ROXANNE ANDRIAN
LANSDALE, PA 19446
phone: 215-***-****
cellular: 215-***-****
e-mail: abnml2@r.postjobfree.com
Efficient quality manager with more than 10 years experience; quality internal auditor of quality
systems, ISO 9001: 2000 and AS9100B; a detailed and experienced mechanical engineer and
quality professional with 20 years of design and manufacturing experience.
MANAGER EXPERIENCE
- Quality Director of manufacturing company for the medical and aerospace industries –
machined components and small assemblies; lead auditor, training coordinator, engineering
configuration manager; responsible for planning, inspection and documentation control.
- Quality Manager of an aerospace supplier company - our customers were Boeing, Lockheed
Martin, BAE Systems, AAR, Raytheon, Rockwell Collins. I was the Government
representative for the company, and we were supplying actuators and instrumentation to the
Department of Defense. The DoD forms to submit inspection records, shipping records, were
controlled by my department, the Quality Department. FAA, C.A.S.E. and
Government/customer audits were my responsibility as Lead Auditor.
- Coordinated the development of the Training Program, the Management Review, Internal
Audit Program, continual improvement program, corrective and preventive action for
suppliers, customers and internal processes, the writing and issuance of all the documentation,
implementation of new processes; certified the company to the ISO 9001:2000 standard and
AS9100B.
- Developed and managed a viable Quality Management System, during the past 10 years, and
certified the division of a medium-sized public corporation to the AS9100B and ISO
9001:2000.
- Facilitated training to the quality standard, to common quality practices, in understanding the
quality system, the interaction of the processes, and the value of team work.
- Head of the quality department in a medium-sized plants, over 13 employees including
inspectors, technicians, associate engineers.
- Managed and participated in service, repair and modification activities of passenger
locomotives Amtrak and Metro-North.
- Participated in customer meetings for solving reliability and warranty complaints, safety
FMEA, warranty contract negotiations, reliability issues, during the positions held in the past
10 years;
- Conducted research project for the diagnostic of machine-tool precision using touch probe
technology and original artifacts, under a grant of University of Montreal and Pratt & Whitney
Canada, which was finalized with several student projects, master theses and my Ph.D. thesis.
- Supervised operators for the assembly lines of milling CNC machine-tool cells and automatic
lines.
ENGINEERING EXPERIENCE
- Accomplished manufacturing engineering functions and activities to sustain the Quality
Management System of the company -- audited, wrote, reviewed, facilitated approval, trained
personnel and implemented numerous work instructions and procedures.
- Designed subassemblies and assemblies of machine-tools and industrial robots that have been
effectively built and function in production lines in several European factories.
- Designed and implemented system of milling CNC machine for calibration and precision
diagnostic at University of Montreal, Canada and at Pratt & Whitney Canada, consisting of
several touch probe artifacts and Matlab software (mathworks) for direct machine control.
- Designed and implemented mechanical packaging solutions for freight national locomotive
power electronic equipment, e.g. rectifiers, inverters, locomotive control.
- Designed safety device for throttle locomotive control and won 1998 Top Reliability Project
at General Electric.
- Designed and implemented a combined rectifier for freight locomotive inverter cabin that
brought savings to the company (GE) of more than $250,000 in the first year of its
implementation 1999.
- Participated in a team for the development of technical and contractual documentation of
wireless network development.
- Participated in conducting studies of research activities of Canadian companies and prepared
the required documentation in the scope of making them eligible for federal and provincial
subsidies and tax exemption.
- Conducted more than 20 six sigma engineering projects in the position of project leader or
project mentor, on a extensive range of mechanical engineering reliability or productivity
solutions for locomotive equipment. I obtained the Green Belt certificate and held Black Belt
position.
- Conducted tests for environmental compliance, including 3-axis vibration, simulated vibration
and load, cycling temperature stress, high air pressure in air tunnel, design FMEA,
development of safety and risk analysis.
WORK HISTORY
10/2008 –present – Quality Director, Mitchell Industries – 2 companies MedCraft, and Hi-
Tech Manufacturing (CFS Manufacturing), Mount Laurel, NJ: certified the company to
AS9100B and ISO 9001:2000, Lead Auditor; coordinated planning and compliance with medical
device industry for engineering, quality and production requirements, GMP and ISO 13485;
supervised 12 employees.
