BRIAN S. PORTER
***** ******** ****** ? Strongsville, Ohio
44136
440-***-**** (Residence) 440-***-****
(Cell)
abmsqb@r.postjobfree.com
Summary of Experience
More than 20 years experience as a Tooling Engineer and Manager in the
metal stamping industry with manufacturers of components for the
automotive industry, and lawn and garden power equipment. Extensive
background in tooling project management, APQP and PPAP documents, parts
design, and material selection.
2008 to Spartanburg Steel Products, Inc., Spartanburg, South Carolina
2009 A privately-owned $150,000,000 manufacturer of stamped metal parts,
welded sub-assemblies, and stainless steel
containers for the Automotive, Consumer, and Industrial sectors.
Tooling Engineer: Responsible to the Vice President of
Manufacturing for providing expertise to the upfront business
development group for BMW and John Deere tooling and stampings.
Additional responsibilities included: Project
management and tooling for new European mower deck - all APQP phase
gates on schedule; for problem solving and
troubleshooting day-to-day production problems of metal stampings;
internal stamping plant buy-offs based on PPAP's
and home line commissioning.
. Provided expertise to the upfront business development group
for BMW and John Deere tooling and stampings.
. Worked with John Deere product engineers on concept and
development of stampings.
. Reviewed and approved quoting of outside services for new,
refurbished, and cost reduction tooling projects including a
project valued at $7,000,000 on 11 refurbished tools.
. Provided input on GD&T and DPAR of part prints, approved
tooling / fixture designs, and signed off on outside tooling.
. Updated all APQP documents, timelines, engineering notices,
ISIR's, PPAP's, and all other necessary paperwork.
. Solved problem on simulations of draw dies involving material
selection, design of parts, and splitting issues.
. Participated in cost reductions to help reach customer
demands for improved costing and performance.
. Chosen to participate on special John Deere / SSP team to
help SSP gain partner level with 3 John Deere Divisions.
2008 to Digital Dish, Brooklyn Heights,
Ohio
2008 A provider of network satellite
systems and Internet services.
Field Service Technician:
Responsible to the Senior Field Technician for
complete installation services, repair and
troubleshooting for service calls.
Provided customer service and instruction to
customers for purchased systems.
2005 to Die-Matic Corporation, Brooklyn
Heights, Ohio
2007 A manufacturer of metal stampings.
Tool Room Manager: Responsible to
the Director of Engineering for coordinating
and managing all new tool building
of progressive, transfer, and
single hit dies. Additional responsibilities
included the planning and assigning of all die
repair, wire edm, cnc, and sensor
repair in tool room. Coordinated and planned
2 shifts with 27 employees.
. Reduced work staff by 8 employees. Minimized labor costs and
overhead saving over $300,000.00 in one year.
. Prepared die repair status log for daily production meeting.
Participant in weekly problem solving meeting.
. Participated in all APQP, PPAP and quality meetings for TS
16949. Held lean events for tooling department processes.
. Mentored new floor supervisors and oversaw apprentices in
tool room.
. Determined timelines for all "In Press" die repair for small
and large single hit, progressive, and transfer tooling - 45
to 800 Ton.
Resume of Brian S. Porter
Page Two
1999 to MTD Consumer Products, Valley City, Ohio
2005 A global manufacturer of outdoor power
equipment, including lawn mowers, for both
residential and commercial markets.
Senior Stamping & Tooling Engineer:
Responsible to the Vice President of
Manufacturing for all external tooling
from print release through PPAP and
final approval of all internal ISIR's.
Additional responsibilities included providing
preliminary tool cost estimating,
piece part pricing, and reviewing strip
layouts and part designs in Unigraphics.
. Served as stamping consultant for all 5 internal MTD product
design-engineering groups and managed large special
Tooling/Stamping projects. Selected correct raw materials,
and surface finishes for all stampings.
. Troubleshot progressive, transfer, and single hit tooling
problems at MTD's external manufacturing facilities.
. Saved over $2,500,000 in cost reduction activities on outside
tooling over a 3-year period.
. Participated in several weeklong lean manufacturing
reductions for assembly of tillers, lawn mowers, and snow
throwers. Participated in product manager meetings for APQP,
project timeline meetings, and PPAP team closeout meetings.
. Participated in design FEMA's for safety and manufacturability of
stampings in outdoor power equipment.
. Developed deep drawn lawnmower deck from stainless steel.
1996 to Luk, Incorporated, Wooster, Ohio
1999 A worldwide supplier of parts to the automotive industry
including torque converters, clutches, and hydraulic pumps.
Production Manager - Stamping & Die Repair: Responsible to the
Executive Vice President for coordinating a
$60,000,000 stamping production and die repair for a $135,000,000
company. Additional responsibilities included all personnel
decisions in stamping department consisting of 35 employees and 10
toolmakers in the die repair department.
. Press sizes from 60 to 400 tons for single and progressive
hit tooling, and 3 transfer presses ranging from 1200 to 2400
tons. Reviewed charting of all pressroom activities for
utilization, capacities, and efficiencies. Responded with
action plans.
. Tracked and monitored parts quality: QS9000 - 3rd edition,
SPC, control charts, process sheets, routing tags, and
blueprints.
. Participated in weekly customer complaint, material review,
quality review, PPAP, operation, and pit meetings.
1981 to Held position as Journeyman/Tool &
Die Maker with Zip Tool and Die Company,
Incorporated in Cleveland, Ohio then 1996
became a CAD Tool and Die Design Engineer and
then promoted to Project Manager with Stamco
Industries,
Incorporated in Euclid, Ohio; Engineering
Manager with Northern Stamping, Inc. in
Garfield Heights, Ohio; and Project
Manager/Estimating Engineer with Atlantic
Tool and die in Strongsville, Ohio.
EDUCATION
Studies in Computer Information Science -
School of Engineering - Ohio State University
- Columbus, Ohio - 1978 - 1981
ADDITIONAL TRAINING
Principals of Lean Manufacturing with Simpler
Consulting Services - 2005
Baldwin Wallace Project Management Certificate
Program - 2002
SME Stamping Die Certificate Program - 2001
GD&T ANSI Y14.5 (1982) - 1992
Acme School of Design Engineering - 1988 -
1989
Mechanical Design with AutoCAD - 1987
Tool and Die Apprenticeship - Certificate #
24281 - 1981 - 1984
WINOC PPAP and advanced PPAP Certification
AWARDS
Valeo Clutch and Transmission Supplier
Appreciation Award - Met expectations on new
U.S. clutch cover programs. Designed and
developed new product processes.