Senior *D PDS Piping Designer

ENGINEERING TRAINING

Piping Design - I, II, III (Taught by Bill Corwin)

MicroStation

ITT Grinnel Fluid Handling and Design Seminar

3D AutoCAD MEP

3D PDS Piping, Equipment, & Isogen

SmartPlant Design Review

Basic Scope Writing Class

Radiological Worker Training 1&2 (Savannah River Site)

SUMMARY

Mr. Manley has over 32 years of design and drafting experience in process

piping for various industries. Throughout his career he has work for just

four employers: Fluor, Savannah River Site, Ch2mHill/Lockwood Greene and

Reynolds, Smith & Hills, During employment at each, he was assigned to

various projects as a 2D and 3D Designer and performed walk downs in the

field. He is proficient in the use of MicroStation, and has also used 3D

PDS for approximately 17 years (34,000 hours). He is skilled in the

checking of orthographic and isometric drawings and is also familiar with

SmartPlant Review Station for checking and reviewing 3D projects.

EMPLOYMENT HISTORY

2011 To Present

Ch2mHill/Lockwood Greene

Spartanburg, SC

Listed below is the project Mr. Manley is assigned to during this timeframe

Lead Designer Intel Corp.

Ch2mHill/Lockwood Greene Hillsboro Plant

2011 to Present Portland, Oregon, United States

Working for Intel Corp. doing 3D Piping & Equipment Design.

2010

Savannah River Site

Aiken, SC

Listed below are the projects Mr. Manley was assigned to during this

timeframe

Lead PDS Designer Savannah River Site

SRS Savannah River Remediation

2010 Aiken, S.C. United States

Working for Savannah River Remediation in the Tank Farm area doing Piping

Design using 3D PDS.

2006 - 2009

FLUOR

Greenville, SC

Listed below are the projects Mr. Manley was assigned to during this 3 year

timeframe

Lead PDS Designer USEC Inc.

Fluor American Centrifuge Plant (ACP)

3/2009 - 12/2010 Piketon, Ohio, United States

Fluor has led engineering, procurement, and construction of the uranium

enrichment facility, which incorporates next-generation technology that is

more efficient than high-cost, high-volume gaseous diffusion technology.

Currently under construction, the facility will produce 3.8MM SWU uranium-

enriched fuel for the nuclear power industry annually.

Responsible for checking systems inside the process building using PDS for

construction

Lead PDS Designer Bristol-Myers Squibb

Fluor LSCC

2007 - 2008 Devens, Massachusetts, United States

Responsible for equipment and piping design for a process tank farm and

biowaste inactivation pit. Using PDS and issuing isometrics for

construction. Generation of 2D Microstation drawings.

Lead PDS Designer/Area Lead Hexcel

Fluor Carbon Fiber Manufacturing Facility

2007 - 2008 Expansion - PAN Line E

Decatur, Alabama, United States

Fluor provided EPC services for Hexcel's new PolyAcrylonitrile (PAN)

manufacturing line, which was a precursor to the production of carbon fiber

used in various industries including; aeronautics, energy, and athletic

equipment.

Responsible for all the process piping in the dope dissolver tower using

PDS and issuing isometrics for construction. Generation of 2D Microstation

drawings.

.

Lead PDS Designer Amgen

Fluor AMI Site Capacity Expansion Project

2006 - 2006 Juncos, Puerto Rico, United States

Responsible for equipment and piping design using PDS for a five-cell

cooling tower. Generation of 2D Microstation drawings.

.

1996 - 2006

Lockwood Greene

Spartanburg, SC

Listed below are the projects Mr. Manley was assigned to during this 10

year timeframe

Lead Designer Eastman/Voridian

Lockwood Greene PET Plant

2004 - 2005 Columbia, South Carolina, United States

Responsible for the organization and tracking of all isometrics for shop

fabrication (approximately 4,000 ISOs)

Lead PDS Designer DuPont/Tate & Lyle

Lockwood Greene Biochemical Plant

2003 - 2004 Loudon, Tennessee, United States

Responsible for piping design and layout on a polymer project using PDS and

AutoCAD

Lead PDS Designer BASF

Lockwood Greene Portsmouth, Louisiana, United States

2002 - 2003

Responsible for equipment and piping to convert the exiting dilute acrylic

acid receiving, storage, and dispensing system to a glacial acrylic acid

system using 3D PDS. Generation of 2D Microstation drawings.

