Vincent Barger

**** ** ******** ***.

Port Saint Lucie, FL 34952

772-***-****

abl1gl@r.postjobfree.com Over 20 Years Experience

Quality Assurance Manager

Profile

Certified Six Sigma Black Belt / Quality Systems Design &

Implementation / Organizational Lean Flow structured development /

OE/Construction Management

Fast track professional successful in the design, development and deployment

of Quality systems operational interface strategies and policy. Experienced

leading an organizational introduction to six sigma methodology with lean

flow management including cost analysis, time study, planning, vendor

selection, and operational flow placement procedure and displacement strategy.

Diverse background includes extensive knowledge of quality and its

infrastructure, construction and construction management and the ability to

lead projects to enhanced performance, profitability outputs, and customer

satisfaction

Career History

ALSTOM POWER SYSTEMS

Turbo Machines Group

100 Gateway Centre Parkway. Richmond VA, 23235

Supervisor: Rob Leach/Project Manager Tel: 804-***-****

Project: Exelon, 1000MW Inner Casings for Quad Cities Unit 2 Nuclear Retrofit

Major Multi Million Dollar project.

JOB TITLE: PROJECT QUALITY SUPERVISOR JULY 09 TO MARCH 09

Project Scope: Respond to customer requirements to provide onsite vendor quality

assurance and quality control management

• Alstom Oversight Quality Supervisor at G&G Steel Russellville, AL

• Insure Quality Procedures’ are followed in accordance to nuclear related fabrication

& welding standards.( WPS & PQR) NDE LEVEL II,

• Site quality supervisor in charge of project quality inspections and review

• Review welding procedures and welding processes to insure all welding codes

applicable to the project requirements are being followed (ASME, AWS)

• Notify Business unit of current in process schedule and validate timelines.

• Review Inspection Test Plan (IT&P) to coordinate expert witness.

• Review NCR’S and CAR requirement stated in the P.O. / Procedure

• Assist in the communication between the customer and the business units involved,

i.e. Language barriers, Business units involved from 3 different countries as well as

project managers, Product qualification, Documentation

• Insure the Quality Assurance Plan (QAP) is being followed in accordance with

specific requirements.

• Document findings and daily reporting to management on status of project.

ALSTOM

POWER SERVICE Boiler and Environmental Plant Services (Midwest

Service Center) Pulverized Products, Environmental Discharge

1500 Jamike Ave. Erlanger, KY 41018

Michael R Baker General Manager Phone # 859-***-****

Alstom is a global leader in equipment and services for power generation and rail transport.

The group is present in more than 70 countries worldwide and employs over 65,000 people.

42 Billion In US Sales

JOB TITLE: PROJECT MANAGER /QUALITY SPECIALIST Dec07 to July 09

Project Scope: Corrections to findings from a quality audit conducted by corporate

• Manage several projects that directly affect quality in the power generation sector.

• Review manufacturing and fabrication sector for process improvement design

• CIP Project Lead / R&D Cell Development –Product Design

• Welding program : Review current welding program processes

• Identify disconnects between the process and the quality manual procedure

• Coordinate quality welding procedures to conform to AWS D1.1 Standards.

• Material Control: Review current procedures and process

• Fabrication: Map & Define current process and deficiencies

• Formulate new process and procedures through a lean manufacturing approach.

• Coordinate with management of key areas to have control measures inserted into

the current process.

• Track the rework process through a COPQ system approach

• Mentor and train a field engineer, and co op engineer in the quality systems

mapping process

• Six Sigma and lean flow process consulting.

IQC International Quality Consultants, 106 Freeport Rd Butler, PA 16002

Contract Employment: Customer

Veolia Water: Division NAWS Caribbean, Christiansted USVI ST Croix

(Customer HOVENSA formerly HESS OIL) Location: US Virgin Islands

Largest Oil Refinery in the World (Over 500,000 BPD)

Job title: Project Quality Consultant Date: Aug 07 – NOV 07

A 90 Million Dollar Capital Project AWWTP2 (Advanced Waste Water

Treatment Plant Phase 2)

Project scope: to work with the general contractor, as a part of the management team in

charge of documentation for sell off to the customer.

Insure quality on site

•

Develop quality turnover systems and packages

•

Review Documentation presented by contractors

•

Assemble quality documentation in each discipline

•

Create quality procedures for contractors

•

Comply to federal regulations (EPA)

•

Track NCR’S

•

Issue and resolve Corrective Action Reports

•

Sell off systems operations to client

•

MOC Documentation

•

PSSR Review

•

Daily Meetings and agenda

•

Weekly reporting

•

Scheduling and deadlines

•

Coordinate with inspections for key turnover

•

Attend customer weekly meeting

•

Notify Project Management of key Quality Issues

•

Maintain Quality Records

•

Thermo Vac Inc.

