Software Design
Resume:
Walt Sanders
Crestview, FL *2536
*************@*****.***
Employment Experience:
Spirit Aerosystems Manufacturing Engineer
Contract through Volt June 2010 - Present
3330 N. Mingo Rd. Generation of 3D installation models to aid manufacturing
Tulsa, OK 74116 and planning during the build of the Gulfstream G650 wing.
Served as liaison to manufacturing. Software utilized:
Right Hemisphere, Enovia LCA, Catia V5 and standard MS
Goodrich Lighting Systems office software.
Contract through Apex
Systems
129 Fairfield Street Designer
Oldsmar, FL 34677 April 2010 - June 2010
Provide 3D design, modeling and drawing support for the
redesign and replacement of exterior lighting on the wing
and front landing gear for the Boeing 787 aircraft.
M-7 Aerospace Software utilized: Catia v5, Teamcenter Eng. (PDM) and
Contract through Patriot various Microsoft Office programs.
Technical
10823 NE Entrance Rd
San Antonio, TX 78216 Mechanical Design Engineer
August 2009 - March 2010
Design and modification of aluminum and composite airframe
structural components to support installation of counter
measure missile warning defense system on Army Cessna
DRS Technologies Citation 560 aircraft. Extractions from 3D models for 2D
Contract through Aerotech drawings once design is complete. Software utilized:
645 Anchors St. Catia V5 and standard MS office software.
Ft. Walton Beach, FL
32548
Designer
May 2009 - August 2009
Create and modify 3D models and 2D drawings IAW contract
specifications for the Neptune II UAV and Sikorsky CH53K
Internal Cargo Handling System programs. Participate in
SolidWorks and Catia V5 user groups to ensure team
efficiency and best practices used. Software utilized:
Catia V5, SolidWorks Premium 2009, SmarTeam, Omnify and
standard MS office software.
Gulfstream Aerospace Structural Design Engineer
Contract through M. I. T. February 2008 - February 2009
500 Gulfstream Rd. Provide 3D relational design and modification of primary
Savannah, GA 31407 and secondary airframe structure on the G650 program.
Apply functional tolerance and annotation to parts and
assemblies in preparation for release once design is
complete. Participate in Catia V5 user groups to ensure
team efficiency and best practices used. Software
utilized: Catia V5, Enovia LCA and standard MS office
software.
The Boeing Company Structural Catia Designer
Contract through A. T. I. January 2007 - January 2008
499 Boeing Blvd SW 3D design and modification of primary and secondary
Huntsville, AL 35824 airframe structure in model based definition for the
Multi-Mission Maritime Aircraft (MMA) (P8-A). Software
utilized: Catia V5, Enovia LCA, PDM and standard MS office
software.
Aviation Tech. Group, Inc. Structural Catia Designer
July 2006 - December 2006
Contract through A. T. I. 3D design and development of primary and secondary
8001 S. InterPort Blvd., airframe structure as well as systems, avionics and
Ste. 310 electronics installations for the Javelin aircraft
Englewood, CO 80112-5951 program. 3D routing of hydraulic system and A/C lines
throughout aircraft. Software utilized: Catia V5,
Teamcenter PDM system and standard MS office software.
Spirit Aerosystems Technical Product Designer
Contract through CDI January 2006 - July 2006
P.O. Box 780008 Primary and secondary airframe structural design in 3D
Wichita, KS 67278-0008 model based definition of section 41 passenger floor area
on the Boeing 787. Software utilized: Catia V5, Enovia
LCA and standard MS Office software.
The Boeing Company Technical Product Designer
Contract through Quantum May, 2005 - Nov, 2005
Resources 3D design and modification of existing airframe structure
626 Anchors St. as well as new fabricated parts and electronics to be
Fort Walton Beach, FL installed onboard the C-130 Gunship. Develop level 3 2D
32548 assembly, installation and fabrication drawings upon
design completion. Software utilized: Catia V5 and
standard MS Office software.
ATSI (Advanced CAD Designer/Design Specialist
Technologies Systems, July, 2002 - May, 2005
Incorporated) 3D design and modification of primary and secondary
912 N. Ferdon Blvd. airframe structure on military aircraft. Platforms include
Crestview, FL 32539 UH-1, MH-60, M/CH-53 helicopters, V22 Osprey and C-130
Gunship. Assisted during on-site aircraft surveys and
NOTE: ATSI has since been installations as needed. Served as liaison between design
group and production.
acquired by BAE Systems. Prepare level 3 2D drawing package upon design completion.
Work closely with R&D department creating conceptual
design models during initial case studies. Create graphics
for proposals, brochures and the company web site.
Software utilized: SolidWorks 2005 & 2006, AutoCAD 2005,
Photoshop and standard MS Office software.
Micro Systems, Inc. Designer
35 Hill Avenue June, 2000 - July, 2002
Fort Walton Beach, FL 3D design of electro-mechanical packaging for radar and
32548 GPS based ground and airborne drone control systems and
missile tracking beacons. Develop engineering drawings
per contract specifications upon design completion.
Served as liaison between engineering, production and
machine shop throughout the design process as well as
prototype and production run. Create drawings for
proposals, manuals and presentations. Software utilized:
Mechanical Desktop 2004 & 2005, AutoCAD 2000i and standard
MS Office software.
EJM Aerospace Services Aerospace Structural Designer
5614 John Givens Road August, 1995 - June, 2000
Crestview, FL 32539 2D and 3D design for manufacture of primary and secondary
airframe structure and provisions for electronic
components for installation in commercial and military
aircraft. Design of composite structures such as avionics
racks, cabinets and containers. Design of modification
and/or repair to internal and external existing aircraft
structure. Reverse engineering per contract requirements.
Served as liaison between engineering and production when
necessary. Electrical drafting of wiring diagrams and
schematics as needed. Software utilized: AutoCAD 2000 and
standard MS Office software.
Metric Systems, Inc. CAD Operator II
749 Beal Parkway NW June, 1991 - August, 1995
Fort Walton Beach, FL Created detail, assembly and installation drawings from
32547 engineering sketches and input. Revised and edited old
drawings and documents. Created parts lists, wire lists
and other documents as well as maintaining the
department's mechanical library. Software utilized:
AutoCAD and standard MS Office software.
References Available Upon Request
Associate of Science (A.S.)
August, 1995
Design Technology CAD/CAM
Northwest Florida State College
100 College Boulevard
Niceville, FL 32578
DOD Secret Security Clearance
Issued Sept., 2002
Software Experience
8000+ hours of Catia V5
6500+ hours of SolidWorks
5800+ hours of Enovia
1000+ hours of Teamcenter
Contact this candidate