Project Control
Resume:
MUSTAFA AL-SAEDI
abljo4@r.postjobfree.com
*** ********* **. *******-** 32809
Cell: 407-***-****
SUMMARY
Commissioning and maintenance engineer 8 years of experience in designed, modification,
installation, maintenance & commissioning. Proficient in Microsoft Word/Excel/Outlook, Windows
3.1 through Windows XP
Professional Experience COMMUNICTION 2008
Company: ASLLC sub contract WINTARA .
Project: Remote Monitor System (RMS) connecting the GAS TURBINE STATION in
one monitoring place at Baghdad south
Type of work:
• Install all the site equipment (2 servers,transmitter,receiver and antenna
• Install and connect with the controller and download all the file on the HMIs
• Training the MOE on using and maintain this system
Generation 2007-2008
Company: GRD/IPA .
Project: Commissioning and Operate mussibe gas turbine for 10UNITS type LM6000 GE
manufacture with RO unit and refinery
Type of work:
• Calibrate and test all transmitter,pressure switches,level switches, temperature
switches and all gauge
• Install all the software for MK 6 controller,GEFANUC and HMI s
• Install fiber optic cable for communication between the units
Operating and maintenance 2006-2007
Company: WGI, Inc . Project: Rehabilitation of instrument in taza gas turbine station
unit one(64)unit tow
(94) manufacture by SIEMENS
Type of work:
• Calibrate and test transmitter SITRANS P and SITRANS T manufacture by
SIEMENS
• Calibrate and test pressure gauge and temperature gauge
• Training for instrument department at taza gas turbine station (OJT) on job training
• Design the matching drawings between the old GIS 400kv and new protection and
control system (ABB)
• Design the matching drawings between the old disconnect switch and new protection
and control system (ABB)
Testing and commissioning 2006
Company: WGI, Inc .
Project: Commissioning agrguf 132kv /33kv substation, 7 bays 132kv manufacture
(ALSTOM & SIEMENS) type AIS, the protection and control system manufacture
(SIEMENS) and 20 bays 33kv manufacture (ALSTOM)
Type of work:
• Testin g circuit breakers for all bays, the tests are CB timing analyzer, contact
resistance, PF test and function test
• Testin g disconnect switches for all bays, the tests are, contact resistance and
function test
• Testin g and calibrate the protection relays siemens
• Commissioning and test all 33kv circuit breaker
• Commissioning and operating all bays and lines
Testing and commissioning 2006
Company: WGI, Inc Project: Rehabilitation center C.B of diameter 3 in west
Baghdad substation 400 KV, 2000A
Type of work:
• Design the matching drawings between the new CB (ABB) and old protection and
control system (ASEA)
• Testin g all parts of line (Circuit breaker, CTs).
• Testing and commissioning circuit breaker 400KV, 2000A (ABB)
• Commissioning and operating t he center C.B
Testing and commissioning 2006
Company: WGI, Inc .
Project: A L KALIS 400/132 kV GIS manufacture by ASEA, 4 diameter 10 bays
Type of work:
Commissioning and operating t he bays
•
Testing and commissioning 2006
Company: WGI, Inc Project: Rehabilitation of diameter 3 in west
Baghdad substation 400 KV, 2000A
Type of work:
• Design the matching drawings between the new CB (Siemens 3AP2-F1) and new
p rotection and control system (SIEMENS)
• Design the matching drawings between the old disconnect switch and new
p rotection and control system (SIEMENS)
• Testin g all parts of line (Circuit breaker, CTs, PTs, Surge arrestor, Disconnect
switch, earthing switch).
• Testing and commissioning circuit breaker 400KV, 2000A (Siemens 3AP1F6)
• Commissioning and operating t he lines
• Calibrate the protection relay (SIEMENS)
Testing and commissioning 2006
Company: TDS, Inc .
Project: Construct indoor and space-saving gas-insulated switchgears (132 KV GIS)
manufacturing by VATECH type TH7m which consist of ten bays three transformer
bays, six line bays, two bus bar and bus coupler bay
Type of work:
• Testin g circuit breakers for all bays (VATECH D TH7m), the tests are CB timing
analyzer, contact resistance, dielectric and function test
• Testin g disconnect switches for all bays (VATECH SI TH7m), the tests are
t iming, contact resistance, dielectric and function test
• Testin g earthing switches for all bays (VATEH STL TH7m), the tests are timing,
Testing and commissioning function test 2006
contact resistance, dielectric and
• Testing GI, Inc . Project: Rehabilitation of ratio,ABU GRAB2, ABU GRAB3 in
CTs and PTs, the tests are turn Bay polarity, insulation and excitation
Company: W
West Baghdadfor CT
saturation substation 132 KV, 2000A
• Commissioning and operating t he line
Type of work:
• Design the matching drawings between the new CB (Siemens
3AP1F6) and new protection and control system (SIEMENS)
• Testin g all parts of line (Circuit breaker, CTs, PTs, Surge
arrestor, Disconnect switch, earthing switch).
• Testing and commissioning circuit breaker 132KV, 2000A (Siemens 3AP1F6)
• Testing of all Power & control cables.
• Testin g all parts of line (Circuit breaker, CTs, PTs, Surge
arrestor, Disconnect switch, earthing switch).
• Testing and commissioning circuit breaker 132KV, 2000A (Siemens 3AP1F6)
• Testing of all Power & control cables.
Commissioning and operating t he line
•
Testing and commissioning 2006
Company: TDS, Inc . Project: Rehabilitation of diameter 1 in East
Baghdad substation 400 KV, 2000A
Type of work:
• Design the matching drawings between the new CB (Siemens 3AP2-F1) and old
p rotection and control system (ASEA)
• Design the matching drawings between the new disconnect switch (HAPAM motor
d rive type EAF) and old protection and control system (ASEA)
• Testin g all parts of line (Circuit breaker CTs, PTs, Surge arrestor, Disconnect
switch, earthing switch).
• Testing and commissioning circuit breaker 400KV, 2000A (Siemens 3AP1F6)
• Commissioning and operating t he ten bays
Testing and commissioning 2006
Company: TDS, Inc . Project: Rehabilitation of Bay Farabi 2 in East
Baghdad substation ML8 132 KV, 2000A
Type of work:
• Design the matching drawings between the new CB (Siemens 3AP1F6) and
old protection and control system (ASEA)
1999-2000
Ministry of higher education Baghdad, Iraq
Design and development of control system and machine control by computer
Instilling of control system and wiring and control machine by computer
Reverse engineering
Reconstruction, Instillation& commissioning 75kva UPS unit 1 at AL-Mussaib Thermal
Power Station
EDUCATION 1996-2000
B.SC University of Baghdad College of engineering electrical department
engineering
Al-khazin Center 2000- 2005
Commissioning 2003- 2005 Design and development many electronic card as DC
drive, UPS, AVR and CHRGER
Baji gas station Baji, Iraq 2004- 2005
Maintenance of UPS in Baji Electric Power station
Maintenance of (6.6KV, 11KV, 33KV switchgear C.B)
Najif gas Power Station Najif, Iraq 1/2004 – 7/2004
Maintenance of CHARGER in AL-Najif Electric power station
Mussaib electric power Station Mussaib, Iraq 2000 –2003
Maintenance of AVR in AL-Mussaib Electric power station for all units
Maintenance of UPS in AL-Mussaib Electric power station for all unit
Al- Numania camp kut, Iraq
Establish of six (1.75MW Generator) as small station in kut
Contact this candidate