201 W. Oakwood Rd Oxford MI,

248-***-**** Walter Peterman (Owner)

A 16.8 Million Dollar Fabrication leader of wear

solutions products, large O.E.M supplier Power

Generation / Specialty Fuel Systems / Government Grade Feb,,2006,

Fabrication. May,2007

Director of Quality Systems /Quality Assurance

Manager

Site Director & Manager in charge of quality systems

•

Implementation and deployment of six sigma

•

methodology DMAIC

Organized and developed Thermo Vac Inc. Quality

•

Department

Hiring, Overseeing, Training Quality personnel

•

Coordinate and lead six sigma projects

•

R&D *8D Process Control,Lean Manufacturing, OE

•

Involved in Inspection results, Welding D1.1 VT, MT, UT,

•

PT, RT, OF Power Piping Systems

Respond to complex customer quality requests, resulting

•

in increased quality awareness, and customer satisfaction

(SPC) (TQM)

Quality representative to customer and lead suppliers

•

Developed COPQ tracking system

•

Resolve customer complaints through activating

•

( PFMEA.)

•

Initiated the implementation of Lean Flow Management

•

In charge of ISO 9001 2000 program, internal audits to

•

comply with ISO Certification.

OVERSEE ENTIRE ORGANIZATIONAL QUALITY

•

OPERATIONS AND QUALITY PERSONEL

Quality Manager / Construction Manager / Quality Engineering Contractor

9/02-2006

Referral Dennis Silver Alstom Power 860-***-****

Contractor Multi million dollar

projects &Global Industrial leaders

Alstom Power, GE, Transco, Exxon Mobil, Boeing, Stewart & Stevenson, Mc

Dermott Engineering, Calpine

• Quality management,Inspections, construction Management, Quality

Consulting

• Site quality specialist Manage & Train quality inspectors

• Audit to ISO 9000 Manufacturing 9001 2000,

• Approve release of equipment and or material against approved drawings

• Manage Construction from Start up to Turn over

• Final review and approval for all turn over packages of quality records from site

contractors. Walk down units and verify installations were correct to approved

drawings and specifications. Coordinate with field inspectors of optional hold

points for key inspections

• Assembled Quality records and tests for multiple projects including Electrical

and Instrumentation, Fire Protection, Mechanical, Piping

• Review Piping, Electrical, and Instrumentation Turn Over Package’s at site.

TMP Worldwide,

407-***-**** Amy Montag Smith Recruiter 04/02 to 08/02

Construction Quality Management Supervisor

Iquais Gas Croghan, NY

Supervise new construction for Electrical and Instrumentation Contractor at site

•

(Gas Compression Station) Review E&I Drawing package and verify installation to

be according to approved Engineering drawings and NEC codes. Notify city

inspector of key inspection points during Construction. Inspect contractors

Installation.

Issue Contract work orders for additional approved drawing revisions.

•

Interact with E&I contractor to insure construction schedules were on time per

•

contractual agreement

Report to customer site supervisor on a weekly basis of construction progress and

•

or material problems.

Assist contractor in Expediting job Materials to site to maintain Construction

•

schedule.

Receiving Inspection to quantify correct components and equipment were received

•

Coordinate with other contractors of key installations without interruption

•

T M P Worldwide, Ovieda, Florida

254 Plaza Dr

5/2001 – 3/2002

Oviedo, FL 32765

407-***-****

Project Quality Specialist Supervisor: David Croft 804 763

7223

Alstom Power / Turbine Division, Midlothian, Virginia

Assembled Quality records and tests for multiple projects for Electrical &

•

Mechanical Sys.

Review E&I / Mechanical Turn Over Package’s at site.

•

Re

•

viewed Quality documents and created a Quality Shop Records for the customer.

Trained in Lotus Notes, six sigma green belt, Cost of Poor Quality (COPQ) and

Quality systems for Gas Steam & fossil fuel generation. Experienced in combined

cycle 850MW multi unit power Generation

Omega Natchiq: Bellechase LA

3/2000-5/2001

Electrical Engineering Technician

Site Engineering tech. for Loop LLC offshore deep water project south

•

Louisiana from offshore production platform to on shore pumping station to

main production metering station to intercostals water way shut off stations

including communications towers and communications data buildings. Provide

customer with updated E&I drawings of field changes by red lining existing

drawings to actual field installations and new devices installed. To assist in

transfer of existing drawings to a CAD file. Also provide basic engineering

drawings for their E&I Changes and communications building and the remote

valve yard. Photograph site Changes with digital camera and provide detailed

reports on site with lap top computer and make changes on site to cad

drawings using Auto Cad 2000 program. Meet once a week with engineering to

review project status. Also provide engineering support to customer in area

classification to insure drawings reflect proper classification divisions were

listed in specifications and drawings.

