Manufacturing Engineering
Resume:
TRENTON CEDRIC HUDSON
***** ********* ** ******, ***** Gardens, FL 33056
*.******.**@*******.***
OBJECTIVE
Obtain an entry level mechanical/manufacturing/CNC engineering position in
Florida who is open for relocation.
SUMMARY
I currently have 4 years of job shop/contract manufacturing experience from
various contract manufacturing companies. Over the years I have
manufactured various medical, commercial, government and aerospace parts
such as U.A.V. turbine engine components and aerospace tooling equipment
for CFM turbofan engines. I have manufactured various aviation fuel pumps
nozzle for various small craft airplanes. I also recently worked on PMA-FAA
parts for sub contractors to manufacture aviation transmission gears, pumps
and G- rotors. I manufactured various medical devices such as bone screws,
fibula, tibula and other complex medical assembly devices. Majority of
these parts require critical tolerances and strict inspection requirement
that were difficult to meet. Over the years I have came in contact with
various exotic materials and numerous manufacturing processes to broaden my
expertise in this field.
EDUCATION
Tennessee State University, Nashville, TN
B.S. of Mechanical Engineering December 2006
Ajou University, Suwon, South Korea (Study Abroad) Summer Semester 2007
Business Management Courses with Korean Culture exposure
Nashville Auto Diesel College, Nashville, TN
A.S. of Applied Science an Automotive Repair, September 2001
EXPERIENCE
( 11+ years of on the job manufacturing experience in a variety of
manufacturing process environments.
( 3+ years of Computer Aided Design program or Drafting experience.
( 3+ years of on the job experience with CNC machines, various tooling,
fixtures and creating CNC G code programming
( 1 years of CNC and manufacturing course work at the college level.
( 1+ years of injection molding experience with various plastics and
composite material.
( 2 + years of on the job robotics operation experience.
( 4+ engineering design experience
( 2+ years on the job engineering design experience.
( 5+ years of logistics environments such as Shipping & Receiving, Supply
Chain, and Logistic processing.
( 1+ of logistic supervisor experience.
( Self employed as an independent C.A.D. Drafter and CNC machinist for
contract manufactures in South Florida.
( Manufactured my own line of automotive products using CNC machines.
SKILLS/KNOWLEDGE
( Knowledge of Lean manufacturing, Six Sigma methods, continuous
improvement initiatives, and various international quality management
standards such as F.A.A., ISO, MIL-STD, and FDA.
( Utilization of SPC techniques, 5S implementation, ISO 9000 & Tier 1
manufacturing plants and GMPP standards.
( Blueprint reading skills in machining, welding, hydraulics and
manufacturing assembly.
( Geometric Dimension and Tolerance knowledge in ISO and ANSI standard
formats.
( Skilled in the creation Bill of Materials and 2D Blueprints along with
quoting parts for manufacturing.
( Knowledge of basic hand tools, large automotive equipment, along with
basic engineering and measurement tools.
( Experience with various CNC Lathe and Mills, Wire EDM, Swiss Machines,
Punch & Press, Injection Molding machines, Laser machines, sheet metal
equipment and other manufacturing process equipment.
( Experienced with various excotic materials such as inconel, titanium,
Copper Beryllium, and PEEK plastic. Skilled in the manufactuing of very
tight toleranced parts in medical and aerospace industries.
( Knowledge of machine preventative maintenance routine. Use of equipment
manuals or schematics and the repair of various process equipment.
( Engineering Design experience with basic reverse engineering techniques.
Knowledge of Engineering analysis software.
( Programming Experience with Solid Works C.A.D, FeatureCAM, Esprit C.A.M,
Quicken Books, Profit key ERP/ MRP system, CNC G Code, CNC Macro Code and
various Microsoft office windows programs ( Word, Excel, Project).
( Learned, applied, and utilizing various computer programs such as C+,
Excel spreadsheets and Visual Basic.NET, a in college for college level
projects such as research, class assignments and design analysis.
( College Courses taken include: Senior Design Project, Manufacturing
Principles, Thermal Systems, Advanced CAD Design, Advanced Mechanics, and
HVAC Design.
