Lijo Kuriakose ***** Richard O Dr,
Sterling Heights,
MI - 48310
E-Mail:
abmbr1@r.postjobfree.com
Phone: 586-***-**** (M)
: 586-***-**** (H)
Objective:
A challenging position in an Embedded System (Automotive) company
where I can utilize my skills and abilities to grow with the company.
Summary Embedded Experience:
o 7 Years of experience in Embedded Systems.
o 5.5+ Years of experience in Automotive Industry which includes Embedded
System Design, Development and Testing
o Expertise in using 'C' and Assembly towards complexity of emerging
automotive systems
o Adept in end-to-end development of Software Lifecycle (Requirement
analysis, Designing, coding, Unit & Integration testing, Functional
testing, de-bugging, documentation and release)
o Communication protocols - SCI,SPI,I2C,CAN
o Software Architecture - CESAR, AUTOSAR, MVC
o Compilers - Metro-werks Code warrior, Keil, MPLAB,Tasking, Fujitsu
o Controllers - Motorola, Atmel, PIC, Fujitsu, ST10, NEC
o Tools - CANalyzer, Tessy, TRACE32
o Version Control Tools - MKS, Wind chill, SVN
o Code Analyzer - QAC (MISRA), PC-Lint
o Vehicle/Field Testing.
o On-site experience (WABCO - Germany)
Professional Experience:
Feb -2010 to Till Date Danlaw, Inc. Farmington Hills Detroit
Designation : Software Engineer
Project : Data Logger
Role : Design, coding, Integration and validation testing
Customer :Allstate, AAA Team
Size : 10
Hardware : AT91SAM7S256
Project Summary:
Data logger is a compact device which can be connect to the OBD-II
connector of the vehicle to get vehicle information like Trip start,Trip
end, Speed, Odo,etc.and send to TCP/FTP/WEB server.It has different
versions of GSM,CDMA with and without GPS.
Aug-2008 to Dec 2009 KPIT Cummins Infosystems Ltd Bangalore,
India
Designation : Team Lead
Project : U38x L3 HMI
Role : Design, coding, Integration and validation testing
Customer : Ford Team Size :
14
Tools : Tasking, Lauterbatch Debugger, QAC
Hardware : NEC D70 F3423
Project Summary:
U38x Instrument Cluster for Four Wheeler: It will help the environment
to realize the effects through Speedo, Tacho, Fuel and Temperature gauges,
Odo, Trip Computer, Fuel Computer, Gear position Indications, Warning
message and telltales through CAN, H/W. My contribution in this project was
the development of Warning and RTT.
Project : L1 transit HMI development
Role : Design, coding, Integration and validation testing
Customer : Ford Team Size :
6
Tools : Tasking, Lauterbatch Debugger, QAC
Hardware : NEC V850
Project Summary:
L1 transit Instrument Cluster for Four Wheeler: Display the Warnings
in the HMI environment. There are three different strategies of warnings
like HARD, SOFT and INFO. When the CAN data received with the warning
message it will be transferred to the application layer (HMI), application
layer detects the Warning ID, strategy and will be displayed in the HMI
Display.
May 2006 to Aug 2008 WABCO-TVS Ltd Chennai,
India
Designation : Software Engineer
Project : ECAS NG (Electronically Controlled Air Suspension)
Component : Active Height Sensor
Role : Team coordination, design, coding, unit and integration
Testing
Customer : Chrysler Team Size
: 4
Tools : Fujitsu, Accemic, QAC, PC-Lint, Tessy
Hardware : MB91467B
Project Summary:
The Active height sensor is a CESAR based software component
consisting of DL_AHS module, HL_AHS module and TL_CAPCOM module. The
component Active Height Sensor should measure the PWM frequency and the ON-
duration and calculate the duty cycle by using the measured values. This
driver controls the Active height sensor hardware interfaces and calculates
the final displacement output in angle (degrees), from the sensor signals.
Any software application (application layer) can use this component to
measure displacement in angle (degrees).Hardware should validates and
reports the Open Circuit, Short to Supply and Short to Ground errors to the
Error manager.
Project : ECAS NG (Electronically Controlled Air Suspension)
Component : Active Load Sensor
Role : Design, coding, unit and integration Testing
Customer : SCANIA
Team Size : 2
Tools : Fujitsu, Accemic, QAC, PC-Lint, Tessy
Hardware : MB91467B
Project Summary:
Axle load sensing is an option of ECAS that gives cargo weight and
load distribution information. It is available on all trailers and tractors
with full air suspension, and also 4x2 tractors with steel/air
suspension. This feature will give the driver an accurate reading for the
vehicle's gross weight and the load on each axle.
Nov 2004 to May 2006 Pricol Ltd
Coimbatore, India
Designation : Engineer (Product Development & Engineering, Electronics)
Project : Vehicle Monitoring System
Role : Design and coding
Customer : Open Market
Tools : Mplab,QAC
Hardware : Microchip 16F877A
Project Summary:
Vehicle Monitoring System is a device that helps to monitor vehicles
and generate reports. Using these reports, the owner can plan the effective
use of his vehicle and improve the performance of the vehicle. Black Box is
fitted in the vehicle for monitoring several parameters like speed, start
of tripe, end of trip, sensor failure, sensor recovery, battery failure,
and battery recovery.
Project : Passenger Information Display
Role : Design and coding
Customer : Ford - (fiesta )
Tools : Metrowerks (compiler),QAC
Hardware : HC908LJ12
Project Summary:
PID is an ultra compact display attached to the dashboard. It displays
ambient temperature, clock, calendar, alarm etc. Settings can be changed
using 2 switches mode and set. Depending on Ignition switch, it has 2 modes
of operation (Sleep and Run). Illumination of LED used for backlighting of
LCD changes to 100% during day and 60% during Night.
July 2003 to Oct 2004 SiED
Cochin, India
Designation : Design Engineer
Project : Industrial Data Acquisition System
Role : Design and coding
Customer : K.R.L Cochin
Tools : Keil (compiler)
Hardware : Atmel 89C51
Project Summary:
This product is used for monitoring several parameters like
temperature, pressure, fluid level etc coming from a boiler plant. The
system is capable of monitoring up to eight analog and eight digital
signals.
Project : Access Control System
Role : Design and coding
Customer : Popular InfoTech.
Tools : Keil (compiler)
Hardware : Atmel 89C51
Project Summary:
Implemented in storeroom security system. For more security the system
should afford double protection for opening any particular door. For that
every authorized person should keep one code generating electronic key, IR
transmitter and password. Everyone keep unique key and password.
Education
Education University/Institution Year Of Passing
MS (Software Birla Institute of Technology 2006 - 2008
Systems) & Science, Pilani.
Master Degree 2001 - 2003
(Computer Bharathiyar University
Science)
Bachelor Degree 1998 - 2001
(Electronics) M.G University
Work Status
Green Card Holder (Permanent Resident)