[pic]

Arturo Edwin A. Torres Jr

*** ****** ** *** ** BROOKLYN NEW YORK 11237 USA

Tel.No. +1-347-***-**** (USA)

E-mail Address: abhtv9@r.postjobfree.com

Current Position

ELECTRICAL ENGINEERING DESIGNER

Career Summary

. Experienced in Oil and Gas fabrication design engineering

and management, expertise on electrical systems in

compliance with governing bodies of Codes and Standards,

Client Approved for Construction Drawings and

Specifications.

. Experienced with Con Edison's (New York Power Utility)

various Projects, standards, requirements, policies, and

procedures as well as the various systems used such as

Metaphase, WARS, etc.

. Experienced as Electrical Engineer / Senior Technical

Assistant

. Experienced as Operation and Maintenance of Electrical

Equipment for Semi- Conductor Company (Clean Room)

Education

Bachelor of Science Major in Electrical Engineering

Adamson University, Manila 1993

Statement of Qualifications

Experience in Fabrication Design Engineering and Project Management of

different Oil and Gas Platforms these are Wellhead, Drilling

Platform, Topsides, FPSO and Semi Floating Platform Production Unit /

Tension Leg (SFPS- HULL and TOPSIDES) for major players in Oil and Gas

industry like Sarawak Shell Sdn Bhd, Shell International Exploration

and Production Inc., Malaysia Deep Floating Terminal /Murphy Oil and

Petronas Carigali Inc. Major Field of expertise on Fabrication

Engineering detail design of electrical systems for Constructions with

reference to major governing Codes and Standards (IEC, NEC, and DNV).

Execute the duties of Lead engineer for EPC and EPCC projects with

involvement in offshore HUC activities. Experience with Con Edison

(New York Power Utility) requirements, policies, procedure including

Metaphase and WARS System.

Well developed communication skills and proficient with major computer

software applications (MS EXCEL, Word, AUTOCAD)

Experience

2009- Present Rudell and Associates (New York City, USA)

Electrical Designer

. Verified Red Lined / As-Built mark ups done by Con Edison's (New

York City Power Utility) PST and Construction Team to latest issued

drawings. Update affected drawings. Checked wiring connections and

updated wiring revision point to point connections using WARS

System. Update drawings in the METAPHASE.

. Replacement of OCB 138kV Breaker 3 at Hudson Ave East Substation

with New 145kV, 63KA, 3000A type PM-HM-1.5 MECH ABB SF6 - Prepared

removal and installation wiring packages including WARS Update-

Verified Sketch and scope provided by Con Edison, Verified all

affected drawings and prepared removal drawings and marked as IC

drawings. Prepared wiring installation of new Power and Transient

Meter (Nexus 1500), Lock- out Relay (LOR), new power supply DC and

AC from load boards (1st and 2nd Line Protection for physically and

electrically separation). Incorporated new Circuit Breaker (ABB

Vendor drawings) circuitry to existing Disconnect Switches 3-2 and

3-3 and supervisory panel. Updated all affected drawings. Done as

built as per Red lined mark ups. Update drawings in the METAPHASE.

. Phases 3 & 4 of Research, Verify, Compare, Revise and Provide

Station Core Drawings for various (10) Con

Edison Stations- Verified High Tension Operating Devices (HTOD),

One Line, Simplified, Three Line and Schematics and General

Arrangement drawings, as per latest issued drawings and Update

drawings as per

Matrix submitted to Con Edison. Update drawings in the

METAPHASE.

. Washington Substation DTT reliability Project (On-going /

preliminary) -

Prepared removal and installation wiring packages including WARS

Update; - Prepared removal packages of existing Automatic Ground

Switch (AGS) and installation of new Circuit Switcher with

Interrupter and new Digital transfer trip (DTT) protection for

Washington's Transformer 3 for FDR'S 38M03 and 38M10. Update

drawings in the METAPHASE.

2005-2009 Malaysia Marine and Heavy Engineering Sdn. Bhd

Lead Electrical Design Engineer

. Performed the duties of Lead Discipline Engineer.

. Supervised and check generation of drawings for fabrication and

ensured scheduled release of documents to site team.