WORK HISTORY
Marktwo Engineering., Manufacturing Engineer/ Engineering Cost Estimator:
June 2010 to July 2011
( Plans and designs manufacturing processes in facility for contract
manufacturing jobs in medical, aerospace, and
commercial industries.
( Maximizes efficiency by analyzing layout of manufacturing equipment,
workflow, assembly methods, and work force
utilization using lean techniques.
( Prove out manufacturing methods for jobs and prepare quality documents
to meet the various standards.
( Train and supervise all operators on production methods and quality
standards for all manufactured parts.
( Assist in generating new sales and quote all incoming contract jobs for
manufacturing.
( Implament Design for Manufuring (DFM) and Design for Assmebly (DFA) with
customers to meet there cost goals.
( Work with other vendors or manufacting companies for outsourced
manufactuing processes that may be needed.
( Order all tooling, manufacturing equipment and supplies that are needed
for a given job.
( Develop and prove out quality plan to me all required manufactuing
standards an cost goals.
United Electronic Corporation, (Temporary Employee) CNC Lathe Swiss Machine
Operator: January 2010 to April 2010
( Operate Hanwha swiss lathes, Mazak Multiplex lathes and Mills on a
daily basis.
( Check an inspect parts to meet quality standards. Adjust offsets,
replace tooling and perform machine maintenance.
( Perform daily documentation of inspected parts following ISO and MIL
standards.
( Machined various power connectors male and female from various
materials.
Henderson Machine Inc., (Independent Contractor) Engineer/CNC/Office
Administrator: May 2009 to January 2010
( Perform engineering services such as reverse engineering and some
redesign for manufacturing.
( Help reorganize manufacturing shop for Lean an FAA certification an
provide shop floor control.
( Design Drawings or Prototypes for clients as directed using Alibre C.A.D
program.
( Program and set up CNC and manual machines along with various equipment
for manufacturing of parts.
( Assist in front office duties such as selecting suppliers for various
materials and quoting incoming customer jobs. Handle all customer issues
and assist in customer satisfaction on final product.
( Travel to organization trade shows and other various clients for
potential customers to solicit new business.
Ligi Tool & Engineering., CNC Programmer/Operator & C.A.D Designer: October
2008 to May 2009
( Prepare various CNC machines for machining by using C.A.D and C.A.M
programming and Machine Set-up
( Read and interpret Blueprints for specific jobs and check for proper
dimensions by various measurement tools.
( The use of various shop equipment such as saws, hand tools, grinders,
jigs, fixtures and machine presses.
( Design Drawings or Prototypes for clients as directed using Solidworks
C.A.D program.
( Machined a variety of materials and client jobs from aerospace,
military, commercial, plastics, and alloy materials.
INTERNSHIPS
Hospital Corporation of America (HCA) Internship: Spring 2006
( Taught by engineers on how to operate and design various heating and
ventilation equipment.
( Perform theory, design and analysis studies using computer engineering
analysis software.
( Introduce to the latest and most advanced HVAC equipment along with the
intended specialize use.
( Certificate of Completion of HVAC equipment from HCA.
Design of an Ultra Wide Band Antenna Research Summer 2006 Sponsor: DARPA
Defense Department
( Design an enclosure for the ultra wide band antenna. Prepare and present
technical engineering reports.
( Research possible antennas and determine which will be best for
application.
( Selecting various materials to protect the antenna from the subjected
environments for a unmanned aerial vehicle.
Nissan Automotive Manufacturing Plant Internship: Summer 2003
( Worked with employees and Upper Management with a hands on approach to
large scale manufacturing.
( Learned about how Continuous Improvement Programs work such as Lean
manufacturing, Six Sigma and Total Quality Management.
( Worked on various assembly lines to understand how and what is needed to
assemble the various parts of a automobile.
( Introduced to the latest manufacturing process techniques at the time
used by Nissan to manufacture cars and parts.
Professional Engineering Societies
( American Society of Mechanical Engineers (A.S.M.E.)
( Society of Manufacturing Engineers (S.M.E.) Chapter 150 (Southeast
Florida Chapter)
Technical groups: Machining And Metal Removal Tech Group
Additive Manufacturing Tech Group
Contact this candidate