I n te r tek Testing services: Pasadena TX

07/97 -10-99

01/96 to present

Quality Assurance Consultant Supervisor Recardo Nunez 713-***-****

• QA / QC Inspector for various customers across USA worked in many phases of

construction from offshore and petrochemical, Refinery, E&I field Inspection

including Electrical shop inspection to field installation. These inspections included

but not limited to insuring customer specification were being meet and scope of work

were produced to approved drawings verifying dimensions, tolerances, calibrations,

lay out, materials, visual, and product integrity were meet to P.O. requirements. These

tasks including fabrication, installation, testing, and the quality documentation were

as client requested. I issued inspection reports to customer and inspection release to

vendors. I also issued non-compliances reports (NCR) to customer and vendor. And

followed the corrective action report to customer was suitable to continue the project

with current vendor and or materials. I provided detailed reports to customer of

project status current expense to date. These projects were also photographed in

stages via digital file and forwarded to the customer via the internet and hard copy

follow up.

Tracked job expense reporting directly to customer via phone, fax, and E Mail.

•

M TB Quality Consultants: Baytown, TX

10/93 - 07/97

Quality Engineer

Third party inspector at various locations across USA & Mexico assigned to inspect

•

and review E&I / Mechanical projects vendor fabrication and documentation to insure

that purchase order requirements were followed according to the approved

specifications, gather all certifications and documents per customer requests.

(Inspections, E&I, Welding VT, UT, MT, PT /Mechanical

Sub contracted to G.E Power Products for in house receiving inspector for incoming

•

E&I and mechanical parts for LM6000 generator (Inspections, E&I, Welding VT,

Dimensional

Inspected equipment and witnessed functional tests to insure quality standards were met

•

Offshore E&I Construction inspector at site walk down unit, creating punch list items

•

and or corrective action items bringing attention to engineering of potential design

changes for revisions to drawings.

Created inspection project files including photos, and inspection reports from start to finish.

•

John Brown Engineering: Baytown, TX

12/92 to 9/93

06/93 to 11/94

E&I Superintendent, Exxon Baytown TX.

Duties included recruiting all personnel for hire, order project material, expedite material

equipment to job site as needed, ascertain the use of rental equipment needed, project cost

tracking man hours spent, and absentees, inspection sales to customer

Working Knowledge Inspection and Installation of the Following:

Manufacturing Facilities Specialty Fabrications’ Mechanical Assembly

Combined & Single Cycle Power Plants, Several Plants Piping Systems

Petrochemical Refineries Exxon, Baytown, TX PLC’S, MCC, DCS

Offshore Platforms Exxon Mobil, Penzoil, Loop LLC Relay Control Cabinets

Chemical Plants Shell Deer Park, TX Instrumentation Transmitters

Plastics Plants Mobay Bayer Baytown, TX Interface

Mining Facility Kennocott Cooper Mine Magna, UT Motors AC/DC

Mechanical Pumps

Stewart & Stevenson Tactical division Electrical

Heavy Manufacturing, Fabrication Valves MOV POV

Facility for Motor Control Centers Turbine Engines

Seimens Mexico, Fabrication Facility Pneumatics

Generator Manufacturing GE Power Products Scrubbers

Machining Large Complex Components Piping Systems Thermal protection

Combined cycle and fossil fuel power generation

Remote Terminal Units

(Alstom) Turbo Machinery Group, Nuclear

Power Distribution Panels

Construction sites Civil, Steel, Electrical, HVAC, FP.

Transformers, Corrosion Protection System

Commercial building (1YR)

Education and Special Training:

Member of American Society of Quality, West Palm Beach Chapter

Certified: Black Belt of Six Sigma Methodology Six Sigma US 2006.

Certified Quality Engineer (CQE) Texas Quality Institute of Quality Standards 1989

Certified Electrician, 1987 Diploma at Sanjacinto College Pasadena TX

40 Hour HAZWOPER Federal OSHA Regulation 29 CFR 1910

30 Hour Construction Safety Federal OSHA regulation 29 CFR 1926

Offshore survival Training 1989 2000 Exxon Mobil Dolphin Island AL

Houston Area Safety Council – HAZMAT Training

7yrs Safety Training

Supervisor safety analysis team SWAT Safety with a twist

Construction Safety management (CSM) Required by Exxon USA for site supervision

Construction Equipment Operation

Welding Inspection VT, UT, PT, MT, RT

Hazardous Gases H2S ETC. Offshore and Onshore

Job Safety Analyses JSA

DOT. Specifications Regulations

MSDS Sheets (Documentation)

Auto cad 2000 Basic Engineering Construction. (Red Line existing CAD files)

Lotus notes John Tyler University Midlothian VA. Alstom

MS Word, Excel, Outlook, PowerPoint Presentation Specialist Mini Tab, Access

Project Information Retrieval System (PIRS) Alstom

Construction Quality Management Process Analysis (CQMPA) GE Training

Six Sigma Introduction to Quality Data Input GE

COPQ cost of poor quality training GE Alstom

Supplier Chain Quality GE

International Standards Training ISO 900*-****-****/ TS16949 ……MTB

Contact this candidate