Engineer Project Manager
Resume:
RESUME
of
T. ANDY LAMM, PE
**** **** ****** **., *******. NC 27610
(h) 919-***-**** (c) 919-***-****
Emails: abjc2r@r.postjobfree.com, abjc2r@r.postjobfree.com
Education:
B.S., Civil
Engineering
North Carolina State University,
1977
Professional Registration:
Professional Engineer: North Carolina - PE # 11293 (1983)
Professional Organizations:
Member - National Society of Prof. Engineers / PENC
Member - N. C. Rural Water Association
Member - AWWA-WEA
Professional Responsibilities:
Office Manager Project Manager Project
Engineer / Designer
Marketing Client Relations
Construction Administration / Inspection
Professional Experience Summary & References:
During my professional career I have developed experience as a multi-
disciplined project engineer with over thirty years of design experience.
My extensive experience has been in all aspects of municipal utilities
engineering, including sanitary sewer collection, sewage lift stations and
force mains, water distribution system design, street design and storm
drainage including both public and private projects. My scope of
experience ranges from preliminary project planning, supervising field
surveys, property investigation and acquisition, water and sewer utilities
design, plan/profile preparation, technical specifications, material
takeoffs and cost estimates, obtaining all permits, bidding document
preparation, advertising and administering bid openings, checking all shop
drawings, field inspections, to preparing as-built drawings. I am also
experienced in the acquisition of various permits required by various State
and Federal Agencies including NCDENR, Land Quality, CAMA, Corps of
Engineers, EPA, NCDOT, along with funding through USDA Rural Development,
CG&L, SRF and CDBG Programs. I have extensive experience with University
infrastructure work, including steam lines, chilled water lines, and
electric/communication duct bank projects involving the NC State
Construction Office. I also have experience with Civil / Site work in both
residential and commercial development projects.
As you will see from my resume, I have more than ample experience collected
in my 30-plus-year career in utility and site development projects. I have
not only been a project manager, but I have also been a department and
office manager. From these positions I have personnel supervisory and
management experience, and believe that I work well with others.
I am a local individual, growing up right here in the Raleigh area, and
proud to be an NCSU alumnus. I have over 30 years of design and project
management experience right here in North Carolina, from Dare County to
Cherokee County, and from Northampton County to Brunswick County. I have
been blessed to have worked on a wide range of projects, including numerous
sanitary sewer lines, sewer lift stations, water lines, booster stations,
elevated water tanks, steam distribution lines, chilled water lines, gas
lines, site grading, storm drainage and other municipal, land development
and university projects. All of this is detailed in my resume. Following
are some of my references:
Clint Berry Aaron B. Brower, PE
Robin A. Jensen
Director of Public Services Construction Projects
Administrator (co-worker)
Hyde County Utilities City Of Raleigh Public Utilities Dept.
Garner, NC
252-***-**** (Direct Line) 919-***-**** (Direct Line)
919-***-**** (c)
Steve Biggs Charles Derrick
S. Keith Cooper, PE
Town Manager Public Services Director
(long-time associate)
Town of Clayton, NC Town of Topsail Beach, NC
Charlotte, NC
Selected Examples of Project Management and Design in Each Discipline:
PUBLIC UTILITIES:
Town Sewer Collection System, Broadway, NC - Project Engineer responsible
for the design and plan preparation of the complete town sanitary sewer
collection system, including approximately 77,500 linear feet of 8" and 10"
sanitary sewer lines, three sewage lift stations, and 6000 linear feet of
4" force main.
Lower Crabtree Creek North Sewer Outfall, Raleigh, NC - Project Manager /
Engineer responsible for the design of this project for the City of
Raleigh, which included the design of an 18" gravity sanitary sewer from an
existing regional sewage lift station, north along Crabtree Creek, crossing
under bridges for the US 64 / 264 Bypass, crossing a railroad, turning west
and paralleling the railroad until reaching a lift station that the City
wished to take out of service. Approximately 700 linear feet of the 18"
line was aerial on concrete piers. This project also had a 12" branch line
that ran along an existing lake to another lift station that the City
wished to take out of service. Part of this line included bypass pumping
and taking up an existing 8" line and re-laying the 12" flowing in the
opposite direction to minimize the impact and utilize the City's existing
easement along the lake.
