Supervisor Operator
Resume:
Kevin J. McMillan
Yuma, Az 85367
And
SH12 Lake Cherokee
Henderson. Tx 75652
E-mail: abndna@r.postjobfree.com
SUMMARY OF QUALIFICATIONS:
. 25+ years of experience.
. Supervised Drilling, Completion, and Workover operations.
. Performed work for: Quicksilver, Exxon, Devon, CrownQuest,
Chesapeake, Chevron, Amoco, Forest Oil, Enron.
. Extensive experience supervising Drilling, Directional Drilling,
Underbalanced Drilling, Shale Lateral Drilling, Tapered strings
. Extensive experience supervising Completions and Workovers, Oil & Gas
High Pressure Snubbing, Geo-Thermal Completions, Coil Tubing and
Nitrogen. Running Gas lift valves and Packers.
. Experience in rig construction, refurbishment, and rig operations
management.
. Legals, Build locations, Drill and Complete (Turn Key)
. Embodiment of the highest levels of business ethics and performance
standards.
. Outstanding career safety record: zero injuries, zero incidents.
WORK EXPERIENCE:
Consultant
Wellsite Supervisor
Well Work Over/Maintenance Supervisor
Service Hand
Tool Pusher, Driller, Derrick Hand, Floor Hand
Drilling Methods: directional, side track, slim hole,
Workovers and Completions :, re-completion, coil tubing consisting of
5 years onshore, High pressure snubbing consisting of 2 years
offshore, rig assist, hydraulic stand alone 340 rack back & 150 Quick
Jacks
Drill out composite plugs with Coil Tubing & 150 hydraulic snubbing
units up to 4100' laterals
Drilling/Mud Systems: OBM, WBM
Drilling Depth: up to 17,510 ft
Mud Weight: up to 17.5 ppg
GEOGRAPHIC LOCATIONS:
US Gulf Region: Off Shore: Gulf of Mexico, Alaska Cook Inlet
Land: WY, UT, OR, MT, NV, MI, MS, LA, OK, CA
RIG TYPES:
Platform, Land, Sub Base, Mechanical, Diesel Electric, Cabot,
Doubles, Triples, Jack Knife
5-2009 to present Ormat
Well Work Over and Maintenance Supervisior - El Centro, Ca. Supervise
daily operations of geo-thermal wells in the Imperial Valley, CA. Change
out well pumps up to 32 stages. Supervise coil tubing and nitrogen. Run
packers. Run and set bridge plugs and packers. Make repairs of holes in
casing at surface. Supervising all workover and well issues as they arise.
2009. PetroHawk Resources
Site Supervisor - Shreveport, Louisiana. Provided full range of drilling
engineering services for planning and execution of wells in Louisiana.
Provide planning and twenty-four hour supervision for Horizontal
Haynesville Shale drilling program in Shreveport, LA. Provided input for
PDC selection, in both vertical and horizontal sections, directional
strategies, spending strategies and other steps necessary to reduce days
and dollars in Haynesville shale field. (16,900'+ TVD). Generate Daily
Planner for Rig Crews and Toolpusher. Discuss 24 hr operations along with
safety issues and concerns. Report to Louisiana State Regulator on a
weekly basis on hole conditions, cement, lead and tail, displacement -
casing-grades and wt. Plan and carrying out of fishing operation.
2008 McMillan Consulting
Wellsite Supervisor - Company Man - Aledo, Texas Provided full services
to QuickSilver Resources Inc. for planning and execution of completions
within the Barnett Shale. Recruited by Quicksilver Superintendent to rig-
up two 150 snubbing units and drillout up to 10 composite plugs to PBTD on
multiwell pads with twelve foot spacing between units. Supervised
procedures, for up to five wells per day, with two inch Coil tubing and/or
Pulling Units. Tested casing up to 5000 PSI - Ran in hole with TCP guns-
wireline set packers . and run Gas lift valves, Completed wells with
laterals up to 4000'. Set in on morning meetings for weekly planning.
2007 - 2008 Sierra Engineering
Wellsite Supervisor - Company Man Oklahoma City, Oklahoma Provided well
site supervision for Drilling and Completions Operators. Operator -
CrownQuest in southern Utah Underbalanced Drilling. Design of BHA's and
Bit selection. Worked through lost circulation issues. Conducted safety
meetings with zero accidents. Weekly BOP Drills with no offset well to
refer to, making onsite discussions quick and effective and keeping cost
to a minimum. Operator - Chesapeake, Texas. Wellsite Supervisor on a
Barnett Shale well. Drilled to TD, run long string casing and cement and
skid rig twelve feet to spud new well. Requested by Devon Energy to drill
and complete two wells in Kansas. Operator - Devon Energy, Kansas.
Coordinate with land owner, state and local agencies. Stake and build
location. Run water supplies to drill rig. Drilled two wells making bit
selections, designing BHA's, did research from offset wells. Worked with
Geology and Engineer to determine running DST's to TD. Supervised open
hole logs. Ran casing and cement. MIRU polling unit acidize and swab in
wells. Drilled and Completed wells to finish. Drilled Footage and Day
Rate. No lost-time accidents, significant spills or prohibited releases to
atmosphere.
