Mustafa Kececi

**** ********** **. **********, ** 30022 - 770-***-**** - abkanb@r.postjobfree.com

Career Objective

A challenging leadership position in industrial control technology that

utilizes my background in developing applications of high quality.

Experience-Highlights

International Services, Atlanta GA USA

Consultant Engineer (Automation-Control)-Contractor

February 2004- Present

. Worked as T3000 HW Engineer of BOP and ABB ST for LSP- Batesville, MS.

. Worked as T3000 Startup and Commissioning Engineer of GT501F for AEP-

Shreveport, LA. Also performed CV testing, prestart simulation and

start of GTs.

. Worked as T3000 Software developer of BOP part of NRG-Baytown, Texas.

. Worked as T3000 Startup and Commissioning Engineer of BOP part for PEC-

Marib, Yemen.

. Worked as T3000 Startup and Commissioning Engineer of GT-501and BOP

for AES-Uruguauiana, Brazil.

. Worked as Siemens-T3000 software developer. Migration of Ilsan-Korea

Power Plant WDPF software to Siemens-T3000.

Siemens Westinghouse Power Corporation, Alpharetta GA USA

WDPF I&C Engineer

February 2002- September 2004

. Worked as Westinghouse WDPF I&C Engineer. I was charged with I&C Field

start-up and to implement Production Modification Application of Coal

Fired Power Plants, Combined Cycle Gas/F.Oil Power Plants and Nuclear

Power Plants.

. Worked as S7-Wincc Commissioning Engineer for Siemens at Aramco

Refinery at Riyadh, Saudi Arabia.

ENKA-Bechtel Power, Izmir TURKEY

DCS Start-up Engineer October

2001 - January 2002

. Worked as responsible for Bailey Infi-90 DCS during the start-up.

Westinghouse WDPF I&C Engineer. I was charged with I&C Field start-up

and to implement Production Modification Application.

Assan Aluminum Works, Istanbul TURKEY

Electronics, System and Automation Manager

February 2000 - May 2001

. Responsible for implementation, maintenance, rehabilitation and

modification as a management and decision staff of all electronic

systems such as PLC, Motor Drive Systems and quality control devices.

. Managed the development application team of Foil Annealing Furnace

which this project was realized by using Allen Bradley PLC5.

. Involved in the Electronic Documentation Management System Application

team of 5 people. This team did systems analyzing of this project and

workflow logic.

. Algorithm that provides communication strategy between PLCs is in all

over factory and SCADA computers were realized by my supervision.

. Developed and modified some milling program blocks that are belong to

Achenbach Cold Mill on OS/2 using IBM VisualAge.

Esenyurt Co-generation Plant (An affiliate of Edison Mission Energy/USA),

Istanbul TURKEY

I&C and Engineering Supervisor December

1998 - February 2000

. Responsible for maintaining and developing all applications in Elsag

Bailey Infi90 DCS and GE-MarkV Turbine Control Computers.

. Undertook all engineering work such as optimizing heat balance of

plant, empowering project of ACC (Air Cooled Condenser) motors,

optimization of heat rate using DDE and @Aglance application etc.

. Responsible for Systems Administration of Lotus Notes and CMMS

(Computerized Maintenance Management System).

Erdemir - Eregli Iron and Steel Works Inc., Eregli TURKEY

Instrument and Control Chief Engineer

October 1992 - December 1998

. Started developing pilot applications for Automation of Maintenance

Management on VAX/VMS using VAX Fortran for Power House that was

controlled by WDPF.

. Participated revamping project of 2nd. Coil Mill as start-up engineer.

In this project GE Control series (MM2000, SC2000, Genius I/O, etc.)

were used.

. Developed a new application in PCH of WDPF for optimizing fuel

consumption of Batch Annealing Furnaces using WDPF tools, PCH tools,

OS/2 tools and MS C++ v.6 as Master Thesis. In this project,

statistical control and fuzzy logic algorithm were used in PCH (level

2) section and to control the on-off valves in PID algorithm, PWM

technique was applied in DCS (level 1) section. As result of this

project, power consumption was decreased by 17%.

. Realized all items as H/W and S/W of Natural Gas and Air Mixing

Station project of the Reheat Furnace No: 3 using WDPF v5.7 DCS by

Control Algorithms and MMI Screens. This was realized for the first

time in the world. The main target was to decrease the calorific value

of mixed gas to coke oven gas using air and natural gas control valve

by controlling the volume of them and oxygen quantity.

. Using two different sections PLC (ARP and CPL), acid usage

optimization was realized according to speed of coil. With this

project acid consumption was decreased by 23%.

. In the Tinning Line upper and lower band control and tin plate

labeling system application was done by using data acquisition board

and Visual C ++ (MFC) language.

