Engineer Manager

Vincent Alioto

*** **** ** ****** **** Suit #**, Mountain View CA, 94040

415-***-**** abm81z@r.postjobfree.com

[pic]

OBJECTIVE: Challenging technical career as a CAD Engineer in Advanced

Technology R&D or Military R&D.

EDUCATION: -Aerospace Engineering (Bachelors of Science) San Jose State

University: (2003-09)

Award for Academic Excellence in Aircraft Design. Major GPA:

3.1

-Mechanical Engineering (Masters of Science) San Jose

State University: GPA 3.0, Graduation Date: 2011

CERTIFICATIONS: - Beginning Geometric Dimensioning and Tolerances, William

Tandler of Multi Metrics Inc. Based on ASME Y14.5M 1994

Standards (4/09)

-Analytical Graphics Inc: Satellite Tool Kit V9 Comprehensive

Training, Paul L. Graziani: CEO of A.G.I. (6/09)

- National Instruments: Basics of LabVIEW & Data Acquisition,

Brian Armstrong: NI LabVIEW Academy Manager (8/09)

CAD SOFTWARE: Pro/Engineer WildFire 4.0 (1000 hrs+),Windchill PDMLink and

Pro/Intralink, CATIA v5 and v6 (1000 hrs+), Solid Works,

Autodesk Inventor, Mechanica, AutoCAD 2009

ENGINEERING SOFTWARE: National Instruments: LabView, Microsoft Office

Suite, Satellite Tool Kit V8 and V9, C and C++, Mat Lab,

FileMaker Pro, Maplesoft, Advanced Aircraft Analysis, X-

Foil.

C.F.D. SOFTWARE: Sub 2D, ESI Group CFD Package (Geom, ACE), GridPro V4.5

and V5.1, FASTRAN

OPERATING SYSTEMS: Windows and Apple OS X

LEADERSHIP: -President SJSU Adv. Aircraft Research Design & Construction

Team (2007 - 2010)

Achievements: Increase membership by 50%, Team manager of M-

Class Arliss rocket design build fly. Networking with Lockheed

Martin University Relations, Beeline GPS, Rouse-Tech, and RCS

Rocket Motor Comp for rocket building supplies and mentoring,

Construction of Spartan Rocket and ATDAV Glider, Report paper

published by AIAA.

-Vice President of American Institute of

Aeronautics and Astronautics San Jose Chapter (1/08 - 9/08)

Achievements: Increase membership by 200%, Resume workshop with

Lockheed Martin, SJSU rocket building seminar and BBQ open to

college and high school students, Organized NASA Ames Simulator

division tour. Organized Aerospace department booth and water

tunnel presentation for SJSU open house.

-Financial Officer: AIAA San Jose State Chapter (9/08 - 6/09)

Book keeping, funding and fundraising management, event

management increase funding by 80%.

-Historian: AIAA SJSU Chapter (8/09-Present)

(www.engr.sjsu.edu/aiaa)

Project documentation, event coordination, website maintenance,

PowerPoint slideshows of activities

EXPERIENCE: -Intern for Boynton Construction: Jerry Boynton Los Altos

Hills, CA (6/09- 1/10)

CAD drafting on Pro E including pipes and electrical, framing,

wiring, dimensioning, concrete and renovations.

-Apprentice for Griffin Cabinets: Brian Griffin,

Belmont, CA (6/09- 1/10)

CAD drafting, machine shop operations, dimensioning, custom

fabrication, finish work, tooling, installation.

-Wireless database Manager for Oracle Technology

Network: Red Wood City, CA(1/08-5/09)

Employee technical support, maintenance and optimization, Uploading

and updating database. Reports and documentation.

-Shift Manager for Starbucks Park Center Plaza: San Jose CA

(6/05 - 2/08)

Closing store, cashier, finance management, ordering, reduced

costs by 18%

-Clerical Intern for UCSF School of Nursing: (Volunteer) San

Francisco CA (9/00-5/04)

Data retrieval, computer database entry and management,

receptionist, customer service, medical clerk

-Marin County high school outreach (Volunteer) (8/06 - 1/07)

Motivational speaker and mentor to expelled high school students

and aid in college enrollment (60% enrolled in SJSU)

RELEVANT COURSES: -Aerodynamics -Aerospace Structures

-Comprehensive Satellite Tool Kit

-Fluid Mechanics -Computational Fluid Dynamics

-Aerospace Vehicle Dynamics & Controls

-Compressible Flow -Computer Graphics & Design

-GD&T for Design Mfr. & Inspection

-Propulsion Systems -Mechanics of Materials -

ProEngineer CAD

-Thermodynamics -Public Speaking

-Finite Element Analysis

-Rigid Body Dynamics -Aerospace Flight Mechanics

-Aircraft & Spacecraft Design

-Composite Mtrls. Props. & Manufacturing -NxRev

Fundamentals of Windchill

GRAD COURSES: -Advanced Aerodynamics -Advanced C.F.D.

