Power Plant Electrical
Resume:
PROFESSIONAL RESUME
of
MICHAEL A. MOORE SR.
Permanent Address:
Midland, TX. 79707
Temporary Address:
Belton, Mo. 64012
Telephone: Cell : 940-***-****
E-Mail:
Home: mailto:abl46c@r.postjobfree.com
MICHAEL A. MOORE Sr.
CLASSIFICATION: PRINCIPLE INSTRUMENTATION / ELECTRICAL
DESIGNER/CADD/TECHNICAL WRITER
SUMMARY OF EXPERIENCE
Thirty-four years experience with industrial instrumentation and
electrical systems, Twenty-Three of which are design related, twenty
years Distributive Control System (DCS) experience and one and one
half years procedure writing. Two years college completed toward an
Electrical Engineering degree at Lamar University. Graduate of the
U.S. Navy Nuclear Power Program as a Nuclear Qualified Electrician
(N.E.C. 3354), formally assigned to the Fleet Ballistic Submarine
U.S.S Daniel Webster, S.S.B.N. 626. Nine years experience in
Commercial Nuclear Power Plants. Preformed check-out and start-up on
various Nuclear Power plant systems. Experience has been obtained in
the preparation of Nuclear Technical Specification I&C Surveillance,
Nuclear Electrical, and Nuclear Operations Procedures and Clean Room
Sequence Of Operations Procedures for Clean Room systems which were
written using Microsoft Word. Recent assignments have involved
electrical and instrumentation designs using INTOOLs associated with
chemical plant/refinery environments utilizing CADD Microstation V8 or
Autodesk AUTOCADD 2008. Employment circumstances have provided
extensive opportunities to layout, and design instrumentation, as well
as, electrical systems by various manufacturers and in varied process
applications. Microsoft Visio was used for simplified logic diagrams.
Microsoft Projects and Microsoft Excel were used on various projects
as a planning and project management tool.
EMPLOYMENT EXPERIENCE
7/2008- 1/2010 Aspen Technical Staffing, Inc., Senior I/E
Designer/CADD
Burns & McDonnell Engineering - Kansas City, Mo.
Performed design and verification of the cable tray systems for two
large scale Ethanol Production facilities. Assignment included the
review and markup of completed designs, verification of tray loading
requirements and the management of the cable routing database.
Preformed instrument design on a Benzene Reduction Unit in Louisiana,
and electric design on a ULSD Benzene Splitter in Wisconsin. Ensured
the complete systems met the requirements associated with N.E.C.
mandates and I.E.E.E. standards.
3/2008- 7/2008 STSI, Inc., Senior I/E Designer/CADD
C&I Engineering - Louisville, Ky.
Performed all aspects of Instrumentation and Electrical Design.
Performed design for various electrical systems from UPS backup
systems, 120 VAC control circuits, 480VAC switchgear, 4160 VAC motor
controls and major plant switchgear systems. Performed system
interface and P&ID corrections/updates. Created instrument loops,
junction box wiring diagrams, 480VAC motor circuits, and Electrical
one-lines to meet the requirements associated with N.E.C. mandates and
I.E.E.E. standards.
EMPLOYMENT EXPERIENCE (Continued)
7/2007- 3/2008 EngGlobal Engineering Inc., Senior I/E Designer/CADD
BASF Chemical Plant - Freeport, Tx.
Performed all aspects of Instrumentation and Electrical Design.
INTOOLs was used for instrument loop configurations, instrument data
management and control systems design assistance. Performed design for
various electrical systems from UPS backup systems, 120 VAC control
circuits, 480VAC switchgear, 4160 VAC motor controls and major plant
switchgear systems.
7/2006- 7/2007 Engineering Service Professionals, Senior I/E
Designer/CADD
BCCK Engineering, Inc. - Midland, TX.
Performed all aspects of Instrumentation and Electrical Design.
Performed new construction design for various Patented Gas Extrusion
systems. Created Microsoft EXCEL spreadsheets for the loading of
instrument junction boxes from P&ID's. Performed system interface and
P&ID corrections/updates. Directed others in the creation of
instrument loops, junction box wiring diagrams, 480VAC motor circuits,
and Electrical one-lines to meet the requirements associated with
N.E.C. mandates and I.E.E.E. standards.
6/2005- 7/2006 Taylor Technical Services Inc. Principal I/E
Designer/CADD
VECO Alaska, Inc. - Anchorage, Ak
Performed all aspects of Instrumentation Design. Performed new
construction design to various existing North Slope systems. Performed
system interface and P&ID corrections/updates. Directed others in the
creation of instrument loops, junction box wiring diagrams.
6/2002- 5/2005 EngGlobal/Petrocon Engineering Inc., Senior I/E
Designer/CADD
Exxon/Mobil Refining - Beaumont, Tx.
Performed all aspects of Instrumentation and Electrical Design.
Coordinated with the assigned engineer for competitive bidding,
selection, and purchasing of required system components. Performed
design tie-ins to various plant Honeywell DCS and Triconex systems.
