Suppiah Chandrasekaran ("Chandra")
*** ******* **** **. ********, GA 30068, USA.
Email: abmn7y@r.postjobfree.com;
Phone: Home- 770-***-****; Cell - 404-***-****
OBJECTIVE
Civil/Structural Engineer seeking challenging position in Structural
Design, Construction and Project Management.
PROFILE
. Structural Design:
o Industrial buildings, Energy/Power and Oil/Gas industry: Perform
engineering duties in planning, perform structural analysis, design
and provide details. Design of spread and pile foundations, Pipe
rack Flue gas ducts of complex geometry and support structure,
aircraft hanger and maintenance building.
. Construction:
o Provide on-site technical support. Resolve conflicts, provide
miscellaneous on-site structural design solutions and perform
structural audit on structures.
o Provide engineering, quality control for construction of highways,
concrete bridges, Airport Terminal, Sea port dock, Rerouting
utilities, foundations, Pre-cast plant, dams and pipelines.
. Project management:
o Oversee construction projects, manage schedule, cost and resources,
Review/approve submittals, and change orders. Prepare proposals.
o Liaise with statutory authorities, subcontractors and clients.
Coordinate and permitting and regulatory and environmental
compliance issues.
o Estimation, bid for site development projects $3-6 Million range.
WORK AUTHORIZATION
Permanent Resident /Green Card.
EDUCATION
MBA-Finance, 2004, Kennesaw State University, GA. USA.
MS. Structural Engineering, 1994, University of Rhode Island, RI. USA.
BS. Civil Engineering, 1978, Indian Institute of Technology, Madras, India.
PROFESSIONAL REGISTRATION
Chartered Engineer (MICE) -The Institute of Civil Engineers (UK).
EIT
EXPERIENCE
(7/2009 - 2/2010) Southern Company, Atlanta, GA. - Structural Engineer
. Plant Yates-Coal fired power plant, Georgia: Modeled, analyzed, designed
flue gas ducts from Pre-Heater to Economizer for 400 0F temperature and
180 psf operating pressures. Prepared hand calculations and details for
fabrication, supports /restraints, modular joint connections. Review
design calculations and construction drawings.
(01/2008 - 02/2009) Foster Wheeler, Houston, TX. - Structural Engineer
. BP OCC Refinery Project, Indiana: Designed concrete pile foundations and
anchor bolts for vertical and horizontal vessels and exchangers. Analyzed
and designed pipe rack steel modules including connections and
foundations for various load conditions/scenarios including
fabrication/transportation (lifting, trailer transportation, sea forces,
seismic, wind) and stick build construction.
. Designed silencer supports for fired heaters and access platforms for
vertical vessels. Designed connections and anchors.
. Reliance Refinery, Jamnagar, India: Provided on-site technical support.
Resolved conflicts provided miscellaneous structural designs for pipe and
equipment supports, Access platforms, stairs, mono-rails and performed
structural audit on fired heaters, pipe racks, vessel/exchanger
platforms, foundations, compressor building, and Coker cutting deck and
tower. Compiled as built drawings.
(12/2005 -12/2007) Kennesaw State University, Kennesaw, GA, Adjunct
Professor
. Teach Business Statistics for Undergraduates.
(06/2007 - 12/2007) Ch2MHILL/Lockwood Green, Atlanta, GA. - Structural
Engineer
. Gainesville Regional Utilities (GRU), power plant, Florida: Modeled,
analyzed and designed steel support structure for inlet and outlet flue
gas ducts from SCR-BagHouse-Stacks. Prepared detailed survey of existing
underground utilities. Designed and detailed tie-in to existing structure
and pile foundations. Developed details for sliding/bearing supports and
designed pile foundations. Designed steel framing and pile foundations
for lime hydration building. Reviewed shop drawings and analysis model
for Sulfur Catalectic Reactor (SCR) support structure.
(2005 - 5/2007) BE &K Engineering/Southern Company, Atlanta, GA. -
Structural Engineer
. Plant Barry-Coal fired power plant, Alabama: Modeled, analyzed and
designed 1200 tons of flue gas ducts from Economizer to SCR to
Precipitator for 800 0F temperature and 180 psf operating pressures. Avg.
duct size 40'x50'x80'. Reviewed design calculations and reviewed drawings
. Prepared conceptual duct and support structure designs with estimates for
retrofit for Branch Power plant to meet EPA requirements.
(2000- 2004) AMEC Inc., Decatur, GA. - Structural Engineer
. Phoenix Cement plant: Analyzed and designed duct and miscellaneous
Equipment supports, and access platforms.
. Lucent Fiber optic plant extension: Prepared floor layout, and designed
spread and machine foundations
Franklin -Combined cycle power plant (Tennessee Valley Authority)
Designed Pile foundations for transformer building, external equipment
foundation and miscellaneous support structures.