2007-2008 Street Improvements, Clayton, NC - Design Engineer responsible
for the design, engineering plans and specifications for the water, sewer,
storm drainage and pavement improvements for three blocks of Second Street
and all of Kennel Street, along with water line extensions and resurfacing
of Church Street and two blocks of Barbour Street. Resident and EMS access
is to be maintained during construction.
Township 7 Water Extension, New Bern, NC - Project Manager / Engineer
responsible for the design, engineering plans and specifications for the
city water service extensions, which included a new 500,000 gallon elevated
water storage tank, two new 1200 gpm booster pump stations and relocating
and upfitting an existing booster pump station and approximately 1000 feet
of 12" DIP water line.
Township 7 Sewer Extension, New Bern, NC - Project Manager / Engineer
responsible for the design, engineering plans and specifications for the
city sewer service extensions, which included 10", 12" and 16" force mains,
improving the sewer capacity of the area.
Reverse Osmosis Water Treatment Plant, Hyde County, NC - Project Manager /
Engineer responsible for the design of the Town of Engelhard's new 200 GPM
R/O Water Treatment Plant, which includes two new production wells, the R/O
plant (which included a single R/O skid, internal pumps and piping,
chemical feed, a 200,000 gallon ground storage tank, a free-standing
aerator, high service pumps), finished water main out to the existing
system, and approximately 2 miles of concentrate force main to the approved
discharge point in the nearby sound with a diffuser. I worked with Rural
Development for funding and other agencies for permits.
Reverse Osmosis Water Treatment Plant Expansion, Ocracoke, NC - Project
Manager / Engineer responsible for the design of the Town of Ocracoke's new
200 GPM R/O Water Treatment Plant expansion, which includes upgrading pumps
in two production wells, the R/O plant expansion (which included the
building expansion - constructed entirely while the existing part of the
plant remained in operation, a single additional R/O skid, internal pumps
and piping, chemical feed enhancements, new high service pumps), new
finished water main out to the existing system, re-routing existing supply
piping to maintain plant operation during construction and approximately
800' of new concentrate force main to the approved discharge point in the
nearby sound with a diffuser. I worked with Rural Development for funding
and other agencies for permits.
Neuse River Outfall, Pump Stations and Force Mains, Clayton, NC - Design
Engineer responsible for the design, engineering plans, specifications and
permits for the installation of a gravity sewer outfall, two pump stations
and force mains along the Neuse River. The gravity sewer outfalls were 18"
and 20" DIP. There were two (2) 750 GPM sewage lift stations, with initial
flows of approximately 150,000 GPD with ultimate flows exceeding 750,000
GPD. One pump station pumped to the other VIA an 8" force main along the
river with a directional bore under the river to the outfall on the other
bank. The second lift station pumped through a 12" force main that ran
approximately 2.5 miles back to Clayton, with a static head of over 200
feet. The permits included DENR (Land Quality & Water Quality), U. S. Army
Corps of Engineers, NCDOT and N. C. Railroad. This naturally also involved
working with the Neuse River Basin Water Quality Management Plan and the
Authority.
Research Triangle Park Sewer Extension - Design Engineer responsible for
the design of a sanitary sewer collection system (8"-30" diameter pipes)
for a new O&I development area in the RTP, including the design of an eight
million gallon per day submersible sewage lift station. The custom-built
submersible sewage lift station had a 52-foot diameter wetwell with three
(3) 200-HP submersible pumps and a fourth 100-HP low-flow pump. There was
more than a mile of 18" sewage force main, part of which crossed I-40
highway beneath two bridges.
Starmount Sewer Pump Station Replacement, Clayton, NC - Design Engineer
responsible for the design, engineering plans and specifications for the
replacement and relocation of an old, under capacity sewage pump station.
Falls of Neuse Road 12" Water Line Extension, Raleigh, NC - This project
was for the City of Raleigh, which included the design of the 12" Water
Main Extension northward along Falls of Neuse Road from the Woodbridge
Subdivision, across the Neuse River and up to serve Wakefield Subdivision.
This project involved an interesting challenge of crossing the Neuse River
either on piers or attaching to a 60-plus year old bridge. Attachment to
the bridge was the preferred alternative from the Engineer's, City's, U. S.
Army Corps of Engineers and NCDOT's perspective, which is what we did.
This did involve special bridge attachment design and permitting from NCDOT
Design Services Division. The project also included approximately 9,300
linear feet of 12" DIP water main, attachment to a second bridge over Falls
Lake Dam emergency spillway (both bridges totaling almost 700 feet) and
approximately 2300 linear feet of 8" water line, including all
appurtenances such as valves and hydrants.