Lead Designer Clariant

Lockwood Greene Chemical & Biotech Unit

2002 - 2003 Mount Holly, North Carolina, United States

Prepared piping orthographic drawings and isometrics with bill of materials

for a detergent additive process facility. Areas included sunthesis,

granulation, tank farm, and utilities.

Lead PDS Designer Certainteed

Lockwood Greene Fiberglass Facility

2002 - 2003 Kansas City, Kansas, United States

Responsible for 3-D modeling of equipment and ductwork for a new fiberglass

manufacturing facility. Generation of 2D Microstation drawings.

.

Lead PDS Designer BASF

Lockwood Greene MDI-2 Project

2001 - 2002 Geismar, Louisiana, United States

Responsible for equipment and piping design, using 3D PDS, for a new raw

material tank farm. Generation of 2D Microstation drawings.

Lead PDS Designer Proctor & Gamble

Lockwood Greene Phoenix, Arizona, United States

2000 - 2001

Responsible for consolidating production of OT and ST formulas on one

making system using 3D PDS Generation of 2D Microstation drawings.

.

Lead Designer RF MicroDevices

Lockwood Greene Greensboro, North Carolina,

2000 - 2001 United States

Responsible for process and utility piping for tunnel and access floor for

microelectronics equipment. Also prepared piping plans and sections using

2D Microstation.

Lead PDS Designer Proctor and Gamble

Lockwood Greene PACE Maintenance Project

1999 - 2000 Hunt Valley, Maryland, United States

Responsible for replacing equipment and piping design for a raw material

tank farm improvement project using 3D PDS. Generation of 2D Microstation

drawings.

Lead PDS Designer Proctor & Gamble

Lockwood Greene Scrubber

1997 - 1998 Greensboro, North Carolina, United States

Responsible for equipment arrangement and piping design for nitric/caustic

unloading and Nox scrubber. Generation of 2D Microstation drawings.

Lead Piping Designer Proctor & Gamble

Lockwood Greene Shower Gel Production Line

1996 - 1997 Iowa City, Iowa, United States

Responsible for equipment arrangement and checking vendor shop drawings,

using 2D AutoCAD, for a new production line for shower gel

Lead 3D Designer Proctor & Gamble

Lockwood Greene Brown Summit

1996 - 1997 Greensboro, North Carolina, United States

Responsible for equipment arrangements and interference checks for "Big

Dawg" using 3D MicroStation

Lead Designer/Piping Group Leader 3M

Lockwood Greene MIS Expansion

1996 - 1997 Columbia, Missouri, United States

Responsible for all utility and process piping layouts for Northeast,

Northwest, and boiler expansions using 2D AutoCAD

1985 - 1996

FLUOR

Greenville, SC

Listed below are the projects Mr. Manley was assigned to during this 10.5

year timeframe

PDS Designer Elf Atochem

Fluor F134a Restart

1995 - 1996 Calvert City, Kentucky, United States

Responsible for equipment and piping design for a cooling tower and

chemical treatment building. Generation of 2D Microstation drawings.

PDS Designer Rhone-Poulenc

Fluor Methomyl Reconstruction

1994 - 1995 Institute, West Virginia, United States

Responsible for the design of an outside area skid mounted tank and piping;

filled in as needed for other areas; and developed the manual orthos for

pipe rack.

PDS Designer Elf Atochem

Fluor F134a Project

1994 - 1995 Calvert City, Kentucky, United States

Duties included offsite area tank farm layout and design using PDS. Tasks

were completed prior to the projects early ending.

Designer Cape Industries

Fluor Wilmington, North Carolina, United States

1994 - 1995

Set up AutoCAD equipment arrangements, piping layouts, and isometrics. Made

site visits and interacted with other disciplines and the client.

PDS Designer Eastman Chemicals

Fluor Polyethylene Terephalate Project

1993 - 1994 Cololeacaque, Veracruz, Mexico

Responsible for equipment and piping design for a palletizing area using

PDS.

