Experienced Mechanical R&D / Engg. Professional[pic]
Result oriented professional with 5+ years of R&D/Engineering and Project
management experience. Strong team, leadership, mentoring, analytical & problem
solving skills along with a sharp business acumen. Energetic individual with a
passion for hands-on engineering, continuous learning & creative thinking while
keeping customer as the focus
Professional Experience
Education[pic] [pic]
Ph.D. (2006) Senior Project Engineer, Sandvik Mining &
Michigan Technological Construction, Houston, TX, Jan 08 - Present
University, USA Skills Utilized: Project Management (MS Project),
System Engineering (MS Visio, FMEA), Dynamic Analysis
B.S. (2002) (LMS Virtual Lab), FEA (Femap 10, Abaqus, NEI Nastran
University Institute of 9.2, Ansys), Data acquisition & analysis (Labview
Technology, India 8.6)
Played a lead role in securing projects worth USD1.5M
Core Strengths[pic] via pitch presentations to internal and external
customers. Managed a global project worth USD200K for
Strong focus on developing a field service offering for drilling
customer-centric & applied application diagnostics while leading 2 direct
R&D along with business reports
acumen Member of a team responsible for drilling and
Experience working with drill-bit systems R&D for rotary drill rigs & for
small and large global troubleshooting application-specific problems via
engineering teams structural analysis, FEA, CFD and testing
Strong project management, Conducted FEED studies, stakeholder analysis, risk
leadership, team and assessments & go/kill analysis, maintained risk
mentoring skills register, gained customer buy-in, conducted review
Ability to multi-task & meetings & completed project documentation
work in a fast-paced Conducted vibration, dynamic modeling & FEA of
environment drilling systems; Structural, thermal, coupled
Ability to deliver thermal-structural analysis, fatigue, creep, modal,
creative & innovative nonlinear & multiphysics analysis; design of
solutions; adapt, structures (top drive, pipehandling, mast,
accelerate & deliver drill-pipes, stabilizers & tool-joints)
according to nature of Led project for fluid flow & thermal analysis of
work downhole tools; modeled effect of wear & corrosion on
Good mixture of fatigue & buckling strength & ensured adherence to
theoretical and applied ASME standards & codes.
expertise in mechanical Conducted lab & field tests using data acquisition
engineering system, sensors; provided on-site support to sales,
Experience with advanced application and field engineers
simulation & testing tools
Senior Analyst, CGN & Associates, Peoria, IL, Jan 07
- Jan 08
Skills Utilized: Project Management (MS Project),
Career Highlights[pic] System Engineering (Team Center, DOE based
optimization, Taguchi's Robust design, QFD, FMEA,
Secured projects worth a P-diagram, Pareto Analysis), FEA (I-DEAS),
total of USD 3.5M Statistical Analysis (Minitab R13)
Awarded high performance
employee recognitions in Responsible for system-level design & fatigue life
2007 and 2009 improvement for Caterpillar's equipment groups (LWL
5+ years experience 988H & 16M Motor grader)
working in collaborative Mapped system-level architecture, functional &
multi-region, technical requirements for machine diagnostics &
cross-functional Taguchi's robust design
environment Applied system engineering techniques for business
Patent filed by Michigan process improvement for John Deere's Service Advisor
Tech. & Endres Machining resulting in savings of USD1M; Analyzed business
Innovations on Ph.D. process data to propose changes & to determine if
dissertation customer requirements are being met;
Awarded MTU Research Lead a team to identify a supplier base with savings
Excellence Assistantship of USD500K.
in 2003 & NSF Research
Assistantship, 2005 Research Engineer, Endres Machining Innovations,
Publications in Houghton, MI, Jun 05 - Dec 06
conferences & Skills Utilized: Project Management (MS Project),
peer-reviewed journals CFD, FEA (Pro-Mechanica, IDEAS, Ansys), Data
Acquisition & Calibration (Labview), Data Analysis
(Matlab 7, Minitab R13), Optimization, Wear Testing,
Certifications & Design of Experiments, Metrology, Turning, Milling,
Trainings[pic] Grinding, Brazing, Superfinishing, Micro-milling
Project Management (PMP Delivered NSF SBIR Phase-I targets within a
Certification, March 2010) competitive timeframe of 8 months. Proved the
feasibility of internal cooling of machine tools
Six Sigma Black Belt while machining Ti & Ni based alloys via CFD and FEA
Certification (Seeking) tools
New Product Development Prepared NSF SBIR Phase 1 & Phase 2 proposals &
Professional Certification project documentation which secured a total of
(Seeking) USD1.1M
Modal Analysis Training Designed bearings and performed structural, thermal
LMS Virtual lab Training FE, dynamic analysis & coupled thermo-fluid analysis;
Femap/Nastran Training Evaluated simulation softwares, data acquisition
Labview Training software & hardware, fixtures & tools
ProE Wildfire Training
Team Lead, M.K. Morse Company, Houghton, MI, Aug 04 -
Dec 05
Graduate Courses[pic] Skills Utilized: Project Management (MS Project), CFD
(CFDesign), FEA (IDEAS, Abaqus, Ansys), Data
Experimental Modal Acquisition & Calibration (Labview), Wear Testing,
analysis DOE, RSM, ANOVA, Circular Saw Cutting, Optical
Finite Element Analysis Microscopy,SEM
Advanced machining
processes & machine Planned, coordinated & executed design & testing
dynamics activities from the conceptual to pilot stages while
Precision manufacturing & leading a team of 3 engineers
metrology and Achieved a 40% improvement in product-life over
Environmentally Japanese market leader leading to successful product
responsible design & commercialization
manufacturing Designed experiments for wear testing, structural &
Advanced quality thermal FEA, setup data acquisition systems and
engineering & Design of analyzed results. Presented R&D results to the
experiments steering committee and provided weekly status updates
Affiliations[pic] Graduate Assistant, Michigan Tech. University,
Houghton, MI, Jan 03 - Aug 04, Jan 05 - Jun 05
ASME, ASQ, PMI, PDMA Evaluated stresses, thermal loads and flow parameters
for developing an internally cooled cutting tool by
using FEA and CFD tools.
Conducted numerical simulations & experimental tests;
reviewed & submitted peer-reviewed papers to three
journals
Conducted three graduate and undergraduate level
courses; reviewed exams and labs; mentored three
graduate students
Research Trainee, RRCAT, Indore, India, Jun 02 - Jan
03
Conducted R&D activities related to rapid prototyping
using CO2 lasers & generated machine codes for
fabrication of impellers.
Computer Skills
[pic]
CAD Packages: Catia V5, ProE Wildfire
Analysis Packages: SDRC I-DEAS Series 9m3/10
including TMG & ESC, Ansys 6.0, Femap 10, NEI
Nastran, CFDesign, LMS Virtual Lab Motion &
Durability, Matlab 7, Visual Basic, Labview, Minitab
Project Management: MS Project, SharePoint,
ProjectPlace