Raleigh Sewer Extension, Raleigh, NC - Project Engineer for the First Free
Will Baptist Church Sanitary Sewer Extension for the City of Raleigh, which
encompassed extending the City of Raleigh's sanitary sewer system out of
Trawick Downs Subdivision with an 8" sewer line, then turning and running
northwest along Trawick Road up to Dogwood Drive. There was also an 8"
sewer stub-out across Trawick Road to serve the church. On the church
grounds, the existing sewage drain lines from the buildings that had once
fed into a LPP system were diverted into a new grinder pump station and
pumped back up to the new sewer. Also included in the project was to
supply a new water service off a new water line to supply the church and
school, which included a fire line and service line, master meter and
backflow prevention equipment and vault.
Claridge Nursery Irrigation System Upgrades, Goldsboro, NC - Final Project
Engineer responsible for the final design, engineering plans,
specifications, State Construction Office approval, 'no-rise' certification
and contract implementation for the upsizing and replacement of the under-
capacity N. C. Forest Resources Nursery irrigation system. The old system
was replaced with a new raw-stream-water intake and pump station system
including filters, new irrigation mains and laterals, new spray heads and
controllers. Once this system was put on-line, it basically doubled the
size of the nursery beds and growing capacity of the facility.
Community Water System Extensions, Broadway Water Association, Wilkes
County, NC - Design Engineer responsible for the design, engineering
plans, specifications and permits for the installation of community trunk-
line water distribution system extensions that included 7 miles of 6" water
lines.
Wastewater Treatment Plant, Town of Magnolia, NC - Project Engineer
responsible for the preliminary design of the Town's new 250,000 GPD
Wastewater Treatment Plant, assisting in Grant Applications for funding,
along with a proposed effluent pump station and approximately 2 miles of
effluent force main to the approved discharge point.
Cary Parkway Extension Utility Conflicts, Cary, NC - Engineer responsible
for investigation of existing utilities in the path of the proposed final
leg of the Cary Parkway. My responsibilities included the file and field
investigations of the different existing public utility companies' possible
conflicts with our proposed work, designing and coordination of
necessitated relocations, as well as the design of the proposed 12" and 24"
water lines of the Towns of Cary and Morrisville that is to parallel the
proposed roadway alignment, including solving the challenge of crossing a
railroad.
John Street Outfall Replacement, Clayton, NC - Design Engineer responsible
for the design, engineering plans, specifications and permits for the
installation of an 18" DIP gravity sewer outfall, replacing an old 8" & 10"
VC sewer in the same location, including maintaining existing flows and
connections. This did involve some by-pass pumping and daily re-
connections of adjacent residences, which meant timely testing and
acceptance. We also had to maintain residence access.
Town Sewer Collection System, Black Creek, NC - Designer of the complete
town sanitary sewer collection system and sewage lift stations for the Town
of Black Creek, NC, which included correlating the system with a sewer
outfall from Lucama, NC, through Black Creek, to the City of Wilson
sanitary sewer system and doing the deed research on the interceptor sewer.
County Water System, Brunswick County, NC - Project Engineer of a complete
county-wide trunk-line water distribution system, including approximately
45,000 linear feet of 42" water line, 33,000 linear feet of 36" water line,
57,000 linear feet of 30" water line, 54,000 linear feet of 24" water line,
20,000 linear feet of 16" water line, 112,000 linear feet of 12" water
line, and 18,500 linear feet of 8" water line, along with five booster pump
stations and five 300,000 gallon elevated water storage tanks.
Industrial Utilities Extension, Rocky Mount, NC - Project Engineer
responsible for the design of the "Super-Lok" Industrial Development
project for the City of Rocky Mount, which extended City utilities to this
new industry, which included 10" sanitary sewer, package sewage lift
station, and 4" force main.
Water and Sewer Annexation Utilities, Albemarle, NC - Project Engineer for
the East Side Annexation Area water and sewer lines which included 6", 8"
and 12" water lines and appurtenances with 16" dry-bore-and-jack steel
casing, along with the installation of a 12" water line along the underside
of a NCDOT bridge. The project also included 8", 12", 15", 18" and 24"
sewer collection and trunk lines, sewer services and dry-bore-and jacking
of some highways.
