Project Manager Quality Control
Resume:
Maintenance Manager
To whom it may concern,
I am submitting my resume for “ Maintenance Manager “ position that was
listed with the Job.com.
I believe that I could be a great asset to your company. With experience as
Project Manager/Superintendent with Diamond Key Builders, LLC. There I was
working with Realtors, Home owners, Subcontractors, and Suppliers as each project
progressed to ensure that they would be finished in a timely manner.
Over see projects by; attain building permits, attain water meters, ordering
materials, scheduling subcontractors, and ensuring any change orders have been
taken care of by subs. Ability to read and understand job plans for each project, with
the ability to communicate to subcontractors as to what is needed to complete their
tasks.
I’d like the opportunity to show how you can put my experience to work for
you. Please call anytime should you have any questions, 541-***-****.
Sincerely,
John Gottlieb Jr.
John Gottlieb Jr.
11911 Finley Ct.
Klamath Falls, Oregon, 97603
Pg. 1
John Gottlieb Jr.
11911 Finley Ct., Klamath Falls, Oregon 97603
Employment History:
Retail Project Merchandiser:
Advantage Sales & Marketing LLC
PO Box 66010
Anaheim, California 92816
Angela Meyer
360-***-**** (O)
858-***-**** (F)
******.*****@******.***
Years Employed ( October, 2010 - Present )
I would check website to see if there is any opportunities that I would need to schedule. If
there is, I would schedule them on to task calendar. Check to see what documents need to be
downloaded to complete that task. Then go to retailer, meet with store manager or department
head. Explain reason for calling on them. Then complete task as described per call report. When
finished would go online to finish report and any evidence that is needed. Also would fax call
report to company.
Center Pivot Service Tech:
JW Kerns, Inc.
4360 Highway 39
Klamath Falls, Oregon 97603-9652
Mike McAuliffe, 541-***-****
Years Employed ( May, 2007 - July, 2009 )
Was trained to troubleshoot problems that occurred on irrigation center pivots machines,
whether they were electrical, mechanical, & irrigation. Customers would call in with problems
Pg. 2
with their machine, I would then be dispatched to check out their machine and repair anything
that might need to be fixed. I would also pull any parts that might be needed to repair it. I have
the capability to read wiring diagrams to troubleshoot electrical problems. Would also do fall
winterization of machines at the end of the season.
After new machine had been erected, I would hook up all electrical connections to make
machine operate, which included: wiring in control panel, wiring the collector ring, tower
boxes, drive motors, booster pump, and any other options that the customer should order.
It was my responsibility for keeping up on maintenance service truck, inventory of
service truck, pulling parts for special orders, and filling out service orders sheets; which
included hours and parts used. I used a Valley® parts list software to make new labels, re-label,
and organized parts area for the service department. Also helped with year end inventory.
January of 2009, I was sent to service school in Denver, for four days.
Project Manager / Foreman:
Titan Builders, LLC
5065 Southview Dr.
Klamath Falls, Oregon 97603
Derek Grether, 541-***-****
Years Employed ( April, 2006 - January, 2007 )
Did framing and pickup work as needed per house.
Ability to read and understand job plans for each project, with the ability to communicate
to employees as to what is needed to complete their tasks. Keep crew working with the least
amount of down time. Ensure that materials are on job site or that they have been ordered.
Make sure of any changes on project, so that they can be taken care of in a timely manner.
Quality control when framing homes to meet building codes, specifications of plans, and
quality that employer requires.
Oversee general housekeeping and safety of job site.
SUPERINTENDENT / PROJECT MANAGER:
Diamond Key Builders, LLC
135 Pine Lake Dr.
Eagle Point, Oregon 97524
George Gardner, 541-***-****
Years Employed ( November, 2005 - April, 2006 )
Pg. 3
Working with Realtors, Home owners, Subcontractors, and Suppliers as each project
progressed to ensure that they would be finished in a timely manner.
Over see projects by; attain building permits, attain water meters, ordering materials,
scheduling subcontractors, and ensuring any change orders have been taken care of by subs.
Ability to read and understand job plans for each project, with the ability to communicate to
subcontractors as to what is needed to complete their tasks.
Quality control of homes to meet building codes, specification of plans, and quality that
employer and homeowners requires.
Over seeing general housekeeping and safety of job sites and project.
Used computer to do scheduling, kept log of materials ordered, and task log and
schedule for each subcontractor.
GENERAL CONTRACTOR / OWNER:
Do It All Construction & Services
11911 Finley Ct.
Klamath Falls, Oregon, 97603
John Gottlieb Jr., 541-***-****
Years Employed ( November, 2003 - April, 2006 )
As a licensed and bonded, General Contractor. I did all types of construction including;
remodel, new construction, and repair. I worked with homeowner to design, build from plans,
attain proper permits for each project, and manage the progression of each project to ensure that
they would be finished in a timely manner.
If subcontractors were to be used, I make sure that they licensed and properly bonded.
Scheduling subcontractors, with the ability to communicate to subcontractors as to what is
needed to complete their tasks, and ensuring any change orders have been discussed with them
and have been taken care of by subs.
Quality control of each project to meet building codes, specification of plans, and quality
homeowners required. Over seeing general housekeeping and safety of job sites and project.
With basic computer knowledge used Windows programs, including MS Word,
Construction Estimator, and Quicken. With these computer programs it made it possible to do
estimates, contracts, material lists, invoices, and book keeping.