Designer DuPont

Fluor Anistat

1993 - 1994 Camden, South Carolina, United States

Duties included manual layout and design including piping supports of

Dowtherm piping for three nylon spinning machines.

Designer Teepak, Inc.

Fluor Project Phoenix

1991 - 1992 Sandy Run, South Carolina, United States

Responsible for the setup of AutoCAD P&IDs and piping tie-ins which was

done manually

Designer MEMC, INC.

Fluor Silicon Wafer Plant

1991 - 1992 Chonan, Korea

Responsible for the setup of AutoCAD for an overseas silicon wafer

production plant. Involved with layout and design of general arrangements

that included crystal pullers, slice/grinders, edge profilers, lappers,

polishers, and double-sided scrubbers

Designer DuPont

Fluor Spinning Machines 22 & 23

1991 - 1992 Waynesboro, Virginia, United States

Duties included gathering field measurements and layouts of isometrics on

2D MicroStation.

Designer DuPont

Fluor Liquid Phase Chlorination

1991 - 1992 LaPlace, Louisiana, United States

Duties included drawing and checking isometrics for D&R and reversion work

for liquid phase chlorination.

Designer DuPont

Fluor Black Flake

1991 - 1992 Brevard, North Carolina, United States

Duties include drawing isometrics from a plastic model.

Designer MEMC, Inc.

Fluor Silicon Wafer Plant

1990 - 1991

Set up AutoCAD for an overseas silicon wafer production plant. Involved

with layout and design of general arrangements that included crystal

pullers, slice/grinders, edge profilers, lappers, polishers, and double-

sided scrubbers

Designer Teepak, Inc.

Fluor Casing Plant Rebuild

1988 - 1989 Danville, Illinois, United States

Spent seven months in the field setting up AutoCAD for the renovation and

modernization of resulted fire destruction. Also designed production

machinery and ventilation system

Designer MEMC, Inc.

Fluor Silicon Wafer Plant

1988 - 1989 Moore, South Carolina, United States

Responsible for the setup of HVAC and piping drawings for a stateside

silicon wafer production plant. Involved with gathering field data and

developing drawings for the plant's first-class, 100 clean room, 100

percent HEPA filters.

Designer MEMC, Inc.

Fluor Cleanroom Addition

1987 - 1988 Moore, South Carolina, United States

Was a member of the task force to study cleanroom conditions for a silicon

wafer production plant. Also was involved with gathering field data to

develop as-built drawings for all cleanroom areas.

Designer MEMC, Inc.

Fluor KOH Spin Cleaner

1986 - 1987 Moore, South Carolina, United States

Responsible for the setup of AutoCAD in the field. Spent three-months in

field layout and design of the KOH spin cleaner which was built and shipped

to Korea.

Designer Becton & Dickinson

Fluor Labware Transfer Facility

1985 - 1986 Durham, North Carolina, United States

Responsible for preliminary flow sheets and project setup on MicroStation

1980 - 1985

Reynolds, Smith & Hills

Greenville, SC

Listed below are the projects Mr. Manley was assigned to during this 5 year

timeframe

Designer King Saud University

Reynolds, Smith, & Hills King Saud University

1983 - 1984 Riyadh, Saudi Arabia

Responsible for ensuring compliance with all specifications, codes, and

design requirements. Resolved nonconformance in an acceptable, yet

productive manner

Designer King Saud University

Reynolds, Smith, & Hills King Saud University

1982 - 1983 Riyadh, Saudi Arabia

Duties included checking shop drawings from contract drawings for various

contractors and coordinating with Blount and Bouygues engineers for final

construction.

Designer Ecusta Corp.

Reynolds, Smith, & Hills

1981 - 1982 Brevard, North Carolina, United States

Duties included gathering field information, researching existing drawings,

and generating all new sets of drawings for the following systems: steam

and condensate, compressed air, potable water, and underground.

Designer Alton Packaging

Reynolds, Smith, & Hills Lime Kiln/Recausticizing Facility

1980 - 1981 Jacksonville, Florida, United States

Duties included field measurements on existing tie-ins for new kiln

concepts development, generation of construction drawings, and final check

field checking.

Contact this candidate