Assisted with checkout and startup of new systems installations.
Performed material and construction estimations and material takeoffs.
Created Microsoft EXCEL spreadsheets for the loading of instrument
junction boxes from P&ID's. Performed system interface and P&ID
corrections/updates. Directed others in the creation of instrument
loops, junction box wiring diagrams, 480VAC motor circuits, and
Electrical one-lines to meet the requirements associated with N.E.C.
mandates and I.E.E.E. standards.
1/2002- 5/2002 Linde Construction. - I/E Inspector
Mitchell Gas Services - Bridgeport, Tx
Electrical and Instrument systems installation inspection for a Solar
Compressor and associated waste heat recovery systems new
construction. Met the requirements associated with N.E.C. mandates and
I.E.E.E. standards.
EMPLOYMENT EXPERIENCE (Continued)
3/2000-11/2001 M+W Zander U.S. Operations, Inc. - Principle I/E
Designer/CADD, Plano, Tx.
ATMEL - FAB 10 Cold Shell
Electrical systems design coordination, and technical electrical
design on the ATMEL Colorado Springs, CO. 300 mm FAB facility cold
shell. Detail design and review of electrical packages for FAB 12.47KV
feeders, electrical switchgear location and other clean room
environment electrical systems required for cold shell construction.
Texas Instruments DMOS 6 Buildout - Dallas, Tx.
Instrumentation systems design coordination, field support, and
technical support of instrumentation contractors on the DMOS6 300 mm
buildout. Detail design review of instrumentation packages for chill
water systems, VLF fans, various liquid systems, and other clean room
environment control systems.
Technical Writer for various documents for several systems thoughout
the DMOS 6 FAB using MS Visio.
5/1999-3/2000 Aerotek Contract Eng. Services, Inc. -
Instrumentation Designer/Technical Writer, Bedford, Tx.
General Electric - TEAM Controls - Texas Instruments - DMOS 4 Refit
Instrumentation systems design, field support, and procurement of
instrumentation on the DMOS4 200 mm upgrade. Detail design of packages
for hot cutover of operating chill water systems. Research and package
preparation of packages for the demolition of obsolete/inactive
instrumentation loops on chiller systems, VLF systems, and FAB support
systems. Technical Writer for various documents for a multitude of
systems though out the DMOS 4 FAB.
12/1995-4/1999 Fluor Daniel Engineering, Inc. - Principal I/E
Designer/CADD, Sugarland, Tx.
Multi Projects Group - NAFTA Terminal Project
Electrical Design on Lithuania Oil Terminal Project
E.I. DuPont de Nemours -Victoria Works / Sabine River Works
Responsible for creating and updating all required drawings for plant
instrumentation systems, interfacing with the plant Bailey DCS system,
and CADD drafting of electrical/instrumentation drawings as required
on assigned projects.
12/1993-12/1995 CDI - Stubbs Overbeck Engineering, Inc., Beaumont,
Tx. - Senior I/E Designer/CADD
Bayer Synthetic Rubber Plant, Orange, Tx.
Performed all aspects of Instrumentation and Electrical Design.
Performed design tie-ins to various plant Honeywell DCS systems.
Assisted with checkout and startup of new systems installations.
Performed material and construction estimations and material takeoffs.
EMPLOYMENT EXPERIENCE (Continued)
Quantum - High Density Polyethylene Unit
Created, updated, and revised drawings for various changes to DCS
systems in the unit.
3/1992- 12/1993 CDI - Stubbs Overbeck Engineering, Inc., Beaumont,
Tx. - Senior I/E Designer/CADD
Petrocon Engineering, Inc., Beaumont, Tx. - Senior I/E
Designer/CADD
Texaco Chemical - Light Olefins Unit, "H" Heater Installation
Performed drawing updates/revisions, as the project required, to
correct for field changes. Responsible for creating and updating
P&ID's, wiring and instrumentation diagrams, and drafting of
electrical/instrumentation drawings.
1/1990- 3/1992 Petrocon Engineering, Inc., Beaumont, Tx. -
Senior I/E Designer/CADD
E.I. DuPont de Nemours -Beaumont Works
Responsible for creating and updating P&ID's, DCS systems tie-ins,
wiring and instrumentation diagrams, and drafting of
electrical/instrumentation drawings on DuPont projects:
Mobil Chemical - Environmental Compliance Project
In-house assignment updating P&ID'S, DCS systems tie-ins, drafting new
wiring diagrams, and electrical/instrumentation drawings for Mobil
Chemical project.
Star Enterprise - Waste Water Task Force
Performed preliminary design of both electrical and instrumentation
systems for the Waste Water Task Force. Designed DCS systems tie-ins,
cabinet layouts, control logic evaluation, wire and conduit sizing,
power requirement criteria, conduit routing, equipment location plans,
environmental enclosure sizing, as well as, all other design
considerations to satisfy EPA mandated waste water and storm water
control and clean-up.