Ministry of National Defense, Ankara TURKEY

Programmer/Analyst/IT Manager

August 1990 - July 1991

. During my Service of Military Obligation, I supported computer

activities of military service.

. Managed the UNIX server (Honeywell-BULL) and client machines.

. Maintained the server and responsible for the back-ups.

. Prepared some useful macro in UNIX to transfer the data from different

type host computer to Service Server.

. Two sub-department's application software was realized by using ISQL,

I4GL and Unix-C.

Education

Istanbul Technical University (ITU), Istanbul TURKEY

Middle East Technical University (METU), Ankara TURKEY

Master of Science in Electronics Engineering

Sep.1989-Feb.1995

. Started to MSEE in METU at Control Department and continued MS

education at ITU. I got MSEE degree from ITU on 1995 and major is

Control Engineering.

. Master Thesis subject is Optimization of Batch Annealing Furnaces by

using WDPF (Westinghouse DCS). Developed Fuzzy Logic and Statistical

Control S/W in C++. Main goal is optimization of the annealing time of

the steel coils. With optimization project, fuel consumption is

decreased 13%.

Hacettepe University (HU), Ankara TURKEY

Bachelor of Science in Electronics Engineering

Sep.1984 - June 1989

. 1 year prep English school and 4 year BSEE.

Skills

. 10-Year power plants and 8-year iron and steel industry automation and

control experiences.

. 5 years experience on Siemens-T3000 systems.

. Westinghouse WDPF DCS: 8 years of total experience in especially

version 5.6, 6.X, 7.X, 8.X (WEStation) of WDPF with strong knowledge

on MMI, Control Algorithm S/W commands. Ability in developing every

kind of control applications including PC on Hiway applications in

C++, operator screens, control database, VXI, HDR and HSR. High

interest in researching technical solutions and developing system

programs as needed.

. H/W design, Marshalling Panel design, P&ID design.

. Experience in different Operating Systems: Vax-VMS, Unix, OS/2, DOS,

Win9X, WinNT

. Experience in different Control Systems as DCS: Westinghouse WDPF,

Elsag Bailey INFI90, Yokogawa Centum-XL, and HONEYWELL TDC3000.

. Experience in different Control Systems as PLC: Westinghouse Numa-

logic, Siemens S5-S7 (Coros), Reliance Automax, Allen Bradley PLC5-

SLC500, AEG-Modicon, GE-MarkV

. Experience in S/W Language like MS C++v6.0, MFC and Visual Basic.

. Ability to lead a team or become a member of team - good communication

skills with team members and end users.

. Experience in Management Level: 3 Years Chief Engineer, 3 Year

Supervisor, 2 year Manager.

. 5 years experience on Commissioning and Start-up Engineering

. Background in Computer and Control Science and potential for new

technologies

Training and Courses

. Siemens-T3000 User and Software Training, Alpharetta, GA/USA 2008

. Siemens-T3000 User and Software Training, Alpharetta, GA/USA 2006

. ISA Measurement and Control Fundamentals, Alpharetta, GA/USA 2002

. Rockwell Automation, Allen Bradley PLC5 Full Training, Istanbul/

Turkey 2001

. Achenbach Strip Flatness and Gauge Control System, Siegen/Germany 2000

. Instrumentation Fundamentals, Derby/UK 1999

. Bailey/Infi-90: Part1- PCU M101, San Francisco, CA/USA 1999

. Edison Mission I&C Conference, Los Angeles, CA/USA 1999

. Simatic-S7, Kdz.Eregli/Turkey 1998

. DEC-VAX-Unix System Administration, Istanbul/Turkey 1997

. LOGIN, Developing App. Using I-4GL, Istanbul/Turkey 1997

. LOGIN, Developing App. Using I-SQL, Istanbul/Turkey 1997

. LOGIN, Advanced Informix 4GL, Istanbul/Turkey 1997

. LOGIN, Relational Database Design, Istanbul/Turkey 1997

. Westinghouse/WDPF: Advance Control, Pittsburgh, PA/USA 1996

. Westinghouse/WDPF: Advance Graphics, Pittsburgh, PA/USA 1996

. Radiometrie/DMC: X-ray thickness Gauge, Gaithersburg, MD/USA 1995

. Erdemir, Management Skills, Kdz.Eregli/Turkey 1995

. Yokogawa/Centum XL: Fundamentals & Eng., Tokyo/Japan 1995

. Toshiba/Tosgage: G-Ray Thickness Gauge, Tokyo/Japan 1994

. ETA, Fundamental of Unix, Istanbul/Turkey 1994

. Simatic-S5, Istanbul/Turkey 1993

. Westinghouse/WDPF: Maintenance, Pittsburgh, PA/USA 1993

. VAX/VMS System Management, Istanbul/Turkey 1990

Contact this candidate