. Checked and incorporated updated vendor documents to Issued for

Construction documents (wiring diagrams, termination drawings,

Layout.)

. Prepared schedule of Deliverables (Documents) for EPC projects.

. Chaired regular progress meetings with clients and project

management team (PMT) on project progress and other concerns.

. Identified variations from Issued for Bid (IFB) and Approved for

Construction (AFC) documents.

. Performed Technical Requisition for Procurement and Technical

Bid Evaluation (TBE) of various electrical packages and

materials including Vendor Data Review and Incorporations.

. Responsible for the preparation of technical correspondence to

clients and Sub-contractors

. Conducted regular site visits and identified areas of concern

and recommended course of actions.

. Coordinated with tie-up consultants and clients on EPCC projects

regarding evaluations of electrical packages and deliverables.

. Generate activity schedule and deliverable submittals schedules

based on updated Planning package

. Liaise w/ client and Project Management Team on project progress

and priorities.

. Checked As-Built Documents

Projects: As Lead Engineer

. Ledang Anoa Unmanned Drilling Platform / PCSB (2005)- EPCC

. SCDR-A Drilling Platform / Sarawak Shell Sdn. Bhd ( 2007) - EPC

. B11 KA Topsides / Sarawak Shell Sdn. Bhd ( March 2008 - October

2009) - EPC

. Gumusut Kakap - Semi Floating Platform Floating Terminals /

Tension Leg Platform Sabah Shell Petroleum Terminals / Shell

International Exploration and Production Inc

(2006 - 2009). EPCIC (Project still on-going as to date)

Electrical Design Engineer

. Responsible for detail engineering works which includes the

development and checking of fabrication drawings (Layouts,

Routings Wiring, Terminations from Approved for Construction

(AFC) and vendor documents from client for site fabrication.

. Prepared Technical Bid Evaluations (TBE) for the various

electrical packages (MCC /IMCS, Distribution Boards, Heat

Tracing Distribution Boards, UPS Systems, Navigational Aid

system, lighting fixtures

. Performed Inter-discipline Clash Checks of layout drawings prior

to issuance to site to minimize field reworks and modifications.

. Initiated and conducted Clarification meetings with vendors on

matters pertaining to compliances and deviations from Client's

specifications.

. Prepared As-Built documents.

. Prepared Cable Cutting List for cable drum assignment and Weight

Control Report (WCR)

. Coordinated with the Project Management Team and Sub Contractors

on matters concerning job progress and priorities.

. Prepared Material Take Off and Procurement Requests as well as

estimates for electrical materials and Variation Orders

Projects:

. FPSO - Kikeh Murphy Sabah Oil / Malaysia Deepwater Floating

Terminals ( 2006)

2003 - 2005 Brunei Shell Petroleum Company Sdn. Bhd

Electrical Engineer - Technical Support

Electrical Infrastructure Integrity Projects

Power, Utilities & Maintenance

Electrical Distribution Department

Brunei - Shell

. Review Specification (TBE) of Tender Offered / bids / quotation

for Electrical Equipment RMU, Transformer, HV / LV Cables,

Switchboard / IMCS if conforming to DEP, Local Standard Practice

and other relevant codes. Conducted Distribution Load Studies

thus cable load analysis, voltage drops including sizing of

transformers.

. Report Directly to Department Section Head (PPA/1) for Contract

Issues and Provide Site Specification Report for work done by

Sub Contractors.

. Factory visits (FAT) for machineries / equipment prior to

delivery if conforming to Brunei Shell specified specification.

. Review Project proposal and issued corresponding comment to

Brunei Shell Department Section Head (PPA/1) before project

approval of Management hierarchy.

. Develop Project Execution Plan (PEP), Scope of Works and

Schedule of Price for upcoming project.

. Coordinate with Brunei Shell Technical Authorities for

Electrical Engineering quires as well as clarifications of

specification and design prior to procurement.

. Estimate value of contract by raising Bill of Quantities prior

to approval of Management hierarchy.

. Done cost analysis for the upcoming projects including provision

of supply by the COMPANY and CONTRACTOR.