09/2005 – 10/2008 – Quality Manager, Moog Components Group, Springfield PA. Principal
responsibilities: certified company to AS9100B and ISO 9001:2000, IPC A-610 trainer, Lead
auditor, Government property administrator, head of the Quality Department (13 employees);
passed FAA, CASE audits; government contract reviewer and government asset contract
administrator.
01/2001 - 08/2005 -- Quality Assurance Manager, Penn Engineering and Manufacturing corp.,
Harleysville PA. Principal responsibilities: Head of the department (11 employees). Coordinated
activities for successful certification to the ISO 9001:2000. Managed monthly and weekly inter-
departmental meetings for the improvement of the manufacturing yield. Supervised activities of
inspection, repair and returned motors, calibration and production non-conformances.
01/1998 - 01/2001 -- Black Belt, Program Manager, General Electric Transportation Systems,
Erie PA. Principal responsibilities: Lead BB engineer in the design of mechanical packaging for
power electronic equipment for inverter and control of locomotives. Lead and mentored six sigma
projects. Managed and participated in service activities for passenger locomotives.
05/1993 - 03/1998 -- Owner of R. Andrian-consultant, Montreal, Canada. Principal
responsibilities: Participated in programs for the development of wireless communication
networks in international applications. Taught industrial design and high-school math in a social
assistance program; Research Assistant, University of Montreal, Canada. Principal
responsibilities: Conducted research in machine-tool precision, kinematics, metrology. Conducted
undergraduate student activities of the metrology laboratory.
09/1991 - 04/1992 -- Program Coordinator, Soros Foundation for an Open Society, Bucharest,
Romania. Principal responsibilities: Coordinated activities and financial support for the promotion
and development of democratic values in the Romanian society.
03/1984 - 09/1991 -- Design Engineer, Research Institute of Machine-Tools, Bucharest, Romania.
Principal responsibilities: Designed various assemblies for vertical and horizontal milling CNC
machine centers. Manufacturing Engineer: Supervised work on the assembly line, planned and
scheduled production activities.
EDUCATION
05/2001 -- Ph.D., University of Montreal, Canada, Ecole Polytechnique, Mechanical Engineering
department.
02/2001 -- 4-degree course of Financial and Accounting Management, Penn State University
07/1992 -- D.E.A. (equivalent to M.S.), University Paul Sabatier and INSA of Toulouse, France,
Mechanical Engineering department.
06/1984 -- Engineer Diploma of 5 1/2 years of college, Polytechnic Institute of Bucharest,
Machine-Tools and Industrial Robots department.
AWARDS AND PUBLICATIONS
03/2007 – Quality System Audit-Tool for Continuous Improvement, article published in
ASQ Newsletter for the Philadelphia section
08/2003 -- Quasi-static kinematic errors of multi-axes machine-tools, Ph.D. Thesis, 2001,
University of Montreal, Canada
02/2000 -- Engineer of the Year, ASME Erie section.
11/1999 -- Outstanding ASME member of the year, ASME.
09/1999 -- Artifact Probing for Machine Tool and Process Geometric Diagnosis UTECA 99, East
Hartford CT.
05/1999 -- GETS productivity project Combined Rectifier.
11/1998 -- Top Reliability Project, General Electric Transportation Systems.
10/1998 -- Machine Tool Capability Diagnostic by Touch Probing, in Symposium of
Manufacturing, Automation and Robotics CSME 98, Ontario, CA.
08/1997 -- Performance Verification and Monitoring of NC Machine-Tools, in Proceeding of the
32nd International Matador Conference, Manchester, UK.
09/1988 -- International Patent 102239, Romania, France, USA, Device for tool transport.
09/1987 -- International Patent 96989, Romania, France, USA, Tool magazine.
10/1986 -- International Patent 94433, Romania, France, USA, Device for tool holders.
INSTRUCTIONAL EXPERIENCE
04-08/2008 – IPC A-610 Certification of soldering 25 operators
03/2003 -- Electrostatic Discharge awareness program, for DC motor assemblers.
07/1999 -- Conference “Encourage Female Students to Practice Engineering”.
03/1999 - 12/2000 -- Statistical and Six Sigma concepts, Demand Flow Technology.
10/1998 - 05/1999 -- mentorship of math grade 6 middle school, weekly.
10/1997 - 12/1997 -- industrial design and high school math.
10/1996 - 03/1997 -- metrology lab and student project supervision.
MEMBER AND AFFILIATION
Certified Quality Manager ASQ since 03/2003.
Professional Engineer registered with the Canadian Council, Order of Engineers of Quebec since
1996.
Member of ASME, SME, SAE, ASQ.