. Pulp and Paper: Retrofit design for new equipment platform design
including checking existing foundations for capacity.
(1995-1999) DPS Inc., Atlanta, GA. - Project Manager
Roberta Smith Middle School, Clayton County, GA
Slaton West Middle School, Atlanta, GA
Clarkston Middle School, Stone Mountain, GA
North Springs Station, (Marta), Atlanta, GA
. Project Management: Managed and controlled site development projects
involving Site clearing/grubbing, earthwork, underground utilities,
concrete retaining walls, rock excavation, tunneling, roadways/asphalt
paving. Allocated resources and tracked progress variables, Controlled
budget, schedules and subcontractor work. Prepared submittals, change
orders, invoices and progress reports.
. Quality Control: Provided and Enforced quality control and safety
measures to projects.
. Estimation: Prepared competitive bids for site work, concrete work and
utilities. $3-6 million range. Estimated quantities, priced materials and
subcontractor work. Reviewed and selected materials, vendors,
subcontractors. Liaise with bonding agent, client and statutory
authorities.
(1992-1994) University of Rhode Island, RI - Research/Teaching Assistant ~
Dept. of Transportation CT & RI.
. Coordinated survey and compiled data on performance of bridge deck
joints. Researched, analyzed and compared performance of different types
of deck joints, cost, suppliers and installation procedures.
. Identified variables that affect and critical to performance of deck
joints for study. Modeled bridge deck joints and analyzed performance of
existing joints and developed performance standard.
. Teach Structural Engineering laboratory (material and concrete testing)
and surveying for undergraduates.
(1978-1992) Balfour Beatty Construction (UK) and Crippen International
(Canada) - Sri Lanka & United Arab Emirates (UAE). -Project Engineer.
Dubai-Alain highway (UAE). Project manager-Oversee construction of 6 Km, 6-
lane highway and interchange with two span pre-cast concrete bridge. Manage
schedule, equipment, labor, change orders and progress meetings. Provided
quality control on soil and concrete.
Jebel Ali Sea Port (UAE). Project Engineer- Oversee
Engineering/construction for retrofit to 2 Km quay wall- above and below
MSL, including structural repairs to large dia. pipe piles below water
level. Corrosion Control. Designed steel platforms jackets for concrete
repairs. Coordinated repair/concrete works with tides and shipping
schedules by ports authority. Coordinated installation of fenders, access
ladders and mooring bollards. Designed and supervised construction of
Gantry crane foundations.
Dubai International Airport (UAE). Project Engineer- Provided engineering,
quality control, planning and supervision of construction of Arrival
Terminal building and expansion of concrete Apron.
. In charge of Pre-Cast manufacturing plant. Provided engineering support
for construction of foundations and super structure.
. Analyzed, designed and provided engineering supervision of construction
of 130 meter twin Aircraft Hanger, multi story Office/warehouse building,
teaching hospital. Route existing utilities - Foundations,
. Supervised design, procurement and construction of 12 KM of 48 inch dia.
fiber glass storm water line, pump station, dewatering, boring under
Highways, manholes and outlet structure including pressure testing pipe
line. Designed coffer dams for excavation of pumping station at outfall.
. Prepared project proposals with cost estimates for ware houses, cold
storage facility, Cargo terminal and institutional buildings.
Victoria Concrete Arch Dam- Hydro Power - Sri Lanka. Section Engineer-
Designed formwork and prepared reinforcement drawings for in-situ and
precast concrete. Provided engineering, planning, quality control,
supervision and coordination of construction of 390 ft high arch dam and
spillway. Inspected formwork, rebar, chill water pipes and miscellaneous
items and poured concrete at 9,000 m3/week. Supervised installation of
instrumentation to monitor settlement and movements on the dam.
Rock-fill Dam- - Hydro Power - Sri Lanka. Section Engineer - In charge of
drilling and grouting of 150 feet deep grout curtain. Provided inspection
and Quality Control on earth core/rock-fill embankment construction.
Monitored soil testing. Performed Time study and analysis on 1.5 million cy
of rock excavation and embankment fill for the dam. Performed stability
analysis, flood routing, Freeboard estimation, river diversion proposals,
quantities for initial international bid, specification etc, for the dam.
SKILLS
. Software: Microsoft Excel, Word, Power Point, Access, Visual Basic,
Agtek, Microsoft Project-Scheduling, SureTrac, AutoCAD, Smart plant
Review, MathCAD, StaadPro, GTStrudl, Ansys.
. Codes/design practices: Conversant with ACI 318-05, ASCE 7-05(wind, live
and seismic) AISC, PIP- Structural (Process Industry Practice), ASCE Task
Committee- Wind loads on Petro Chemical Facilities, IBC 2006(wind, live
and seismic).
PERSONAL
. Permanent Resident /Green Card.
. Open to relocation
. Volunteer- Habitat for Humanity, North Metro Atlanta, GA
(Rating 9/10)