ARUN
K MENON
*****, ******* ******, *******, ** 32826 Phone: 407-
***-**** *****:abhss5@r.postjobfree.com
OBJECTIVE: To obtain a challenging Metallurgical Engineer position
in a dynamic organization where my 5-6 years experience in
research, development and production of new materials will increase
the efficiency in new product development
EDUCATION:
. MS- Material Science Engineering, University of Central
Florida, FL (Thesis Option) (GPA : 3.2)
. BS- Metallurgy & Material Science Engineering, Jawaharlal Nehru
Technological University, India (GPA : 3.9)
Relevant Courses: Physical Metallurgy, Non-Ferrous Extractive
Metallurgy, Foundry Technology, Powder Metallurgy, Mineral Dressing,
Heat-treatment techniques, Thermodynamics, Materials
Characterization techniques, Six Sigma tech
PROFESSIONAL SKILLS:
> Metallography: Metallographic sample preparation through rough
grinding, mounting, disc polishing, electro-polishing,
electro-etching, chemical metal etching, optical microscopic
analysis, result interpretation and report preparations
> Material Characterization Techniques: Scanning Electron microscopy
(SEM), Energy Dispersive Spectrum(EDS), X-ray Diffraction (XRD),
Optical Microscopy, X-ray Photoelectron Spectroscopy (XPS), Raman
Spectroscopy, Differential Scanning Calorimetry (DSC), Fourier
Transform Infrared Spectroscopy (FTIR), Transmission Electron
Microscopy (TEM)
> Materials Testing & Failure Analysis: INSTRON tester for Tensile,
Compression, Flexural testing, Hardness testing using Vickers,
Rockwell's, Brinell testers, Creep, Fatigue Testers, Impact
testing, Failure Analysis, Fractography
> Metallurgical Equipments: Heat-treatment & melting furnaces, Black
Smithy tools, Foundry tools, Welders, Ball-Millers, Hot & Cold
Isostatic Presses, Uniaxial powder presses, Metrology tools, Au-Pd
coaters, Ultrasonic Cleaners, etc
> Metallurgical Laboratories: Physical Metallurgy, Metallurgical
Analysis, Mineral Dressing, Heat-treatment, Mechanical Metallurgy,
Foundry, Mechanical Working of Materials, Powder Metallurgy,
Electrometallurgy, Metallurgical Computations
PROFESSIONAL EXPERIENCE:
Mishra Dhatu Nigam Limited (MIDHANI) - Hyderabad, India (MATERIALS
ENGINEER) Dec 2003 - Dec 2006
. Improved the stress rupture properties of super-alloys used in
turbines up to 19% through improved processing routes
. Increased the efficiency of metallographic sample preparation
controlling grinding force, speed and other parameters
. Controlled the formation of undesirable phases in super-alloys,
which adversely affects their mechanical properties
. Improved the high temperature creep strength of Inconel 718
upto 11% through specially controlled heat treatments
. Supervised more than 30 interns for carrying out their under-
graduate project works.