'Masterbrand Cabinets' Gas Line, Lenoir County, NC - Design Engineer
responsible for the design, engineering plans, specifications, permitting,
bidding, etc. for approximately 8.3 miles of 4" gas main. This was a joint
CDBG and Economic Development project for Lenoir County to provide gas from
NCNG to an industry (Masterbrand Cabinets) and to Lenoir Community
College. He worked closely with NCNG to implement their standards, and the
project came in well under budget.
Commercial Utilities, Garner, NC - Design Engineer responsible for the
design, engineering plans, specifications and permits for the installation
of a grinder sewage lift station and force main for the Unicon Concrete
Company including dry-bore-and-jacking the force main under a railroad.
Municipal Utility Extensions - Project Engineer for the following various
annexation sanitary sewer and water extensions for various municipalities
around North Carolina:
Fairview Heights Earthwork, Streets, Sanitary Sewer and Storm Drainage
Improvements for the City of Salisbury, NC.
Gregory Branch Outfall Sewer, which includes 12" and 18" sanitary sewer
lines and appurtenances for the City of Statesville, NC.
I-95/US 64 Water and Sewer Line Extensions which included a 12"
sanitary sewer outfall and 6" and 8" water lines for the City of Rocky
Mount, NC.
Dillon Drive Sewer Outfall, which included 8", 12" and 18" sanitary
sewer lines for the City of Statesville, NC.
Water and sanitary sewer line extensions, including a package sewage
lift station and force main for the Town of Sharpsburg, NC.
Signal Drive 24" Water Line for the City of Statesville, NC, which was
a main trunk water supply line to serve an annexed area of the city.
Package sewage lift station and force main, and a water line extension
for the City of Rocky Mount, NC.
North Side Annexation Area sanitary sewer collection lines for the City
of Albemarle, NC, which included 8", 12", 15", 18", 24" and 30" sewer
collection and trunk lines, sewer services, dry-bore-and-jacking of
highways and tunneling under a railroad.
Town Creek Outfall, Crane Creek Outfall and Grants Creek Outfall, all
which were major sanitary sewer outfalls for the City of Salisbury, NC.
Stoney Creek Interceptor Sewer for the City of Rocky Mount, which
included an 18" - 30" outfall which was part of a larger project to
supply sanitary sewer service from Rocky Mount to the Town of Nashville,
NC.
Package sewage lift station and force main for the Town of Garner, NC
to serve East Garner Middle School.
Town of Topsail Beach, NC - Project Engineer responsible for the design,
engineering plans, specifications and permits for the town water system
SCADA system and chloramines improvements.
Landfill Leachate Pump Station and Force Main, Cherokee County, NC - Design
Engineer responsible for the design, engineering plans, specifications and
permits for the installation of a leachate sewage lift station and
approximately a mile of force main. The purpose of the project was to pump
leachate from a new landfill to the local sewage treatment plant, including
flow-monitoring control so the leachate pumped to the plant would not
exceed 10,000 GPD.
EPA-Funded Water and Sewer Improvements, Selma, NC - Project Engineer for a
water and sanitary sewer line project for the Town of Selma, NC, which
included water and sewer extensions, a package sewage lift station and a
force main involving dry-bore-and-jacking under a railroad, along with
providing the on-site inspection duties.
Wastewater Treatment Plant Equipment Replacement, Clayton, NC - Design
Engineer responsible for the design, engineering plans and specifications
for the upsizing and replacement of the mechanical barscreen at the head of
the WWTP, using the existing splitter box without interrupting flows and
making adjustments to make the new equipment fit and work. Custom mounting
brackets and allowances for the new point of discharge were implemented,
meeting the needs within the custom design parameters.
Annexation Utilities, Louisburg, NC - Project Engineer for the "Hillcrest
Subdivision Water and Sewer Lines" which provided water and sanitary sewer
services to the newly annexed area.
Annexation Sewer Utilities, Concord, NC - Project Engineer for the
Coldwater Creek Interceptor Sewer which included approximately 23,500
linear feet of 42" and 3,600 linear feet of 12" sanitary sewer outfalls,
420 linear feet of 78" steel tunnel liner, 2 sewage lift stations and
approximately 35,000 linear feet of 8" force mains.
Sprayfield 8 - Hyde County, NC - Project Engineer responsible for the
design, engineering plans, specifications and permits for the installation
of an additional treated water sprayfield for the medium-security prison in
Hyde County for the Department of Corrections.
