Electrical Supervisor
Resume:
Resume’ of Qualifications
for
Anthony Jones
Resume’ Overview
Job Focus
I am very interested in a job with your company because it is one of the most respected names in the
industry. You are known to have a good wage and benefits package and are a stable force in American
business, something I look for in my employer. I know that I can make an important contribution to your
company’s growth with my years of experience and knowledge. My expertise in plant automation,
instrumentation and electricity, electronics, computers and software, equipment maintenance, and
process control, plus my desire to perform, makes me a valuable employee to any company.
Qualifications for Position
I am qualified for a position with you company in automation systems, instrumentation, and electrical
maintenance. I have been a PLC Systems Integrator for over 20 years designing, installing,
programming, commissioning and servicing PLC based control systems. I have worked as an
Industrial Electrician, Electrical and Instrumentation Technician, Electronics Field Serviceman,
and as an Electrical Maintenance Person. I have also worked as a PC Systems Technician,
Microsoft Software Specialist, and as a Control Panel Builder.
Licenses and Certifications
I am a licensed Arkansas Master Electrician and hold a State of Arkansas Electrical Contractors
license, during which time I worked in industrial, commercial and residential wiring. I have owned my
own businesses as an Allen Bradley Factory Authorized PLC Systems Integrator, and as a
Wonderware HMI Systems Integrator. I am a Certified Microsoft PC Systems Builder, PC
Refurbisher, and Software Salesperson.
Major Companies Worked For (most as a contractor)
I have worked as a contractor for Georgia Pacific, Kimberley Clark, Macmillan Bloedel LTD,
Weyerhaeuser, Brown and Root, Quanex Steel, Maverick Steel, Union Pacific, Rheem, Carrier, Riceland
Foods, Producers Rice Mill, Greenline Biofuels, Glad Manufacturing, Scott Paper, and others.
Best Project
My best project was in the Forest Products industry working for MacMillan Bloedel LTD. of Canada.
MacMillan built a laminated beam plant in Colbert, GA to manufacture a new product they had just
developed called Parallam. Parallam is a wood replacement for structural steel beams. It is noteworthy
in the fact that it is made from low quality pine trees, but has a very high tensile strength.
In the process of making Parallam, four veneer clippers sheer sheets of Southern Pine into 5/8” x 8’
strands. Glue is then applied to both sides and the strand proceeds onto an oscillating, moving
conveyor. The strands then fall onto a conveyor in an interwoven pile. These stranders are located
along the run of the conveyor, each contributing to the layup of strands. A gamma gauge measures the
density of each running inch of the layup as it is being fed into a continuous moving press. Four 125KW
microwave units pump microwaves into the press to cure the glued strands.
When the layup of strands exits the press, it is a tightly compressed billet over one foot square. It is
then sanded and re sawed into commercial grade beams and headers.
The entire process is controlled by 14 networked PLC5 and PLC3 processors and 5 Advisor PC
Operator interface computers all synchronized over 3 DH\DH+ networks using bridges to speed up data
throughput. I wrote the programs for all of the PLC and Advisor equipment and setup the networks. I
also provided program documentation and AutoCAD I/O and overall architecture drawings. The job took
me 3 years to complete and was a tremendous success.
Other Skills and Aptitudes
I have a good Mechanical Aptitude and have done Mechanical Maintenance. I know Fluid
Dynamics, both hydraulic and pneumatic, and how to install, calibrate, and troubleshoot associated
equipment. I have worked with Thermo Dynamics, and equipment used to control burner systems
most of my career. I have done Carpentry, Plumbing, and HVAC. I have worked as a PC
Repairman, Network Installer, and have Instructed Microsoft Software classes. I can learn just
about anything in a short amount of time.
Best Choice for the Position
I feel I am a talented and hard working individual, with lots of experience and know how in the types of
automation that would benefit your company. I am good at teaching others what they need to know
about operating their equipment. I know that given the chance, I can make a positive difference in your
company’s profitability and will conduct myself in a professional and ethical manner. Hopefully, all will
go well for both of us and this will be the last job I will ever have.
