruck certification, along with yearly updates. Forklift safety-t raining
Certification
Quality / Performance Food Group
Texarkana, AR
Route Delivery Driver
5/03 - 1/04
Delivered grocery and nonperishable i tems to specified merchants, and local, state,
and federal institutions on a daily basis. Inventoried i tems on t ruck to make sure
invoices matched, with inventory on t ruck. Daily deposited payments received during
the route. On occasion pulled a set of double t railers, to the main office in Li t t le
Rock, once there inventoried pallets and returned i tems to be checked in with receiving.
Daily inspected t ractor and t railer prior to use.
Kellogg Brown & Root
Houston, TX
Warehouseman / Tool Room
6/98 - 4/03
Performed supply management, such as storage, inventory and cataloging. Operated
forklift, extended forklift and pallet jack to load / unload, palletize and stock
materials. Responsible for inventory management of supplies and equipment kept in
the warehouse and throughout the jobsite. Responsible for distribution and / or
redistribution
of material, supplies and equipment used. Working with vendors on purchasing of material
and / or equipment. .
Blue Bell Creameries
Montgomery, AL
Route Supervisor
2/95 - 6/98
Supervised delivery of ice cream products to schools, retail stores, Federal Institutions,
Commissaries & brokers. Responsible for r iding along with delivery drivers to evaluate
their work, professionalism & to offer positive reinforcement. Involved with checking
in drivers at the end of the day to balance currency, invoices & inventory. Also,
involved in daily ordering of product to be loaded onto t ruck for the next days
routes. Be up to breast on the weekly store newspaper advertisements, to know if
more products needed to be ordered & loaded on each t ruck for delivery. If a t ruck
ran out of product, I was required to load another t ruck with product & meet up with
the driver to continue deliveries. Responsible for merchandising, advertising, and
selling products to new customers. Set up display counters in stores when given extra
space during a scheduled advertisement. Did monthly inventory of t rucks & sales to
make sure we balanced with the company. Also, did monthly cleaning & defrosting of
each t ruck.
SCHOOL / COLLEGE EXPERIENCE:
Texas High School
Texarkana, TX
Graduated 1988
Courses taken: all required courses, & electronics
Texarkana College
Texarkana, TX
1988 - 1990
Courses taken: all required courses & electronics
Lee College
Baytown, TX
2001
Courses taken: basic safety, welding, construction math, & metal cutting
REFERENCES AVAI LABLE UPON REQUEST
EDUCATION:
H igh School
Texas Senior H igh (08/25/1984 - 06/01/1988)
Texarkana, Texas
United States
Degree: H.S. Diploma
A DDIT IONAL I NFORMATION:
I have had various t raining courses, such as back safety, hand safety, and heat awareness.
Have a current class A CDL drivers licenses with double / t r iple & tank endorsements
and Haz-Mat Endorsement.
Forklift and tug t ruck certification, along with yearly updates. Forklift safety-t raining
certification.
Contact this candidate