FRANK M. SILVA
Reno, NV *****
Phone: 707-***-****
E-mail: abk03d@r.postjobfree.com
abk03d@r.postjobfree.com
SUMMARY OF WORK EXPERIENCE:
Twenty years plus extensive experience in mechanical design engineering
in
Aerospace, Telecommunications Systems, Electro-Mechanical Packaging and
Automotive. Enjoy taking projects from concept to prototype then to
production.
Summary of Competencies
. Mechanical Designer
. Manager of multiple projects
. Structural Design
. Design engineering of commercial aircraft
. Author of Mechanical Engineering Handbook, Pro/Intralink procedures
Electro-Mechanical packaging
. Telecommunications
. Windchill, Pro/E Engineer (2.0Wildfire, 3.0Wildfire, 4.0) Pro/E
Intralink, Pro Cable
. Knowledge of Windchill
. Automotive (John Deere Tractors)
. Lasers (Semiconductors)
. Refrigeration units for Semi Trucks
PROFESSIONAL EXPERIENCE:
MECHANICAL DESIGN ENGINEER 04/08
to 07/10
Under contract to Thermo King
. Design of cable harness for the V520-10 and V520-20 program
. Design of mechanical parts for the V520-10 and V520-20 program
. Design of mechanical parts for the E-VAP, ES300 and ES500 series
. All work was accomplished by using Pro/Wildfire 2.0, Routing System
(Diagram,
Cables, Manufacturing for flatting harness, Pro/Sheet Metal,
Pro/Piping and Windchill
MECHANICAL/ELECTRICAL DESIGN ENGINEER 09/07 to 02/08
Under contract to Varian Semiconductor Equipment
. Design of cable harness for the Stealth lasers program
. Design of mechanical parts for the Stealth lasers program
. All work was accomplished by using Pro/E Wildfire 2.0, Wildfire 3.0,
Agile,Routing
System (Diagram, Cables, Manufacturing for flatting harness, Pro/Sheet
Metal,
Pro/Intralink 3.4 and all other related PTC programs.
MECHANICAL DESIGN ENGINEER 08/06
TO 09/07
Under contract to Delphi Automotive
. Design of cable harness for the 9000,8000 and 7000 series tractors.
Chassis harnesses
Consist of the following harnesses: Chassis harness, Axel Harness (front
and rear),
Back-up harness, Hood harness and Autoloader harness and more.
. Design of cable harness for the 9000, 8000 and 7000 series tractor cabs.
Cab harnesses
consist of the following: AC Harness, Roof Light Harness, Armrest
Harness, Main
Cab Harness, Seat Harness and Steering Harness.
. The longest harness consists of 100 plus connectors and more than 350
wires
. All work was accomplished by using Pro/Wildfire 2.0, Routing System
(Diagram,
Cables, Manufacturing for flatting harness, Pro/Sheet Metal,
Pro/Intralink 3.3 and all
other related PTC programs.
MECHANICAL DESIGN ENGINEER
08/05 TO 08/06
Under contract to Cymer, Inc
. Re-design of the cable system for the 6000, 7000, 7010K, 7600 and 7400
lasers, ASC
power box,Nema 12 400V breaker panel, This is just some of the projects
I did in
Pro/Cable.
. Design and redesign of sustaining project, such as wave meters, power
supplies and
more, also the investigation and correction of CSR's and CO.
. All work was accomplished by using Pro/Wildfire 2.0, Routing System
(Diagram,
Cables, Manufacturing for flatting harness, Pro/Sheet Metal,
Pro/Intralink 3.3 and all
other related PTC programs.
. Processes and Procedures: ANSI/ASME Y14.5-94, Company Standards Specs,
GD&T,
MIL-STD and ISO Standards.
MECHANICAL DESIGN ENGINEER
02/05 TO 08/05
Under contract to DRS Systems
. Re-design of the cable system for the target systems for the Apache
Helicopter.
. Development of Pro/Cable procedures for the mechanical engineering
group.
. Pro/Engineer Administrator for the mechanical engineering group.
. All work was completed using programs, such as Pro/E, Pro/Sheet Metal,
Pro/Intralink
Pro/Cable and all other related programs.