Advanced Space Propulsion Systems

PROJECTS:

-Arliss Rocket: (Team Manager, CAD Designer, Financial coordinator,

Integrations) Dr. Periklis Papadopoulos SJSU

(5/09 - Present)

Design and construction of an 11ft tall M-class Arliss Rocket with an

outer diameter of 6.5 inches. Flies to 30k ft, breaks into 3 sections

and returns via parachutes. Coordination and integrated with a CubSat

Satellite and weather balloon designed for Mars landing into the

payload section. CAD design and finite element analysis using Pro

Engineer Wildfire 4.0.

- Arliss Comeback Competition: (3D Design, Researcher, Technical

Writer, Manager) Advisor: Dr. Nikos Mourtos SJSU (5/08 - 6/09)

Design and construction of a rocket which flies to 10k ft, jettisons a

glider which deploys inflatable wings and autonomously navigates

towards a predetermined landing site. Construction of composite test

wings and fuselage. Integrated control surfaces, team management,

research similar projects. CAD designer using Catia V5 and Pro

Engineer 4.0. Presented project at AIAA Region VI Student Conference

09, Awarded 3rd place in Group Design Project. (www.ATDAV.org)

- Pro Engineer Piping and Welding Seminar: (Technical Writer and CAD

Designer) Prof. Edwardo Chan SJSU

(2/08 - 5/09)

Creation of tutorial on piping and welding methods in Wildfire Pro

Engineer V4. PowerPoint point presentation including instructional

examples of piping and welding using Pro/E. Wrote 12 page instruction

guide including screen shots and detailed, step-by-step instructions.

Created 6 Pro E parts requiring piping or welding completion for

students to practice. Now integrated into SJSU-Pro E introduction

course.

-Rocket Design using Pro Engineer: (CAD Designer) Prof. Edwardo

Chan SJSU

(25/09-05/09)

Design of M-class Arliss Rocket using Pro Engineer. Assembly

comprised of 35 parts. Finite Element Analysis performed using Pro

Engineer and Geometric Dimensioning and Tolerances. Computational

Fluid Dynamics preformed using ESI-Geom and ACE. CAD assembly

available on request.

- 3 Axis Satellite/Aircraft Simulator: (CAD Designer and Manager) Dr.

Periklis Papadopoulos SJSU

(1/08 - 08/08)

Mechanizes frame with rotating rings which simulate roll, pitch and

yaw of a flight simulator. CAD design using Catia V5 and Pro E, finite

element analysis using Pro E Mechanica and geometric dimensioning and

tolerances, mechanized assembly and motor testing. Integrated into

"Interactive Classroom" project of Stanford

- Computational Fluid Dynamics on Inflatable Re-entry vehicle: (CAD

Designer, CFD Analysis ) Dr. P. Papadopoulos

(01/09 - 6/09)

Research on NASA inflatable re-entry vehicle, 3d CAD drawing developed

in CATIA V5. Surface meshing with CATIA V5, and refined using CADFix.

Geometry imported into GridPro and 3d grid developed. Grid imported

into ESI Fastran for re-entry conditions and simulations run using

various altitudes and angles of attack, and velocities.

-Design of LabView Boundary Layer Program: (Programmer) Dr. Nikos

Mourtos

(01/09 - 6/09)

Development of a Labview VI program which would record pressure data

from a wind tunnel at SJSU, plotted a solution of both the laminar and

turbulent boundary layers over a flat plate, and compared to Blasius

solution. Program now integrated into Aerodynamics lab at SJSU.

-Design of LabView Aerospace Structures Lab Program: (Programmer)

Dr. Jeanine Hunter

(6/09 - Present)

Creation of LabView program to be used in Aerospace Structures Lab at

SJSU. Measures changes in voltage across a strip of wire on a

cantilever and converts into strain measurements on a graph once a

load is applied. Similar program made of a torsion experiment, and

wing lift distribution experiment.

-Hybrid Rocket Propelled Satellite: (CAD, Nozzle, and Propulsion

System Designer) Dr. N. Djordjevich: Lockheed Martin

(01/09 - 6/09)

Design of a Hybrid rocket propulsion system for lunar satellite.

Research of Hybrid rocket systems, design and calculation of nozzle,

nitrous oxide and HTPB fuel tanks, coolant system and telemetry

system. CAD drawing performed in Catia V5 and Pro-E. Simulations run

in Satellite Tool Kit V9.

-Incursion Reconnaissance Drone: (Silent Propulsion Designer) Dr.

John Lee SJSU

(08/08 - 12/08)

CAD Design using Pro E and construction of an indoors silent

reconnaissance drone. Assembly includes 45 parts. Aircraft design,

sound testing and modification of multiple engine system to determine

which would be optimal for an indoor S.W.A.T. stealth drone. Design

and implementation of decibel measurement testing. Propulsions and

control system fully functional.

- Airfoil Manufacturing Equipment: (Designer and Fabrication) Dr. Nikos

Mourtos

(08/08 - 01/09)

Fabrication of a hot wire bow which uses an electric current to cut

foam into rectangular wings using wooden airfoil templates. Wrote the

instruction manual for the bow for proper fiber glassing techniques.

Now integrated into Aircraft Design Capstone course at SJSU.

Contact this candidate