AUTHORIZATION: Brunei -Shell Authorized Electrical Person (AEP - Category

B) - On Shore Facilities Single Circuit.

Projects:

. BI : 9138 Panaga Electrification Infrastructure Upgrade Projects

. BI 9439 Replacement of RMU /Switchboard and Transformers /

Upgrade.

. BI: 9283 33 kV Badas Overhead Line Replacement to UG Underground

Cable System.

. BI: 9284 66 kV Overhead Line Inspection and Maintenance.

. BI: 9105 MIS 33 kV Switchboard Replacement / F23 Substation

Upgrade.

2001 - 2003 Ninoy Aquino International Airport Terminal III, Manila

Philippines

Electrical Engineer

Facilities, Maintenance and Engineering Department.

. As part of owner monitor construction progress if

conforming to owner's specification.

. Report directly to consultant side if General contractor

not following what is agreed upon on contract and to issue site

inspection report officially.

. Routine Site inspection and reviewed methodology procedure

of construction if conforming to Electrical code.

. Site or factory visits for machineries /equipment prior to

delivery if conforming to owner's specification.

. Review methodology of procedure in testing and

commissioning.

. Discuss outstanding item as part of owner side to

consultant side for revision or inclusion of procedure.

. Must attend witness and sign actual procedure as certified

that test was conducted in accordance what is agreed upon.

Technician III - Shift / Operation

Facilities and Engineering

1998- 2001 Team Pacific Corporation, Philippines

9 Electrical and Building layout for proposes electrical projects.

. Electrical Sizing and Calculation.

10 Wiring requirements (design/method/materials)

. Maintenance of Low voltage switchgears, capacitor banks and

Transformers.

. Maintenance of Motor control center and auxiliary branches.

. Maintenance of ATS /MTS switching on emergency power for 2

units of generator sets (1825kw/1000kw)

12 Caterpillar as main backup and 3 units 500 kW Cummins generator as

standby (MTS).

. Perform daily check on parameters.

Maintenance and directly responsible for the ff. equipment

. Monitor and maintain operation parameter for three units of 120 TR and

three units of 80 TR Chiller Compressors (Carrier).

. Air handling Units (AHU).

. Several rated Air compressors 75 hp Quincy, 200 hp and 250 hp Sulair

compressor.

. Centrifugal pumps (chilled /condenser/circulating), vacuum pumps,

cooling towers.

. Fire engines and jockey pumps.

. Regenerated air dryer (SAR-1000 ABB)

. Motor Control Center.

Technician III - Preventive Maintenance

Facilities and Engineering

1997- 1999 Team Pacific Corporation, Philippines

. Perform routine preventive maintenance of facilities equipment as per

schedule.

. Update all equipment history records based on scheduled frequency with

zero discrepancy.

. Determine fast moving parts of equipment and recommended ideal stock

inventory.

. Execute immediate corrective actions on any detected fault found

during preventive maintenance.

. Initiate equipment performance upgrading and cost improvement project.

Monitor and update consumption of utility supply like nitrogen

. Hydrogen gases, de-ionized water and raw water.

. Preventive Maintenance of window/package type aircon.

. Attend on line sustaining calls at WASTE WATER TREATMENT PLANT.

This includes,

. Automated pH analyzer/controller and sensor probe.

. Automated chemical dosing pump, transfer pump and agitator.

. Routine inspection from power generating plant to utilization

equipment.

Maintenance Engineer

Plant Engineering Paint Shop and Body Built Section

1995 - 1997 COLUMBIAN MOTORS CORP.

1. Directly responsible for the repair installation, assembling and

preventive maintenance inspection and servicing of complex critical

machineries, equipment and other facilities in Paint shop Section.

2. Handles all electromechanical work at Paint shop Section's Oven booth

and spray booth including gas feed oven, sealer pumps, sealer guns and

spray guns.

3. Handles air supply motors, exhaust fans, entry/exit seal fans,

recirculation pumps and all industrial motors, controller and operation

at oven booth and spray booth.

Personal Reference

Place of Birth : Lucena City, Philippines

Civil Status : Married

Nationality : Filipino

Languages : English, Pilipino and Bahasa Malayo

(moderate)

Contact this candidate