Mitchell Ames
Middletown, NY ****0
Home 845-***-****, Cell 845-***-****
abgsr6@r.postjobfree.com
Personal Objects: To use my twenty five years of industrial maintenance
experience and my education to make the impossible seem like everyday
business. To produce the highest quality of work that can be possibly done.
To do work that I can have pride in everyday. To be challenged enough that
I will grow from it.
EDUCATION:
O.C.C.C. Middletown, NY
Associates Degree in Electrical Tech
Axcelis Tech
ES3i Tool training, Silver Springs, MD
Implant Tool training Boston, Ma
Tokyo Electronic
Clean Track Lithius/Act12 Austin, Tx
Bergen Tech. Hackensack, NJ
Received two certificates in Advanced PLC (Allen Bradley, RS logic)
WORKING EXPERIENCE:
Transdyn Controls, East Rurthford, NJ 2/11-Present
Elec Maintenance/InstrumentationTech
Install, troubleshoot, repaired all equipment. Check, installed, verified
all instrumentations. Installed and updated software for the DEP of NY City
and there HMI's & Scada system. Work with Device net & ModBus, and either
net. Work and assign IP address and data noids. Work on control panels with
I/O blocks with PC Boards, AC/DC Drives (VFD) systems, and 24v (A/C & D/C)
power supplies. Program, check, and install P.L.C.'s programs with PID's
loop, with 4/20's signals. Check and install all types of instruments for
precise measurements & controls. Installed and repaired AC/DC electrical
motors, digital encoder. Install, set-up, program A/C, D/C, and vector
drives (VFD's). Troubleshooting, tearing down, and installing heavy and
light industrial equipment. Certified that the equipment/tool is performing
as design, and as per the customer. Work with all DEP engineers and other
NY City Dept. heads.
Veeco Tech. Kingston, NY 2/10-12/11
MOCVD FSE III, Elec & Mech Maintenance/InstrumentationTech:
Install, troubleshoot, repaired all equipment. Check, installed, verified
all instrumentations. Installed and updated software. Work with high vacuum
systems up to the -9Torr. Install & program production robots. Work with
Device net, this information will network and control the speed and quality
of product. Work on control panels with I/O blocks with PC Boards, AC/DC
Drives (VFD) systems, and 24v (A/C & D/C) power supplies. Program, check,
and install P.L.C.'s programs with PID's loop, with 4/20's signals. Check
and install all types of instruments for precise measurements & controls.
Installed and repaired AC/DC electrical motors, digital encoder. Install,
set-up, program A/C, D/C, and vector drives (VFD's). Troubleshooting,
tearing down, and installing heavy and light industrial equipment.
Certified that the equipment/tool is performing as design, and as per the
customer.
Marcal Paper, East Elmwood, NJ 3/08-11/10
Elec & Mech Maintenance/InstrumentationTech:
Install, troubleshoot, repaired all equipment. Check, installed, verified
all instrumentations. Installed and updated software. Install & program
production robots. Work with data link noids, this information will network
and control the speed and quality of product. Work on control panels with
I/O blocks, AC/DC Drives (VFD) systems, and 24v (A/C & D/C) power supplies.
Program, check, and install P.L.C.'s programs with PID's loop, with 4/20's
signals. Check and install all types of instruments for precise
measurements & controls. Installed and repaired AC/DC electrical motors,
digital encoder. Install, set-up, program A/C, D/C, and vector drives
(VFD's). Troubleshooting, tearing down, and installing heavy and light
industrial equipment.