Temporary Housing for Flood Victims, Princeville, NC - Project Engineer
responsible for design, permitting and construction coordination for two
(2) temporary mobile home sites for victims of Hurricane Floyd flooding.
Elevated Water Storage Tank - Project Engineer responsible for the design
plans and contract administration for a 300,000 gallon elevated water
storage tank for the Town of Fremont, NC.
Elevated Water Storage Tank - Project Engineer responsible for the design
plans and contract administration for a 300,000 gallon elevated water
storage tank for the City of Rocky Mount, NC.
Elevated Water Storage Tank - Project Engineer responsible for the design
plans and contract administration for a 300,000 gallon elevated water
storage tank for the City of Concord, NC.
Elevated Water Storage Tanks - Project Engineer responsible for the design
plans and contract administration for 500,000 gallon elevated storage tanks
for the City of Statesville, NC and the City of Independence, KS.
Site Investigations, NC Department of Corrections - Project Engineer
responsible for the site investigations of the wells and elevated water
storage tanks for eight correctional facilities for the NC Department of
Corrections, including water sampling, flow testing for capacity, and
physical conditions of the tanks and facilities.
Community Block Grant Program, Selma, NC - Engineer responsible for the re-
designing of a low-income area of the Town of Selma, NC, including the re-
platting of sub-standard lots and improving the water and sewer utilities
and storm drainage in the area.
Sewer Rehabilitation, Mount Olive, NC - Project Engineer responsible for a
EPA-funded sanitary sewer rehabilitation project for the Town of Mount
Olive, NC, which included replacement of irreparable sewer lines, point
repairs on other lines, internal cleaning and root removal, TV inspection,
pressure testing and grouting of joints of the sewer lines, and manhole
repair and sealing.
Inspection Services for Sanitary Sewer Rehabilitation, Selma, NC - Engineer
responsible for overseeing the operation of an underground TV/grouting
company for the Town of Selma, NC.
Downtown Storm Drainage Replacement, Clayton, NC - Design Engineer
responsible for the design, engineering plans and specifications for the
upsizing and replacement of undersized storm drainage to solve some
downtown flooding problems, which included the installation of 36" and 42"
RCP.
Community Development Block Grant project for the Town of Mount Olive, NC -
which included water, sanitary sewer, street and storm drainage
improvements.
Community Block Grant, Garysburg, NC - Design engineer and supervisor of
approximately 10,000 linear feet of street improvements, water and sanitary
sewer utilities, and storm drainage.
County Fairgrounds Sewer, Wilson, NC - Project Engineer of an on-site
sanitary sewer collection system, sewage lift station and force main for
the Wilson County Fairgrounds.
Professional Consultant - On retainer by the attorneys of the Town of
Lucama, NC as a professional consultant for a pending lawsuit, and I
investigated deficiencies in the Town's utility infrastructure and worked
toward solving as many of the existing problems as possible.
HIGHWAY:
NCDOT, Raleigh, NC - Project Manager responsible for the water and sewer
piping relocation layout and design for the Rock Quarry Road / Barwell Road
intersection improvements project (Project Reference # RS2574).
NCDOT, Winston-Salem, NC - Assistant Project Engineer responsible for the
stormwater piping system sizing, layout and design for the I900 A & B
sections of the I-40 highway in the Winston-Salem area.
NCDOT, Charlotte, NC - Assistant Project Engineer responsible for the
stormwater drainage design for the Eastland Mall access road project near
Charlotte.
INSTITUTIONAL:
Yarbrough Main Campus Chilled Water Plant Design, North Carolina State
University, Raleigh, NC - Local-office Civil Engineer assisting Project
Manager with civil CA issues that came up, as an extension of another
office's Civil Section. The project included 36" and 42" storm drainage,
sanitary sewer relocation, 30" and 27" chilled water supply and return
lines, duct banks, etc. associated with the new chilled water plant and
distribution lines.
Jordan Hall Steam and Chilled Water Service Lines, North Carolina State
University, Raleigh, NC - Civil Engineer responsible for designing and
routing proposed steam and condensate service lines, and the Chilled Water
Supply and Return Lines for the new Jordan Hall Building addition, along
with coordinating the design with our structural and infrastructure
departments. I also had to coordinate this project with the design for the
proposed Chilled Water Supply and Return Lines from the Cates Plant to
serve this area of campus that I was simultaneously designing (see next
project).
