JOHN A. RAIDL, P.E., C.E., S.E.
Structural Engineer
PROFESSIONAL EXPERIENCE
John A Martin & Associates of Nevada, Las Vegas, NV
Associate Structural Engineer
Director of Federal Division marketing focused on attainment of
Federal Design-Build and AE Services contracts. Responsible for
searching and evaluating potential contracts and proposal preparation
using government form SF330. Developed tracking spreadsheet of
potential Federal D/B projects and posted on firm's Federal website.
This spreadsheet is update weekly and registrants are notified by
email automatically.
Design and analysis responsibilities included the Sahara Casino &
Hotel renovations which added steel braced frames, concrete shear
walls and steel moment frames in Seismic Design Category C conforming
to the IBC 2006; Fountaineblue Casino floor modifications; NY-NY
Brooklyn Bridge pier repairs; Regional Justice Center renovation of
3rd to 4th floor column removal; and Structural Plan Reviews for VA
Outpatient clinics. Please see www.jamanv.com .
Pulte Building Systems / Pulte Homes, Inc. Las Vegas, NV
2006 - 2008
Senior Structural Engineer Mountain West Division
Structural engineering manager for the division in responsible charge
of the design, field repairs and liaison with outside engineering
design consultants . Also responsible for day to day management of
engineering staff, coordination of projects with architectural studio.
Projects include structural analysis and design of upscale
residential projects using wood framing, roof and floor trusses, shear
walls, post-tension slab-on-grade foundations and conventional
concrete foundations on expansive and collapsible soils.
Toll Architecture / Toll Brothers, Inc. Scottsdale, AZ
2005 - 2006
Engineering Manager Southwest Division
Engineering manager for the division in responsible charge of the
design, field repairs and liaison with outside engineering design
consultants . Also responsible for day to day management of
engineering staff, coordination of projects with architectural
studios.
Projects include structural analysis and design of upscale
residential projects using wood framing, roof and floor trusses, shear
walls, post-tension slab-on-grade foundations and conventional
concrete foundations on expansive and collapsible soils.
Poe & Associates, Inc.
2004 - 2005
Senior Structural Engineer / Project Manager
Project manager and structural engineer for industrial and
architectural projects. Responsible for design, management and
financial activities of projects for the firm.
. Designed upscale residential projects including Tall Walls, Narrow
Wall Portal Frames, EWP, roof trusses and framing, floor framing
and foundations.
. Prepared seminar to builders for the City of Topeka on the IRC 2003
code.
. Parking garage condition assessment reports and repair design.
Some repairs using carbon fiber material per ACI 440.2R-02.
. Designed Farpoint Observatory Kessler Building with retractable
roof.
. Designed second floor composite steel addition to existing
Steinmart building to add 34,000 sq. ft to change occupancy from
retail to office.
Engineering Design Service, Inc., Topeka, Kansas
1996-2004
President
Project manager and structural engineer for industrial and
architectural projects. Responsible for design, management and
financial activities of projects for the firm.
. Designed five major plant expansions at Heinz Pet Products Plant,
Topeka, KS consisting of precast construction as well has heavy
structural steel.
. Designed several projects at Frito-Lay, Topeka, KS including
aluminum and stainless steel structures. On-call structural
engineer for the plant.
. Designed new and remodel commercial structures.
. Designed multifamily and residential structures.
Bartlett & West Engineers, Inc., Topeka, Kansas
1994-1996
Project Manager
Project manager and structural engineer for industrial and
architectural projects. Responsible for design, management and
financial activities of projects.
Watkins Student Health Center Expansion - University of Kansas, Lawrence,
Kansas
Corruth-O'Leary Hall Office Expansion - University of Kansas, Lawrence,
Kansas
Heinz Pet Products, Topeka, Kansas - Structural engineering equipment
supports for Kozy Kitten and 9 Lives pet food product lines.
Frito-Lay, Inc., Topeka, Kansas - Design-build project of conveyor
support/screen structure into existing facility. Prepared preliminary
studies, design recommendations and estimated construction costs leading to
contract for construction.
Reser's Fine Foods, Topeka, Kansas - New potato truck dump structure
Steel & Pipe Supply Co., Olathe, Kansas - New warehouse facility with rail
access and overhead traveling cranes.
B-57 Static Display, Air National Guard, Forbes Field, Topeka, Kansas -
Designed the support structure for the base entrance display of a B-57
bomber. This display is one of the largest of it's kind outdoors.
AMC Theater, Dallas, Texas - Designed heavy structural steel bolted beam to
HSS tube connections for Capital Iron Works the fabricator. Many beams
were the new W40 size.
USP&FO Warehouse Expansion, Army National Guard, Topeka Kansas - Designed
new warehouse expansion and hazardous materials storage structure and
explosion venting.
Topeka Water Treatment Plant - Designed Phase I improvements to treatment
facility filters, new filter piping supports and new discharge structure.