Tokyo Electronic, East Fishkill, NY 07/06-12/07
Elec & Mech Maintenance/InstrumentationTech:
Install, troubleshoot, repaired all TEL equipment. Check, installed,
verified all instrumentations. Installed and updated software. Work with
high vacuum systems. Install & program production robots. Work with data
link noids, this information will network and control the speed and quality
of product. Work on control panels with I/O blocks, AC/DC Drives (VFD)
systems, and 24v (A/C & D/C) power supplies. Program, check, and install
P.L.C.'s programs with PID's loop, with 4/20's signals. Check and install
all types of instruments for precise measurements & controls. Installed and
repaired AC/DC electrical motors, digital encoder. Install, set-up, program
A/C, D/C, and vector drives (VFD's). Troubleshooting, tearing down, and
installing heavy and light industrial equipment
Axcelis Technology, East Fishkill, NY 09/03-05/06
Elec & Mech Maintenance/InstrumentationTech:
Install, troubleshoot, repaired all TEL equipment. Check, installed,
verified all instrumentations. Installed and updated software. Work with
high vacuum systems. Install & program production robots. Work with data
link noids, this information will network and control the speed and quality
of product. Work on control panels with I/O blocks, AC/DC Drives (VFD)
systems, and 24v (A/C & D/C) power supplies. Program, check, and install
P.L.C.'s programs with PID's loop, with 4/20's signals. Check and install
all types of instruments for precise measurements & controls. Installed and
repaired AC/DC electrical motors, digital encoder. Install, set-up, program
A/C, D/C, and vector drives (VFD's). Troubleshooting, tearing down, and
installing heavy and light industrial equipment Work with high vacuum
system as high -7Mtorr.
Weyerhaeuser Container, Closter, NJ 8/01-9/03
Sr.Electrical & Mechanical Builder/Tech
Rebuild, update, or engineer old electrical and mechanical equipment for
high-speed production. These are key components that interface with the
entire production system. The information it receives will network and
control the speed and quality of product. Build the control panels with I/O
blocks, AC/DC Drives (VFD) systems, and power supplies. Program, check, and
install P.L.C.'s programs with PID's loop, with 4/20's signals. Check and
install all types of instruments for precise measurements & controls. Read
and write electrical/ mechanical schematics with AutoCad. Installed and
repaired AC/DC electrical motors, digital encoder, DC Tact and all other
electrical components. Install, set-up, program A/C, D/C, and vector drives
(VFD's). Troubleshooting, tearing down, and installing heavy and light
industrial equipment. Use my troubleshooting skills to not only find the
problem, but to find the root of the problem (Elec/Mech) and try to fix it
permanently. Have experience in breaking-down, Pm's and
testing/certification on HVAC systems. Repair or rebuild multi-stage
gearboxes, multi-stage hydraulic pumps and hydraulic/air cylinders,
industrial paper rollers and ceramic bearings. Installed, and operator high-
pressure boilers from high-pressure steam fitting and pipefitting, and
passed all state inspections. Design and build production parts with
Milling & Lathes, and my welding skills in Tig, Stick and Mig for new and
old equipment. Meet or exceed the set tolerances. Also, use my skills to
service and install production equipment in other plants across the U.S.A.
Use AutoCAD to design improvements in safety, production, and quality.
Build all mechanical and electrical aspects for these systems. Work as an
equal with Elec/Mech Eng, and Project Mgr. on several issues, R &D,
designing, and safety of production of this equipment.
Ball Metal Container, Middletown, NY 01/98-01/01
Elec & Mech Maintenance/Tech:
Rebuild, update, or engineer old electrical and mechanical equipment for
high-speed production. Build the control panels with I/O blocks, AC/DC
Drives and power supplies. Read and write electrical/ mechanical schematics
with AutoCad. Installed and repaired AC/DC electrical motors, digital
encoder, and all other electrical components. Install, set-up, program A/C,
D/C, and vector drives (VFD's). Troubleshooting, tearing down, and
installing heavy and light industrial equipment. Have experience in
breaking-down, Pm's and testing/certification on HVAC systems. Repair or
rebuild multi-stage gearboxes, multi-stage hydraulic pumps and
hydraulic/air cylinders. Design and build production parts with Milling &
Lathes, and my welding skills in Tig, Stick and Mig for new and old
equipment. Meet or exceed the set tolerances of +/_ .00005.