. Processes and Procedures: ANSI/ASME Y14.5-94, Company Standards,
Customer
Specs, MIL-STD and ISO Standards.
MECHANICAL DESIGN ENGINEER
11/02 TO 12/03
Under contract to Alcatel USA, Petaluma, CA
. Assist in the development of mechanical design for the LSC-2220 line
remote
subscriber cabinet that required the planning of wiring harnesses using
Pro/Cable.
Component locations for items such as channel bank assemblies, protector
panels,
Universal power assemblies, fuse panels, fans batteries, heat exchangers
and portions
of the cabinet.
. All work and designs were created on Pro/Engineer 2000i2 and 2001,
Pro/Intralink,
Unix and Oracle
. Author of the Pro/Intralink V3.2 and 3.3 release procedures for the
Engineering Service
Department.
. Author of the Mechanical Engineering Handbook for the Mechanical
Engineering Dept.
. Instructed the mechanical engineering group in the use of the PTC
Pro/Cable,
. Pro/Harness and Pro/Intralink.
. Programs to complete projects: Pro/E Pro/Sheet Metal, Pro/Intralink,
Pro/Cable,
Pro/Harness, Pro/Surface, Pro/Mechanica, Auto-Cad and all other related
programs
to complete project.
. Processes and Procedures: ANSI/ASME Y14.5-94, UL-950, Company Standards,
Customer Specs, GD&T, NEBS and ISO Standards.
MECHANICAL DESIGN ENGINEER
05/97 to 08/02
Advanced Fibre Communication, Petaluma, CA
. Designed various remote subscriber cabinets and all related components
that are
installed into the cabinet.
. Designed load centers, power supplies, heat exchangers, breaker panels,
cooling
system for cabinets, channel banks, protection panels, fiber panels,
T1/E1 panels
And fan trays.
. Instructed the mechanical engineering group in the use of PTC Pro/Cable
and
Pro/Harness.
. All work was completed using programs, such as Pro/E, Pro/Sheet Metal,
Pro/Intralink,
Pro/Cable, Pro/Mechanica, Pro/Surface and all other related programs.
Processes and Procedures: ANSI/ASME Y 14.5-94, UL-950, Company
Standards,
Customer Specs, GD&T and ISO Standards.
STRUCTURAL DESIGNER
08/89 to 04/97
Boeing, Everett, Washington
. Assisted in the design of structural and mechanical parts of various
commercial aircraft
Including the 747-400,777, 767-300,757 and 727 aircraft.
. In charge of conversion of all manual drawings for the 767 and 747
aircraft into Catia
datasets
. Effectively eliminated outstanding engineer liaison requests and
material review board
tags.
. Efforts reduced future nonessential spending for the Accurate Fuselage
Assemble
(AFA)
. Successfully redesigned various parts, assemblies and internal
components that allowed
timely delivery of the aircraft to the customer.
. Collaborated with manufacturing engineers on the investigation and
resolution of
engineer liaison requests and material review board tags (MRB) through
mechanical
redesign of structures and multiple components.
. All work completed using programs, such as Catia, APLG and all related
programs
to complete the project.
. Process and Procedures: ANSI/ASME Y14.5-94, Company Standards, Customer
Specs,
GD&T and MIL-STD
EDUCATION
Tucson College of Business
AA Degree Mechanical/Structural
Tucson, Arizona
SKILLS:
Pro/Engineer (v2000, 2000i2, v2001 and Wildfire 2.0, 3.0 and 4.0), 10,000
Hours Pro/Intralink (v3.0, v3.2, v3.3), Pro/Sheet Metal,
Pro/Cable, Pro/Diagram, Pro/Harness
Pro/Surfacing
Pro/Mechanica
Pro/E Wildfire
Windchill
Catia v4:10,000 plus hours
Auto-Cad v14.0: 6000 plus hours
Microsoft programs: Word 95, 98, 2000, MS Project, Excel, Power Point,
Outlook, NT and XP
Adobe programs: Acrobat 4.0, Page Maker 6.5, Distiller 4.0, and Photo
Shop 6.5, Adobe Illustrator for Art work and Silk-Screens
MIL-STD, ANSI/ASME GD&T UL 1950, NEBS and ILEC specific requirements and
ISO Standards.
Electro-Mechanical Packaging