Black & Veatch, Kansas City, Missouri
1985-1994
Structural Engineer
Structural engineer on a wide variety of projects with varying
responsibilities of supervision of other engineers, designers, and
technicians.
Taiwan Power Corporation, Taipei, Taiwan - Assistant project structural
engineer in charge of structural design. This project was one of the first
international EPF projects at B&V. It provides for the design, fabrication
and delivery of flue gas desulphurization equipment for Units 5 through 8
at Taichung, Taiwan.
Suralaya Steam Power Plant, Jakarta, Indonesia - Wrote formal bid
evaluation and recommendation documents to be used by the World Bank for
financing.
IBM - San Jose, California - Project engineer leading the structural,
civil, mechanical, electrical and architectural disciplines. Developed the
design criteria and conceptual design of a chemical distribution pipe
trestle support structure. The system was approximately two miles in
length connecting several manufacturing buildings and spanning a major four
lane road. The pipe system was a pipe-in-pipe containment system designed
for three levels of seismic hazards and federal and state EPA regulations.
The project successfully withstood the rigors of third party peer review in
California.
General Motors Press Plant, Fairfax, Kansas - Designed the structural steel
and concrete press floors to resist 2000 psf floor loadings.
Supersonic Wind Tunnel - NASA Lewis Research Center, Cleveland, Ohio -
Created a three-dimensional FEA model of wind tunnel turning vane for
pressure and thermal loadings. Made the recommendations to the Managing
Partner for the purchase of the software and computer hardware used to
perform these studies.
Aberdeen Proving Grounds, Maryland - Created a three dimensional FEA model
of a proto type of a nuclear blast shock tube testing apparatus and then
performed stress analysis for final design.
Orlando Utilities, Orlando Florida - Design review of the turbine-generator
concrete pedestal, boiler ductwork and other buildings confirming quality
and conformance to the owner's project specifications, standards and local
codes.
Freudenberg Nonwovens - Durham, North Carolina - Established the design
criteria and lead the engineering team in the design of 180,000 square foot
manufacturing facility.
Lock & Dam 26, Alton, Illinois - Designed Lock facilities for Corps of
Engineers project.
Howard, Needles, Tammen & Bergendoff, Kansas City, Missouri
1984-1985
Project Structural Engineer
Project structural engineer on a variety of architectural design
projects with supervision and responsibilities of other engineers and
technicians.
Post-tensioned two-way flat plate parking garage in Phoenix, Arizona.
Evaluated and designed renovations to two historic buildings in Kansas
City, Missouri (circa 1908).
Designed several small commercial office buildings using steel, concrete
and wood building materials.
Standard Havens, Inc., Kansas City, Missouri
1983-1984
(Baghouse and asphalt equipment manufacturing company)
Project Manager
Project manager in the customer service department coordinating and
directing activities of the engineering, purchasing, shipping, and
manufacturing departments in the production and delivery of company
products to customers.
Self employed, Leawood, Kansas
1982-1983
(Consulting Structural Engineer)
Consulting Structural Engineer
Provided contract design and consulting work to other Kansas City area
engineering firms.
Provided expert witness testimony and services to a child day care building
owner. A large dollar judgment was awarded by the jury to my client.
Burns & McDonnell, Kansas City, Missouri
1973-1982
(A 900 employee engineering and architectural design consulting firm)
Structural Engineer
City of Austin, Texas 200 Mw Power Plant - Assisted the project structural
engineer in the structural design of the plant facilities and coordination
of design activities with other departments.
Southern Illinois Power Cooperative 200 MW Power Plant - Assistant project
structural engineer preparing design details and construction documents of
plant facilities and equipment.
Board of Public Utilities Sikeston Power Station #1, Sikeston, Missouri -
Project structural engineer directing, coordinating and evaluating
activities of project staff in preparation of construction contract
documents. Administered construction contracts and negotiated change
orders.
EDUCATION
BS Structural Engineering 1974 Finaly Engineering College, Kansas City, Mo
Attended University of Kansas, Lawrence, Kansas
PROFESSIONAL STATUS
Registered Professional Engineer in the states of:
Kansas, Missouri,
North Carolina, South Carolina, Oklahoma
Arizona (Structural), Nevada (Civil)
California (Civil) - Pending
Member American Society of Civil Engineers
Professional Member American Institute of Steel Construction
Professional Member Concrete Reinforcing Steel Institute
Past President ACI Kansas Chapter
Past President CSI Flint Hills Chapter
COMPUTER SOFTWARE
28. GT STRUDL
29. COSMOS
30. PATRAN
31. VAX system
32. STAAD III PRO
33. RISA 3D & FLOOR
34. RAM Advanse
35. MATHCAD 14
36. EXCEL
37. FEMAP
38. RAM Stuctural Syst.
39. AUTOCAD
40. AUTO LISP
41. BASIC
42. FORTRAN
Contact Information:
Cell phone: 785-***-****
Home Phone: 702-***-****
Email: abmeyz@r.postjobfree.com
Address: 2378 Rainswept Ave
Henderson, NV 89052