North Chiller Plant - Phase 3A - Piping to Jordan Hall, North Carolina
State University, Raleigh, NC - Civil Engineer responsible for the complete
design plans and specifications for the extension of new 16", 12" and 10"
chilled water supply and return (CHWS&R) lines to serve a section of the
NCSU campus south of the proposed Cates Chiller Plant expansion, which
includes approximately 3200 LF of 16", 1400 LF of 12" and 300 LF of 10" &
6" chilled water piping, including all valves and appurtenances, along with
90 LF of 48" dry-bore-and-jack casing under Dan Allen Drive. Approximate
construction cost: $1.3 million. Designed in 2003 and constructed in 2004.
Indoor Air Quality Improvements - Phase III, North Carolina State
University - College of Veterinary Medicine, Raleigh, NC - Civil Engineer
responsible for re-routing proposed chilled water supply and return lines
into the existing CVM building, coordinating with the existing Steam and
Chilled Water Infrastructure Expansion Project, currently under
construction.
Physical and Life Sciences Building, Winston Salem State University,
Winston-Salem, NC - Civil Engineer responsible for re-designing and re-
routing proposed trenched steam and condensate service lines for the new
Physical and Life Sciences Building, and also to coordinate revisions with
our structural and infrastructure departments.
College of Veterinary Medicine (CVM) Infrastructure Expansion, North
Carolina State University - College of Veterinary Medicine, Raleigh, NC -
Local Civil Engineer assisting Construction Manager with civil CA issues.
Bocock-Stroud Building Utilities, Wake Forest University, Winston-Salem, NC
- Civil Engineer responsible for the site / civil designs related to this
building renovation, including new sanitary sewer and potable water
services, a natural gas service line, storm drainage, and earthwork. (This
work was done as a 'sub' under the Architect's design scope, and I have no
data on the construction dates or costs.)
New Science Building, North Carolina Central University, Durham, NC - Civil
Engineer responsible for designing and routing proposed telecom ductbank.
New Science Building, Fayetteville State University, Fayetteville, NC -
Civil Engineer responsible for re-designing and re-routing proposed telecom
ductbank and a gas line in connection with the new Science Building.
NCSA Ductbank Redesign, Duda/Paine Architects, Raleigh, NC - Civil Engineer
responsible for re-designing and re-routing proposed telecom ductbank at
the N. C. School of the Arts.
Broughton Hall Laboratory Renovations, North Carolina State University,
Raleigh, NC - Civil Engineer responsible for resolving the location of the
new chilled water supply and return (CHWS&R) lines from new lines under
construction to serve the previously non-chilled building. Broughton Hall
had numerous exterior physical restraints to the service location, such as
railroad right-of-way, physical topographic and structural restraints,
along with conflicts with existing utilities.
Gove Health Center Addition & Renovation, University of North Carolina at
Greensboro, Greensboro, NC - Civil Engineer responsible for the design
plans and specifications for the direct-bury 4" high-pressure steam and 2"
condensate return lines to serve the new Gove Health Center Addition.
Steam Distribution Loop Reconstruction, Appalachian State University,
Boone, NC - Civil Engineer responsible for the design plans and
specifications for 8" high-pressure steam and 4" condensate return lines in
a concrete trench for replacing outdated, asbestos-laden lines and
deteriorating manholes which are a part of the main steam loop in the
central part of campus. The Mechanical Department designed the steam
manholes for the project. This project also included relocation of existing
utilities, the crossing of an existing creek on campus, and working within
NCDOT right-of-way. This project also had to be coordinated with the New
Rankin Annex that was under construction, along with the demolition and re-
building of another part of the Rankin Science Building.
Design of Phase III Campus Utility Plan - New Cates Chiller Plant, North
Carolina State University, Raleigh, NC -
Civil Engineer responsible for all site / civil designs related to this
plant expansion, including sanitary sewer, potable water, storm drainage,
30" chilled water supply and return (CHWS&R) lines, a relocated pressure
condensate return line, numerous power duct banks, including 70 LF of 18"
dry-bore-and-jack casing under Cates Ave.
Infrastructure Site Upgrades - Phase 1A, Winston Salem State University,
Winston-Salem, NC - Civil Engineer responsible for the design plans and
specifications for the extension of new 10" and 4" direct-bury chilled
water supply and return (CHWS&R) lines to serve a section of the WSSU
campus from the new chiller plant.