Job Experience
Systems Integrator
I have worked as a PLC Systems Integrator for over 30 years. My first system was an Allen Bradley
1774PLC which controlled Riceland Foods Hull Burner in Stuttgart, AR in 1975. In my years as a
Systems Integrator, I was responsible for the design and installation of PLC based control systems. My
responsibilities included analyzing the customer’s needs and selecting the components necessary to
provide the best and most cost effective solution. I would provide the control panels and install and
calibrate the devices. Then, write a program to control the process, produce the documentation and
drawings, and commission and maintain the system. I have programmed the following PLC Systems:
Allen Bradley PLC
• 1774
• PLC2
• PLC3
• PLC5
• SLC
• Micrologix
• ControlLogix
• FlexLogix
Allen Bradley Operator Interface
• Advisor PC
• ControlView
• PanelView
• PanelView Plus
I am experienced in Drives, Motion Control, Automatic ID, DeviceNet, ControlNet,
Data Highway, Ethernet IP, Wonderware, Modicon PLC, and other industrial automation products.
Electrician
I am a State of Arkansas Master Electrician with thirty years experience in industrial and commercial
wiring I have scheduled and supervised the work of as many as forty electricians on projects. I can
install electrical systems from engineering specifications per the National Electric Code.
I am experienced in the installation of rigid and EMT conduit, wiring fixtures, motor control centers,
electronic sensing devices, control panels, and wire/cable. I can read blueprints, wiring diagrams,
electrical schematics, interpret specifications, and work from equipment installation manuals. I have no
difficulty installing or working on unfamiliar equipment.
I am a very good troubleshooter in both power and controls. I have a good knowledge of relay logic,
motors and motor controls, and power distribution equipment.
Electrical Maintenance Supervisor
I have been employed as an Electrical Maintenance Supervisor. My duties included overseeing all aspects of the plant
electrical systems. My duties also included the purchase of equipment, supervision of plant and contractor electricians,
and upgrade of the electrical and automation systems to a level where the plant could start and stop with ease. I have
experience in PM and Work Order systems.
Electronics Field Service Technician
I have experience as an oilfield Subsea Controls Specialist on Blowout Preventers, worked at NASA
on the first shuttle as a Computer Operator and Instrumentation Technician, and as a USAF
Communications Repairman. I can troubleshoot problems with PCB’s to the component level I have
breadboard experience and in wiring electronic PCB racks to control panels. I can repair CMOS circuit
boards and understand the gate logic involved in each IC. I h, install and repair the system wiring,
transmitters, transducers, and valves on the surface and subsea.
I can troubleshoot electronic equipment using diagrams and schematics to the component level, have
experience with PC card testers, replace components, complete integrity and function tests, perform the
necessary calibration, and verify results by operational checkout. My duties have also included
interfacing with engineering where I would assist engineers by identifying problems and suggesting
solutions. I maintained detailed files on service calls and modifications of all equipment. These files
included detailed modification summaries, producing drawings and modifying specifications, and data
gathered during test procedures.
Personal Computer Technician
I have an excellent understanding of personal computer hardware and software. I can repair just about
any problem on any PC, install and setup operating systems, and have a working knowledge of
computer software that allows me to learn most any application program in short order. I know how to
install and setup networks, both hardware and software, and own and operate a computer sales and
service commercial store.
I have experience with all Windows Operating Systems, Microsoft Office, and many other programs
popular to PC users. I would judge my knowledge level of these software products to be very high.
Mechanical Trade Skills
I possess good mechanical aptitude and shop skills. I am not a mechanic by trade, but I have and do
know how to change motors, bearings, belts, replace seals, and have worked as a maintenance
mechanic and with small mechanical systems and parts, such as packaging, sorting, and conveying
equipment. I can perform carpentry and plumbing at a craftsman level and have built my own
commercial store, maintenance shop, computer repair facility, and am presently remodeling my own
house.
Employment and Salary History
Industrial Automation Services LLC
905 North Buerkle Street Stuttgart, AR. 721**-***-*** 0151
PLC Systems Integrator
Job Title: Project Engineer
Dates of employment: Nov. 30,1988 Jan 1, 2001 No work in area
Jun. 15, 2007 Present No work in area close company
Self Employed
Job Duties: The design, installation and service of PLC based controls for conveyor systems. This
included producing drawings, specifying and purchasing equipment, supervision of subcontractors, and
the commissioning of the system.