I was licensed manufactured dwelling installer. With a knowledge of manufactured
dwelling construction.
Pg. 4
FOREMAN / FRAMER:
Solid Builders, LLC
4306 Delaware Ave.
Klamath Falls, Oregon, 97603
Dan Crapo, 541-***-****
Years Employed ( August, 2002 - November, 2003 )
Did framing and pick up work as needed per house.
Ability to read and understand job plans for each project, with the ability to
communicate to employees as to what is needed to complete their tasks. Keep crew working
with the least amount of down time. Ensure that materials are on job site or that they have been
ordered. Make sure of any changes on project, so that can be taken care of in a timely manner.
Quality control when framing homes to meet building codes, specification of plans, and
quality that employer requires.
Over see general housekeeping and safety of job site.
GENERAL CONTRACTOR / OWNER:
Do It All Construction & Services
11911 Finley Ct.
Klamath Falls, Oregon, 97603
John Gottlieb Jr., 541-***-****
Years Employed ( July, 1999 - August, 2002 )
As a licensed and bonded, General Contractor. I did all types of construction including;
remodel, new construction, and repair. I worked with homeowner to design, build from plans,
attain proper permits for each project, and manage the progression of each project to ensure that
they would be finished in a timely manner.
If subcontractors were to be used, I make sure that they licensed and properly bonded.
Scheduling subcontractors, with the ability to communicate to subcontractors as to what is
needed to complete their tasks, and ensuring any change orders have been discussed with them
and have been taken care of by subs.
Quality control of each project to meet building codes, specification of plans, and quality
homeowners required. Over seeing general housekeeping and safety of job sites and project.
With basic computer knowledge used Windows programs, including MS Word,
Construction Estimator, and Quicken. With these computer programs it made it possible to do
estimates, contracts, material lists, invoices, and book keeping.
Pg. 5
I was licensed manufactured dwelling installer. With a knowledge of manufactured dwelling
construction.
Jeld-Wen of Oregon
3307 Lakeport Blvd.
Klamath Falls, Oregon, 97601
Andy Martisak, 541-***-****
Years Employed ( June, 1978 - July, 1999 )
Resaw Oper.:
Set-up and operate Resaw for incoming material to specifications for each run for
that shift. Was able to do routine maintenance and repairs all machine that I operated.
VENEER SPLICER OPER.:
Set-up and operate Veneer Splicer to glue veneer skins to specifications for each
run for that shift. Was able to do routine maintenance and repairs all machine that I
operated.
PRIMER OPER.:
Set-up and operate Primer to prime material to specifications for each run for that
shift. Was able to do routine maintenance and repairs all machine that I operated.
MOULDER OPER.:
Set-up and operate Moulder to machine wood material to specifications for each
run for that shift. Was able to do routine maintenance and repairs all machine that I
operated.
CARLOADER:
Load and unload material from railcars, flatbed trucks and, van truck / trailers.
Would also pull item from on hand inventory to fill orders on to pallets with the use of
pallet jacks or forklift. As material was loaded or unloaded a tally would be kept either
by tally tickets or bar code tickets being scanned. Scanned inventory would be down
loaded into the computer and generate a load tally of material. Was able on locate
material in computer program to print out proper bar code tickets for each item. Helped
to do to end of month inventory. Hazardous Material training to have the knowledge to
understand how to read MSD sheets for labeling, handling, storage, and shipping of
these items.
MILLWRIGHT:
Also was in charge of maintaining machines and equipment for the department
that I worked in. When machines would break down, would be responsible to do repairs.
Pg. 6
If new machinery was needed, would work with supervisor and as to what would be
needed, draw it up, order materials, and start fabrication of that machinery or other things
that were needed.
Education:
Klamath Union High School
1300 Monclaire Str., Klamath Falls, Oregon 97601
Years attended 1976 - 1978
Worked as student aid in Metals and Auto Shop classes. Enjoyed Woodworking class.
CCB
Salem, Oregon.
General Contractor license.
Codes Division
Salem, Oregon.
Manufactured Dwelling Installers license.
Valley Service School
Denver, Colorado.
Year attended 2009.
Center pivot and linear service school.
Skills:
Computer:
Basic computer knowledge with Windows programs including; MS Word,
Outlook. Other programs, Construction Estimator & Quicken.
Construction:
Ability to read and understand job plans for each project. Skills in framing, truss
layout, stairs, sheet rock, tape & texture, paint, cabinets, and trim carpentry.
Electrical:
Ability to read wiring diagrams. Able to use test meter to check continuity,
voltage, & ohm checks. As well as troubleshooting.
Pg. 7
Equipment:
Skilled in the operation Loader / Backhoe for leveling & trenching. Ability to
operate Dozer for grading. Can set-up & operate laser level for grading & leveling.
Fabrication:
Ability to read and understand job plans for fabrication of each project. Welding
knowledge of stick, mig, & gas in fabrication. Skills in sheet metal forming, and basic
painting with airless or spray gun applications.
Mechanical:
Knowledge of automotive, basic diesel, and preventive maintenance.
References:
Pat Purves
3818 Thicket Ct., Klamath Falls, Oregon 97601
Cobbler
Years known: 33
David Cillis
3467 Cougar Butte, Klamath Falls, Oregon 97601
Mill Worker
Years known: 34
Darrel Terrell
1844 Etna St., Klamath Falls, Oregon 97603
Supervisor
Years known: 8
Pg. 8
Contact this candidate