2005-2007 Arrington Oil and Gas
Wellsite Supervisor - Company Man Midland, Texas Supervisor for Drilling
operations in the Barnett shale for approximately 20 Horizontal wells.
Developed new procedures for Open Hole whipstocks drilling out
capabilities from 3' to 10' to run in hole with curve assembly and build
curve to 90 degrees. Run and set DV tools for two stage cement. Laterals
up to 4000' feet working with Directional and MWD with wireline retrieval
of MWD on failures. Supervised open hole logs. Worked closely with
Geology, state and local Governments Railroad Commission. Drilled two
wells in Mississippi. Designed and built rig roads and locations. Worked
through Gumbo. Lost circulation and waterflow issues. No offset wells to
refer to. Designed BHA's and bit selections. Drilled Vertical and
Horizontal with motors up to 1.75 bit to bend. Both Roller cone and PDC.
Zero accidents. No spills or prohibited loss to atmosphere.
2002-2005 and 1989-1991 Cudd Pressure Control
Special Services Longview, Texas International Well Control and Snubbing,
Coil tubing, Freeze jobs and Nitrogen. Snubbing, tubing, blast joints and
collars up to 10,000 PSI. International Offshore Gabon - Cameroon -
Africa- Gulf of Mexico for Chevron and various operators. Supervised on
Osprey Platform in the Cook Inlet, Alaska for Forrest Oil. Planning 24
hours. Recompletion procedures on 340 Rockback unit for packers -
wireline, tubing torques. Zero accidents. No spills. Trained offshore
water survival. Helicopter under water egress. Personal basket/swing
rope. Worked for Cudd Rocky Mountain Division as Snubbing operator, Coil
tubing and nitrogen operator from 1989-1991
1994-1999 Summitt County, Utah
Patrol Deputy Officer, K-9 handler and SWAT Summitt County, Utah Self-
sponsored Cadet and graduated Utah Post (Police Officer and Standards
Training). Patrol Officer, K-9 Handler, SWAT, Radar Instructor. Trained
K-9 Search and Rescue teams. Worked SWAT. Details for FBI and DEA on
multi-juridical warrants with K-9. Awarded two silver medals at K-9
Olympics in Narcotic and Apprehension.
1999-2000 Sublette County, Wyoming
Patrol, K-9 and SWAT Sargeant Sublette County, Wyoming Field training
officers for new Deputies. Administration changed, Retired K-9, Returned
to oil and gas career.
1992-1994 Rocky Mountain Testers
Owner and Operator Big Piney Wyoming Owner and Operator Nipple up and
Testing Co. BOPs - Flanges - Manifolds with air and hydraulic torque.
Test BOP's, pipe lines, Leak off tests- Casing tests, Tested with H2O,
Glycol-Methanol pressures from 0-10,000 PSI. Manage office employees and
field work. Supervise yearly shut down operations for Exxon Shute Creek
Facility. Re-torque flanges HYD to 50,000 ft lbs. Test pipeline and
production facility for Chevron Birchcreek Facility. Rebuild and Redress
BOP's in field. Rams, hydraulic seals. Comply with state and local BLM
offices and officials. Zero accidents - Wyoming, Colorado, Oregon,
Nevada, Montana, and Utah.
1991-1992 Double Jack Testing
Nipple-up Tester Evanston Wyoming Nipple-up BOP's, pipelines, manifolds
flanges on Drilling rigs and Completions. Production facilities. Operate
hydraulic BOP lifts. Supervise annual shut down at Geo-Thermal Plant in
Dixie Valley, Nevada. Testing from 0-10,000 PSI.
1978 - 1991 Parker Drilling-Burris Drilling
Roughneck - Driller - Tool Pusher Rock Springs, Wyoming Drilling and
completions 1978-1989. In 1976 started as floor hand for Parker Drilling
Rig 56 jaw clutch compound rigs. Worked my way up to Derricks - Driller -
Toolpusher. Worked for Brinkerhoff Signal -Parker - Burris Drilling - Rio
Grande - Lofland - Penrod. Supervised both land and offshore for Shell off
Huntington Beach, CA, Geo-Thermal wells in El Centro, CA and Falon, Nevada.
Operated and pushed tools on pulling units in the Overthrust Belt on wells
producing up to 20 million a day. Zero accidents.
INDUSTRY TRAINING:
Offshore water survival, Helicopter underwater egress, Personal basket
swing rope
B.I.S.O.N Training
Fall protection
PPE
Rigpass/Pec/System 21
Back safety,
Drug awareness
Ladders
Electrical safety
Workplace Violence Prevention
Wasatch High School; Diploma Heber City, Utah
Successfully completed numerous industry schools/seminars dealing with
drilling,
completions, certified well control, well testing, and production
Computer Experience and Applications
. Experience with various petroleum software (DIMS, Rim Base, PASON and
RIG WATCH and well testing, etc.), PC software and Internet data
sources.
Contact this candidate