Engineer Project

SRIKANTH NAGARAJ

E-mail: ********@*****.***, *****@*******.***

KEY SKILLS

Over 9+ years of experience in Engineering Design and consultancy related

to Oil and Gas, Refinery, Process, and Petrochemical industry. Well versed

in Equipment/Piping layout, Checking & Review of all Piping & Equipment

related drawings, Material Take Off, Piping Isometrics, etc. Converse with

relevant Standards & Codes, with Strong Analytical & Excellent

communication skill.

SOFTWARE SKILLS

Plant Design System (PDS)

Plant Design & Management System (PDMS)

Smart Plant Review & Navis Review

Caesar-II: Fair Working Knowledge on stress analysis.

CAD: AutoCAD 14/2000.

Operating Systems: MS Office Suite.

EDUCATION PROFILE

. Bachelor of Engineering in Mechanical with specialization in

Industrial Engg & Mgmt), 1996-2000 (full time Engineering from M.S

Ramaiah Institute of Technology)

The Bangalore University, Bangalore, India.

. Diploma In Mechanical Engineering, 1994

Karnataka State Technical Board, Bangalore, India.

Areas of Expertise

Piping / Layout

1. Study and Review of Plot Plan / Equipment Layout /

Process Description / PFD / P&ID / Line list /

Piping Material Specifications / MDS / Vendor

Drawings.

2. Preparation of Equipment layout which involves

locating the various Vessels, columns, exchanger,

storage tanks, pumps, air coolers based on the code,

statutory and client requirement.

3. Preparation of Conceptual Piping layout, which is

used to estimate preliminary bill of quantities.

4. Preparation of Nozzle orientation drawings with

platform, support clip details and location of

instrument hook details.

5. Preparation of Piping Layout with minimum possible

routing by considering flexibility, access,

maintenance and safety accepts. Also satisfying code

/ client requirement.

6. Pipe wall thickness calculation.

7. Extract and checking of Piping Isometrics, Piping

General Arrangement, Pipe Support Arrangement

drawings.

Piping Supports

8. Loads on Pipe Rack / Platform /vessel clips/ various

support location are reviewed and transferred to

Structural dept. to design their structure and

foundation.

9. Support location and types of non-critical lines are

marked on the layout using support standards

10. Preparation of Special Support Sketches and Support

Standards.

11. Review of Stress analysis reports of Metallic and

non metallic piping to check feasibility in layout

design.

Procurement & MTO

12. Preparation & Checking of Piping bulk & Valve MTO

13. Preparing datasheet for valves and piping

specialties.

14. Preparation and checking of RFQ, TQ, TBA and

purchase Requisitions.

15. Raise & Review TQ's

PROFESSIONAL EXPERIENCE

Present Employer:

L&T Valdel Engineering Ltd, Bangalore.

Designation:- Asst Technologist - Piping (Oct. 2008 to Till Date)

Projects Involved

Name of the Project: - MHN Process Complex & Living Quarters Project.

Client :- Oil & Natural Gas Corporation, India

Functioning as a Module Lead Engineer is responsible for following

activities.

a. Development of Equipment layout from Concept stage.

b. Piping study and develop economical & flexible pipe routings.

c. Vendor Documents & Drawings review.

d. Participation in Vendor review meetings.

e. Issue of weight control report to Structural and Installation team.

f. Man power allocation & control of man hours in the project.

g. Preparation of Weekly & Monthly project progress reports.

h. Participation of 30%, 60% & 90% model review with client.

i. Responsible for issue of AFC Isometrics and Piping GAD's

Name of the Project: - Tullow Ghana Limited, Jubliee FPSO.

Client :- Alliance Engineering, Houston, USA.

Was Responsible for Design review of 3D model during 60% & 90% review.

Suggested improvements and optimised line routings. These design changes

were helpful from installation & fabrication point of view.

Name of the Project: - Modec MV-20 FPSO.

Client :- PetroBras, Brasil.

Led a Team of 6 Engineers for Quality checking of Isometrics & Piping

General Arrangement Drawing, and was responsible for IFC document release

for the same, was responsible in resolving Piping clashes for individual

models.

Proposal Engineering

Name of the Project: - US Oil Pipe Line Replacement Project.

Client :- ADMA OPCO - Abu Dhabi

Project consisted of piping man hour estimation for FEED proposal of 8 Well

head towers modification and 2 new manifold and riser platform.

Name of the Project: -Foroozan field develpoment Project.

Client :- IOEC - Iran

Project consisted of piping man hour estimation for detailed engineering of

Process complex, Living quarters and a Bridge

Previous Employer:

Snamprogetti Eni Group, Italy (On Deputation through ITC Technology Srl,

Italy)

Designation:- Engineer - Piping (Jan. 2008 to Sep. 2008)

Projects Involved

Name of the Project: - Bander Abbas Gas Condensate Refinery, Iran.

Involved in :- Preparation of Piping Study for Tank Farm Area, Equipment

and Piping Modelling activities for Unit areas Naphtha Hydrotreater unit &

Catalytic Regeneration Unit, Preparation of Nozzle Orientation Drawings

considering Process and Mechanical requirements. Extraction of Isometrics

for Stress analysis and incorporation of stress analysis comments,

modelling reviews using SPR.

Tecnimont S.P.A, Italy (On Deputation through ITC Technology Srl, Italy)

Designation:- Engineer - Piping (April. 2007 to Dec 2007)

Projects Involved

Name of the Project: - Salavat HDPE Plant, Russia.

Involved in :- Preparation of Piping Layouts for Polymerisation and Reactor

Area, Piping Study & 3D modelling in PDS, Running of Interface Clash report

and Resolving clashes. Review of Structural Layouts, Review of Nozzle

reports, Review of Vendor Drawings, Review of Stress support Marking for

critical lines, Review of Isometric Drawings and Issuing of Isometrics for

AFC. Modelling review using SPR.