Bharat Heavy Electricals Limited (BHEL) - Hyderabad, India (CERAMIC
ENGINEER) June 2001 - Nov 2003
. Improved the process efficiency in fabrication of Al2O3.MgO
spinel upto 14% through hot isostatic pressing (HIP)
. Documented dolomite refractory manufacturing process and
suggested techniques to improve production
PROFESSIONAL INTERNSHIPS:
Regional Centre for Military Airworthiness (RCMA) - Hyderabad, India
May 2005-July 2005
. Devised heat-treatment procedures that improved mechanical
properties of titanium(biomedical) alloys up to 17%
. Enhanced the micro-structural stability of turbine-blade alloys
through self-designed specialized processing techniques
Vizag Steel Plant (VSP) - Vishakapatnam, India
Oct 2004
. Well-trained in functioning of blast furnaces, sinter machines,
charging principles of steel making in Steel Melt Shop
. Structured processes to ensure operational excellence and
optimize productivity for producing quality steel at most
competitive lowest operational costs
ACADEMIC EXPERIENCE:
> Graduate Research Assistant - University of Central Florida,
FL Aug 2008 - Dec 2010
. Developed Sol-gel technique for the synthesis of
nanocrystalline titanium dioxide (titania)
. Achieved 15-20% increase in mechanical properties of pure
titania structures through metal oxide doping
. Strengthened the photocatalytic behavior of pure titania powder
up to 25% through Copper oxide doping
. Designed and characterized porous titanium dioxide scaffolds
for biomedical applications using Fused Deposition Modeling
. Performed statistical analysis techniques (SPC) like ANOVA and
Student's t-test for all the results of my MS Thesis
University of Central Florida (UCF) - Orlando, FL (MEMS Laboratory)
May 2008 - Aug 2008
Sputter deposited Ni-Ti (50:50) thin film shape memory alloy onto
silicon wafer in ultra high vacuum system
Performed reactive-ion etching onto the film surface to produce free-
standing Ni-Ti membrane
Fabricated Ni-Ti shape memory micro gripper using Focused Ion Beam
technique
University of Central Florida (UCF) - Orlando, FL (Composite
Fabrication Laboratory) Jan 2007 - Apr 2008
Synthesized Alumina-aluminium titanate-titania (composite) ceramic
through Sol-gel technique
Measured the dielectric constant of sintered structures using HP4284
using impedance-resistance-capacitance meter
Increased the dielectric constant of the composite up to 50% through
controlled sintering temperature and time
TEACHING EXPERIENCE:
> Graduate Teaching Assistant - University of Central Florida, FL
Jan 2007 - Present
. Instructed students and conducted labs for experimental techniques
in mechanics and materials using various techniques
like Hardness tests, Tensile and compression tests,
Metallography, Microscopy, X-Ray Diffraction, Heat treatment,
Hardenability determination by Jominy-End quench test, Raman
Spectroscopy, Differential Scanning Calorimetry
. Graded assignments, tests and acted as a backup lecturer for many
undergraduate courses, viz., Structure and properties of
materials, Experimental techniques in mechanics and materials,
Mechanical behavior of materials and Thermodynamics
PUBLICATIONS & PRESENTATIONS:
. Arun K Menon and Samar. J. Kalita, "Porous Scaffolds using
nanocrystalline titania for bone graft applications" accepted
for publication into Proc. of American Ceramic Society (ACERS)
2009
. Arun K Menon and Samar. J. Kalita, "Efficient photocatalytic
degradation of methylene blue with CuO doped nanocrystalline
TiO2" accepted for publication into Proc. of American Ceramic
Society (ACERS) 2009
. Arun K Menon and Samar. J. Kalita, "Pure and Mg/Zn/Si- doped
Nanocrystalline TiO2 through Sol-Gel processing", Poster
Presentation, Material Science & Technology (MS&T) '08,
Pittsburgh, PA, Oct'08
. Arun K Menon and Samar. J. Kalita, "Efficient photocatalytic
degradation of methylene blue with CuO doped nanocrystalline
TiO2", Oral Presentation, American Ceramic Society (ACERS)
Meeting, Daytona, FL, Jan'09
. Arun K Menon and Samar. J. Kalita, "Porous Scaffolds using
nanocrystalline titania for bone graft applications", Oral
Presentation, American Ceramic Society (ACERS) Meeting,
Daytona, FL, Jan'09
HONORS & ACHIEVEMENTS:
. General proficiency GOLD medal for securing highest aggregate
in my final year of under-graduation
. Tuition waiver (90%) and assistantship each semester throughout
my study at University of Central Florida (UCF)
. UCF Travel Fellowship & ASM Grant to attend Material Science &
Technology Conference, Pittsburgh, PA, Oct 2008
. UCF Student Government Association Travel Grant to attend ACERS
Conference, Daytona, FL, Jan 2009
PROFESSIONAL AFFILIATION & CERTIFICATIONS:
. Active member of ASM International (ASM), American Ceramic
Society (ACERS), Association for Iron and Steel
Technology (AIST), The Minerals, Metals and Materials Society
(TMS), Indian Society for technical Education (ISTE)
. Certified in Yellow Belt of Six Sigma Methodology (working
towards Green Belt Certification)
COMPUTER SKILLS:
. MS Word, Excel, Power point, 'C' programming, SQL, Basic, Math
lab, Minitab, Origin, EndNote, Statistical softwares, SEM
Imaging, JADE software, Instron software, Windows
98/XP/Vista/Seven, etc