Texaco Chemical-Valve Metering Site
Performed design changes to existing Remote Controlled Valve Metering
Sites. Designed Modicon PLC installation, DCS systems tie-ins,
cabinet layouts, control logic evaluation, wire and conduit sizing,
power requirement criteria, as well as, all other design
considerations to upgrade existing product metering skids.
1981 - 1989 Nuclear Power Plant Assignments
1989 - Diablo Canyon Nuclear Power Plant - Field Engineer
Assigned to general construction, performing walk-downs and field
design changes of instrumentation assisted in the checkout and startup
of recalibrated primary and secondary systems. Assisted in the
calculation of Reactor trip set-points and progression of Reactor
shutdown systems sequencing.
EMPLOYMENT EXPERIENCE (Continued)
1989 - South Texas Nuclear Generating Station - Field Design Engineer
Work assignments included but were not limited to nuclear sampling,
feedwater control, and other primary and secondary systems. Assisted
in the calculation of Reactor trip setpoints and progression of
Reactor and steam turbine shutdown systems sequencing.
1989 - River Bend Nuclear Power Station - Instrument Designer
Assisted in the E.Q. upgrade of Containment HVAC systems and other
primary and secondary systems.
1988 - Rancho Seco Nuclear Power Plant - Field Design Engineer
Assigned to the radiation monitoring upgrade group and finally to the
instrumentation group performing field design changes of radiation
monitoring equipment, and various other systems. Assisted plant
personnel in the evaluation of intermittent Safety Related
instrumentation systems spurious alarms related to the uncontrolled
rapid cool-down on various Primary Reactor Systems.
1987 - Crystal River 3 Nuclear Power Station - Instrument Designer
Assigned to the instrumentation and electrical design group. Assisted
in the design changes of secondary (BOP) systems.
1985 - Diablo Canyon Nuclear Power Plant - Field Design Engineer
Assigned to general construction, performing design alterations of
Safety related and non-Safety related instrumentation systems
associated with Westinghouse 7100 Process Computer.
1985 - 1986 - Nine Mile II Nuclear Power Plant - Technical
Specification Procedure Writer
Procedures written included I&C Maintenance, Electrical Maintenance,
and Operations Systems.
1985 - Diablo Canyon Nuclear Power Plant - Nuclear Instrumentation and
Control Technician
Assigned to nuclear plant operations design alteration group, Unit II.
Changed field design on instrumentation associated with Westinghouse
7100 Process Computer and various other primary and secondary systems.
1984 - Commanche Peak Nuclear Plant - Nuclear Instrumentation and
Control Technician
Assigned to the N.S.S.S. Design group, working with the Westinghouse
7300 Process Computer, General Atomics Radiation Monitors, and various
other primary instrumentation.
1982 - 1984 - Callaway Nuclear Power Plant - Nuclear Instrumentation
and Control Technician
Check-out and start-up on the following systems: Turbine Supervisory
Instrumentation, Westinghouse 7300 Process Computer, and various
Turbine Support Systems.
1981 - 1982 - J.H. Farlay Nuclear Plant - Nuclear Instrumentation and
Control Technician
Work assignments included, but were not restricted to; Turbine
Supervisory Instrumentation, Westinghouse 7300 Process Computer,
Nuclear Sampling System, Feed Pump Control, Radiation Monitoring, and
various other primary and secondary systems.
1975 - 1978 - United States Navy - Nuclear Qualified Electrical
Technician/Operator
Rank involved providing direction and technical assistance to others
for the maintenance and operation of Naval Nuclear Reactors and
support systems.
EDUCATION
Lamar University, Beaumont, Texas
Majoring in Electrical Engineering, 1980 - 1981, 1991-1992
Spur High School, Spur, Texas
Graduate 1974 - Concentrating in Mathematics and Physics
U.S. Nuclear Power Program
Graduate 1976 - Navy Enlisted Code 3354
TECHNICAL TRAINING
E. I. DuPont de Nemours, Beaumont, Texas:
Intergraph Microstation
Petrocon Engineering Inc.
Autodesk AutoCADD
United States Navy Nuclear Power Program:
Three years accelerated advanced training.
Qualified Second Class Nuclear Electrician/Operator
United States Navy Basic Electricity and Electronics School:
Electron flow through Amplifier Theory, Systems testing,
Trouble shooting and Repair.
United States Navy Electricians Mate A School:
AC and DC Electrical Systems, Motor Control, Motor Theory
Generator Control, and Generator Theory.
United States Navy Submarine Storage Battery School:
Construction Technics, Maintenance, and Limits
of Nuclear Submarine Storage Batteries.
United States Navy Nuclear Power School:
Advanced studies of U.S. Nuclear Power systems, including but
not limited to:
Reactor Physics, Reactor Kinetics, Steam Plant Systems,
Radiation Detection Systems,
Heat Transfer and Fluid Flow, and Radiation Health Physics.
United States Navy Submarine Magnetic Amplifier School:
Design, Construction, Operation, and Uses for
Magnetic Control Amplifiers in the Submarine
Environment.
Contact this candidate