Automated Industrial Systems
100 Commerce Park Drive Cabot, AR
Conveyor Systems Integration
100 Commerce Park Drive
Cabot, AR. 72023
Job Title: Conveyor Systems Integrator
Dates of employment: Jan 1, 2001 – June 15, 2007
Starting salary: $47,000 year
Supervisor: Mike Roberts, Owner
Job Duties: The design, installation and service of PLC based controls for conveyor systems. This
included producing drawings, specifying and purchasing equipment, supervision of subcontractors, and
the commissioning of the system.
Reason for leaving: Company went out of business.
Industrial Automation Services LLC Nov. 30,1988 Jan 1, 2001
(See above)
Producers Rice Mill
Agricultural Product Processing
518 E. Harrison St.
Stuttgart, AR. 72160
Job Title: Electrical Supervisor
Dates of Employment: Aug. 1983 Nov. 30,1988
Starting salary: $42,000/year + company truck
Supervisor: Charles Chastain, Plant Manager
Job duties: Supervision of plant electrical systems and all electricians. I was also, the automation tech.
and PLC programmer. I suggested electrical improvements and decided on many of those myself.
Reason for leaving: I had the opportunity to team with an Allen Bradley engineer in Little Rock as a
Factory Authorized Allen Bradley Systems Integrator.
NL Industries/N.L. Shaffer Inc.
12950 West Little York Houston, TX.
Offshore Oilfield Drilling Equipment
Job Title: Senior Field Service Representative
Dates of Employment: Sep. 1979 – Aug. 1983
Salary: $30,000/yr + bonus + truck
Supervisor: Larry Richardson, Group Supervisor
Job Duties: The service and repair of subsea blowout prevention equipment. I was an
electronics/hydraulics technician.
Reason for leaving: Decided to move back home.
M.C. Electric Company
1407 South Leslie St. Stuttgart, AR. 721**-***-*** 7824
Industrial and Commercial Electrical Contractor
Job Title: Electrical Foreman
Dates of employment: Mar. 15, 1976 – Sep. 1, 1979
Salary: $7.50
Supervisor: Carroll Evans, Owner
Job Duties: Installation of electrical power and control systems, service calls, job foreman, PLC
programming.
Reason for leaving: Got a chance to work offshore and make more money.
United States Air Force
Lackland AFB and Offutt AFB
Job Title: Electronic Communications Repairman Cryptographic Systems 3ABR30650
Dates of Enlistment: Active Duty: Jun. 18, 1973 – Aug. 30, 1974
Active Reserve: Aug. 30, 1974 – Mar. 24, 1980
Supervisor: Pete Morrison, 1st Sgt., 39th Brigade, 39th Spt. Battalion, Company C
Discharge: Honorable
Education, Training, Licenses and Contact Information
Primary Contact
Anthony Alan Jones
905 North Buerkle Street
Stuttgart, Arkansas 72160
870-***-**** cell phone
501-***-**** fax
eMail: ***********@***.***
Education
Graduated Stuttgart High School
•
Training
USAF Electronic Communications and Cryptographic Systems
•
Allen Bradley Programmable Logic Controllers
•
Reliance AC and DC Drive Systems
•
Photo switch Electronic Sensing Products
•
Allen Bradley Barcode Systems
•
Licenses and Certifications
FFA Certified Private Pilot
•
FCC Certified Radio Telephone Operator
•
State of Arkansas Master Electrician #M 4454
•
State of Arkansas Boiler Operator #19996
•
State of Arkansas Electrical Contractor #021*******
•
Arkansas Workforce Career Readiness Gold Level in Applied Technologies
•
Electrical, Mechanical, Fluid Dynamics, Thermal Dynamics
•
NCCER Certified Electrical Instructor
•
Microsoft Certified PC Systems Builder
•
Microsoft Certified PC Software Reseller
•
Microsoft Certified PC Systems Refurbisher
•
Memberships
Instrument Society of America
•
Contact this candidate