Quad Steam and Chilled Water Lines, Mann & Burlington Halls Chilled Water
Tie-ins, and the Brickyard Chilled Water Loop, North Carolina State
University, Raleigh, NC - Civil Engineer responsible for the design plans
and specifications for direct-bury 8" high-pressure steam and 4" condensate
return lines, along with new 8" chilled water supply and return (CHWS&R)
lines to supply the Quad (Berry, Becton & Bagwell dorms, the chilled water
tie-ins for Mann & Burlington Halls, and the completion of the chilled
water supply and return lines loop for central campus that runs through the
'Brickyard' over to Kilgore Hall. The projected construction cost totals
$825,000.
Steam and Condensate Distribution Repairs - Phase III, Appalachian State
University, Boone, NC - Civil Engineer responsible for the design plans and
specifications for direct-bury 8" high-pressure steam and 4" condensate
return lines, along with smaller building service lines, for replacing
outdated, asbestos-laden lines and deteriorating manholes which are a part
of the main steam loop in the central part of campus. The Mechanical
Department designed the steam manholes for the project. This project also
includes approximately 65 LF of 48" dry-bore-and-jack of the steam and
condensate lines to minimize damage to a 30" Beech tree and the Dougherty
Administration Building. This project is also being coordinated with
numerous other building renovation projects being performed at the same
time. Constructed in 2005 / 2006. Construction cost was $2.2 million.
Steam Plant Upgrades and Energy Efficiency Improvements - Phase 1,
University of North Carolina at Greensboro, Greensboro, NC - Civil Engineer
responsible for the relocation of existing utilities for the Steam plant
upgrades, along with assist in the design of the additional underground
fuel storage tank.
Phase II of Steam System Upgrade, Appalachian State University, Boone, NC -
My involvement in this project was assisting Project Manager with some CA
issues.
Water and Sewer Improvements, Mount Olive College, Mount Olive, NC - Civil
Engineer responsible for the design plans and specifications for the
installation of new water and sewer mains, re-routing existing service
laterals to the new lines, establish new service laterals for the proposed
facilities, locate two new PRV vaults to provide higher water pressure on
campus, and install a new sewer lift station and a short run of force main
to tie into an existing outfall of the Town of Mount Olive. The projected
construction cost totals $615,000.
PRIVATE DEVELOPMENT:
Flaherty Farms Subdivision and Multi-Family Development, Wake Forest, NC -
Project Design Engineer for the preparation of civil/site plans associated
with a 120-lot subdivision and an adjacent multi-family housing development
on a 64-acre site. My responsibilities included the designing of or
overseeing the design of the water and sewer utilities, roadways and storm
drainage, producing design drawings, obtaining permits and coordinating
work with the developers. In conjunction with this project we had to
design an off-site 15" sanitary sewer outfall to serve this site by gravity
sewer to the Town.
"The Crescent" Golf Course and Subdivision, Salisbury, NC - Project Design
Engineer for the preparation of civil/site plans associated with an 18-hole
golf course and 200-plus lot subdivision associated with the golf course on
a 420-acre site. My responsibilities included the designing of or
overseeing the design of the water and sewer utilities, roadways and storm
drainage, producing design drawings, obtaining permits and coordinating
work with the golf course developers. In conjunction with this project I
had to design an upgraded parallel sanitary sewer outfall to serve this
site and to replace the existing outfall that was undersized and had a
serious infiltration/inflow problem for the City of Salisbury.
West Station Trade Center - Commercial Development, Garner, NC - Design
Engineer responsible for the design, engineering plans, specifications and
permits for a 45-unit office condominium development. The design included
building layout, site grading, water and sewer utilities and a unique
stormwater bio-retention area on-site. The site's original terrain led to
some interesting grading challenges in the drive and parking areas, but we
attained a grading balance, without excessive grades in the paved areas.
Eastpark Development, Raleigh, NC - Poole Road and New Hope Road east of
Raleigh, Design Engineer responsible for the Phase III engineering plans
for an 8" and 10" sanitary sewer outfall, sewage lift station and force
main, along with laying out subdivision streets, utilities and storm
drainage.
