Arunya Suresh

**** ********** **** ****. ***, Blacksburg, VA 24060

mailto:abnbst@r.postjobfree.com

817-***-****

http://www.linkedin.com/in/arunyasuresh

Objective:

I want to apply my knowledge and skills towards the betterment of the

present technology and to grow as a potential engineer.

Skills:

. Hands-on experience and knowledge (with relevant coursework) in

Metallography, Heat Treatment, Scanning Electron Microscopy, Energy

Dispersive Spectroscopy, Fourier Transform Infrared (FT-IR)

Spectroscopy, UV-VIS, Lang, Laue and X-ray Diffraction, Nanomechanical

Indentation, Profilometry, Hardness testers (Rockwell, Brinell,

Vickers, Knoop), Differential Scanning Calorimetry (DSC), various

tribological testing machines

. Fundamental understanding of various aspects of Materials Science,

including phase transformations, mechanical behavior, analysis

techniques, shape memory alloys and failure analysis

. Familiar with softwares including Design of Experiments, Kaleidagraph,

Origin, C/C++, MS Office (2003 and 2008)

. Good oratorical and written skills

Education:

. M.S. (Thesis), Materials Science and Engineering (January 2008-

December 2009);

University of Texas at Arlington

GPA: 4.0 (on scale 4.0)

. Bachelor of Technology, Metallurgical Engineering

Malaviya National Institute of Technology, Jaipur, Rajasthan(India)

GPA: 8.98 (on scale 10); Gold Medalist

Scholastic Achievements:

. Awarded the Materials Science and Engineering Department Scholarship

for excellence in research, GPA and overall performance

. Recipient of the Gold Award in the Student Poster competition at the

STLE 64th Annual Meeting and exhibition held in Orlando (Florida) from

May17th-21st, 2009

. Member of Tau Beta Pi (2009)

. Gold Medalist in Metallurgical Engineering (2006) for outstanding

academic excellence with GPA of 8.98/10

Leadership Skills:

. Acting Treasurer of the American Society of Materials- UT Arlington

(Student Chapter 2008-2009)

. Co-chaired session with Dr.Jean-Michel Martin at the Society of

Tribologists and Lubrication Engineers (STLE), Orlando, FL (May 17th -

21st 2009)

. Organizing member and student presenter for the ASM Summer Camp for

Kids 2008 and 2009

. Volunteered at Mission Arlington as a part of Community Service (2009)

Research and Work Experience:

. Student Computer Lab Assistant, University of Texas at

Arlington;August 2009 till December 2009

. Graduate Research Assistant, Tribology Lubrication and Coatings

Laboratory

University of Texas at Arlington; January 2008 till December 2009

. Assisting student, Trinity Industries,Inc., Navasota, TX;

September2008-December 2008

. Software Engineer, Accenture Services Pvt. Ltd., Chennai, TN (India);

July 2006 - January 2008

. Student Intern, Engineering, Indian Institute of Technology, Chennai /

Indian Institute of Technology, Roorkee (India); May 2005-June2005/

June 2005-July 2005

Publications:

. Arunya Suresh, Ramoun Mourhatch and Pranesh Aswath, "Effect of Test

Parameters on the Four Ball Wear and Weld Performance of Greases with

MoS2 and without MoS2 as EP Additives", Paper 08XX, NLGI Annual

Meeting Williamsburg, VA, USA, June 7-10, 2008.

. Jai Ganesh, K.; Suresh, Arunya, "Fabrication and characterization of

Cu-14Al-3.5Ni shape memory alloy by ingot metallurgy", Materials

Research Society Symposium Proceedings (2006), Vol 888, p 317-322

. Ganesh, K. Jai; Suresh, Arunya; Maheshwari, Prateek; "Preparation and

Characterization of Cu-Al-Ni Shape Memory Alloys by Ingot

Metallurgy", Proceeding of the 3rd European Metallurgical Conference

(EMC 2005), Vol II, Pg. 839-849

. Maheshwari, Prateek; Singh, Vivek; Ganesh, K. Jai; Suresh, Arunya,

"Fabrication of Nanostrucured Shape Memory Alloys using Cold Rolling

Technique", Materials Science and Technology 2005 - Proceedings of the

Conference, Volume 3, p 53-58

Presentations:

. Technical presentation titled "Studying the effect of Test Parameters

on Four-Ball Wear and Weld Performance of Greases with and without

MoS2 as EP Additive", STLE 64th Annual Meeting & Exhibition held in

Orlando (Florida) from May 17th through May 21st 2009.

. Technical presentation at the Society of Tribology Lubrication and

Engineers (STLE) North Texas Chapter, Fort-Worth,TX, USA on December

9, 2008

. Technical presentation made at the National Lubricating Grease

Institute (NLGI) Annual Meeting Williamsburg, VA, US on June 7-10,

2008

Memberships in Professional Societies:

. Society of Tribologists and Lubrication Engineers (STLE)

. American Society of Materials International (Acting Treasurer and

officer, UTA Students' Chapter)

. The Minerals, Metals and Materials Society

. American Oil Chemists' Society

. American Ceramic Society

. Tau Beta Pi

References:

Dr.Pranesh Aswath

Professor and Associate Chair -Material Science & Engineering,

University of Texas at Arlington

abnbst@r.postjobfree.com; (817) 272 - 2398

Dr. Hal Shaub

Senior Technical Officer, C.I., INC.

abnbst@r.postjobfree.com; 817-***-****

Dr.Ramoun Mourhatch

Post-Doctoral Fellow; University of Texas at Arlington

abnbst@r.postjobfree.com; 214-***-****

Matt Hawkins

Managing General Partner; Adjacent Capital, L.P.

abnbst@r.postjobfree.com;214-***-****

Contact this candidate