Previous Employer:

Foster Wheeler India Pvt Ltd., Chennai (A 100% subsidiary of Foster Wheeler

Energy Limited, United Kingdom)

Designation:- Engineer - Piping (Oct. 2005 to April 2007)

Projects Involved

Name of the Project: - PetroRabigh UOU.

Client :- JV between Saudi Aramco and Sumitomo, at Rabigh, Saudi Arabia.

Involved in :- Preparation of Piping Layouts for Central Area Pipe Rack &

Fresh Caustic area, Interface check, 3D modelling in PDS, Extraction of

Isometrics Using Isometric Drawing Manager, Review of Structural Layouts,

Review of Stress support Marking for critical lines, Review of Isometric

Drawings and Modelling reviews using SPR.

Previous Employer:

Rotary Mec Engineering (India) Pvt. Ltd., Bangalore. (A 100% subsidiary of

Rotary Engineering Ltd., Singapore, a leading EPC company)

Designation: - Engineer - Piping (Jan. 2005 to Sept. 2005)

Projects Involved

Name of the Project: - Hin Leong Storage and Terminal Facilities, Jurong

Island, Singapore (EPC-Project).

Petroleum storage terminal capacities of 2,182,000 m3.

I was actively involved in Detailed Engineering of Piping systems,

which includes the following activities:

a) Preparation of Plot plan and Equipment layout as per Process flow

diagram and process data sheets.

b) Preparation of piping layout as per P & I Diagram, equipment layout

and process data sheets.

c) Developing the setting plan and supporting elevation of each equipment

based on piping layout.

d) Preparation of Preliminary Piping Bill of Material and other Piping

related activities.

e) Extract and checking of Piping Isometrics, area wise and line wise.

Name of the Project: - Vopak Caojing Terminal Project, Shangai China.

Petroleum storage terminal capacities of 29,000 m3.

a) Preparation of Piping Layout for Tank Farm, Pump Station and Manifold

Area, as per Process flow diagram and process data sheets.

b) Extract and checking of Piping Isometrics, area wise and line wise.

c) Preparation of Piping Bill of Material and other Piping related

activities.

d) Preparation of Support Drawings and Support Marking.

e) Vendor Evaluation for Valves.

Name of the Project: - Zhuhai LPG Phase II Expansion.

Client: - British Petroleum, China.

a) Checking of Piping Isometrics.

b) Material Take Off from P & ID's, Layout and Isometrics.

c) Vendor Evaluation for Valves.

Previous Employer:

Chemtex Consulting of India (P) Ltd., Bangalore. (A subsidiary of

Mitsubishi co., USA), On deputation through BhasinSoft India Pvt Ltd,

Bangalore.

Designation: - Engineer - Piping (Jan. 2002 to Dec. 2004)

Name of the Project: - TATA HONEYWELL, Baroda.

Client: - IOCL, Hazira, Gujarat, India.

Involved in: - Preparation of Equipment Layout, Piping General Arrangement

Drawings, Checking of Nozzle Orientation drawings, Preparation of Plano

metric sketches, Isometric, Support drawings & MTO generation till Issued

for Construction.

Name of the Project: - Reliance Industries Ltd., Jamnagar, India.

Involved in: - Preparation of Equipment Layout, Preparation and Updating of

Piping General Arrangement Drawings in Main Pipe Rack and Tank Farm Area,

Nozzle Orientation Drawings, Isometric Extraction & MTO generation.

Deputed to Reliance Petroleum Ltd. Jamnagar,

Worked Under Project and Material Management Group (RPL)

(Deputation Through Chemtex Engineering India Ltd, Bombay) From Nov 2003 to

June 2004.

Nature of work done during my assignment at RPL Ltd.

Updating of Piping GAD's and Isometrics for As Built, Co-ordination with

Site Office.

Other Projects

+ Alexandria Carbon Black, Egypt. (Grade N-330 CB, 4th Line Expansion).

+ CO2 PLANT, PRAXAIR INDIA LTD., BANGALORE

+ HHR FIBRE PLANT, BALLARPUR INDUSTRIES LTD., YAMUNAGAR.

Previous Employer:

Tata BP Solar India Ltd., Bangalore.

Designation : - Draftsman (Jan 1996 to Dec 1996)

Joined as a Draftsman, was involved in preparation of Drawings and

documents related to solar equipments like Solar Water Heaters, Solar

Photovoltaic modules, Solar lighting systems and Solar Grid.

Previous Employer:

Asea Brown Boveri Ltd., Bangalore.

Designation : - Diploma Trainee Engineer (Mar 1995 to Dec 1995)

Joined as a Diploma Trainee, was involved in preparation of Equipment list,

Line list, Instrument list. Piping & Instrument Diagram, Process Flow

Diagram, Utility Distribution Diagram, Project Data Manuals etc.,

Executive In-plant Training

. Undergone 72 Hours of Plant Design System (PDS) training in Equipment

Modelling, Piping Designer, Drawing Manager and Isometric Drawing

Manager.

. Attended ISO 9001 awareness program conducted by Institute Of Standard

Engineers, Bangalore.

. Undergone a one-day workshop on implementation of ISO 9001-2000.

PERSONAL DETAILS

Date of Birth : 30th April 1975

Marital Status : Married

Nationality : Indian

Passport No. : F-3902228

Valid up to 04-07-2015.

Address for

Communication : 700, AGNEW RD., APT 347

SANTA CLARA, CA 95054-4222

USA

Phone: +1-408-***-****

Contact this candidate