River Ridge Golf Course and Subdivision, Raleigh, NC - Design Engineer for
the design of individual and collector pressure sewer services to serve
over a dozen lots that could not be served with gravity sewer, including
individual grinder pumps and cans, individual 1-1/4" force mains, and some
of the lots fed to a 2" pressure header, discharging to a public manhole.
Coastal Residential Development, Dare County, NC - Design Engineer
responsible for all engineering design and permit acquisitions associated
with two 200-lot phases and one 250-lot phase of residential development, a
50-lot phase of another, along with three package wastewater treatment
plants with land application.
Residential Sewage Extension, Raleigh, NC - Design Engineer for the Sendero
Subdivision Sanitary Sewer Extension which included extending the City of
Raleigh's sewer utilities up Sendero Drive from an outfall to serve
existing residences.
Residential Development, Wake Forest, NC - Project Engineer responsible for
the design of water and sanitary sewer utilities for The Mews at Franklin
Greene, a 110-unit townhome development for Parker-Lancaster & Orleans
developers.
Keystone Technology Park, Durham, NC - Project Engineer responsible for
the preparation of civil/site plans associated with four phases of a
commercial development on a 31-acre site. My responsibilities included
design of water and sewer utilities along with storm drainage design. I
coordinated the design with the Owner and Landscape Architect during
Durham's review process to obtain necessary approvals. I also secured the
necessary driveway and encroachment permits from NCDOT and stormwater
management permit required from Durham.
Mixed Use Development, Columbia, SC - Design engineer for preliminary
layout for a multi-family / commercial site, including water and sanitary
sewer utilities and storm drainage.
Laurens Site No. 1, Laurens, SC - Project Design Engineer for the
preparation of civil/site plans associated with a 18,700 square foot retail
development on a two-acre site. My responsibilities included parking lot
layout and design, utilities grading and drainage as well as review during
plan development. I also secured the necessary encroachment permit from
SCDOT and stormwater management permit required from DHEC.
Lauren's Site No. 3, Laurens, SC - Project Design Engineer for the
preparation of civil/site plans associated with a 33,570 square foot retail
development on a four-acre site. My responsibilities included parking lot
layout and design, utilities grading and drainage as well as review during
plan development. I also secured the necessary encroachment permit from
SCDOT and stormwater management permit required from DHEC.
Residential Development, Wake Forest, NC - Project Engineer responsible for
complete engineering plans for the final 84-lot phase of the Staffordshire
single-family development including street and lot layout, all water and
sanitary sewer utility designs, storm drainage and erosion control,
including all permits. I also coordinated the design with the Contractor,
making some field adjustments as necessary.
As-Built Plan Preparation, Wake Forest, NC - Engineer responsible for the
researching and developing as-built plans for the water, sewer and storm
drain utilities of the existing three-phase part of the Staffordshire
single-family development for the Town of Wake Forest, NC. This including
coordination surveying efforts to triangulate the locations of all visible
utilities, and measure all inverts for sewer as-builts.
Residential Development, Fayetteville, NC - Project Engineer responsible
for the design of water and sanitary sewer utilities, storm drainage,
roadway and site development for a 144-unit multi-family apartment
development on 14.5 acres called Autumn View Apartments.
Commercial Utilities, Wake Forest, NC - Design Engineer responsible for the
design, engineering plans, specifications and permits for the installation
of a grinder sewage lift station and force main for Marshall Oil Company in
Wake Forest, NC.
Residential Development, Newberry, SC - Project Engineer responsible for
the design of water and sanitary sewer utilities, storm drainage, roadway
and site development for a 48-unit multi-family apartment development on
5.5 acres called Palmetto Pointe Apartments.
Pirate's Cove Coastal Resort & Marina, Manteo, NC - Project Engineer
responsible for all engineering work on Phase I of the new Pirate's Cove
resort. Responsibilities included design of all water and sanitary sewer
utilities, including extending public water from Manteo, on-site sewage
lift station and running sewage force main back to Manteo, acquisition of
permits, construction estimates and coordination of materials acquisition
for utility construction, and site inspection for the installation of the
utilities.
Residential Development, Wake Forest, NC - Project Engineer responsible for
the design of water and sanitary sewer utilities, storm drainage, roadway
and site development for a 90-unit multi-family development.
Private Development, Fuquay-Varina, NC - Project Engineer responsible for
the design, engineering plans, specifications and permits for the
replacement and expansion of wells and community water system for a private
mobile home park near Fuquay-Varina, NC.
Contact this candidate