Manager Plant

Mark Dinehart - *** Allison St . Lakewood, CO ****4

**********@*****.*** . 720-***-****/720-***-****

SUMMARY

Experienced maintenance supervisor, ethanol plant operations manager,

control engineer, maintenance, preventive maintenance in the power plant,

processing and chemical industry.

Journeyman Boilermaker, worked in the construction/rebuild of fossil fuel

power plants.

I have had extensive involvement with equipment vendors and suppliers.

Represented company to customers, in providing on-site support for

installation, modification, diagnosis and repair of material handling

equipment and associated peripherals.

. Typical equipment includes Belt Conveyors, Pipe Conveyors, Stacking &

Reclaiming Equipment, Ship-loaders, Barge Loaders, Ship Unloaders, and

Barge Unloaders, BWRS, Crushers, etc.

. Provided engineering interface and liaison between manufacturing and

design department on new equipment releases.

. Responsible for implementation of design changes and upgrades on new

and existing equipment, based on customer requirements.

. Prepared TSR (technical service reports) for field evaluations and

inspections, installation techniques and procedures, budgets and

proposals for any field change notices.

. Practical and theoretical knowledge of optomechanical assemblies,

laser alignment systems, mechanisms, electrical and mechanical

systems, mathematics, Pro Engineering and other physical sciences.

QUALIFICATIONS

. Preventive/predictive maintenance and service of: Gyratory Crusher

including liner removal/replacement (45, each weighing 2 tons), 11mi.

Conveyor belts (PC2), 1mi. Conveyor belts (PC1), accelerator/tracking

rollers, troughing frames, turn over rollers, bearings, reducers,

pumps, motors, couplers repair and replacement.

. Ensured proper operation of: Pipe conveyors, Rotary Feeders, Vibration

Feeders, Apron Feeders, Pulverizers, Ball Mills, Magnets, Metal

Detectors, atomizers and all power plant equipment and created work

orders.

. Ran all phases of the Trona Ore Handling processing facility

including: Proper operation of belt conveyors, screw conveyors,

elevators, feeders, and 8 ton double drum hoist, crushers (4 Penn

hammer mills-100 ton hour each), dissolvers, filters and Bi Carb kiln

operation.

. Knowledge of most forms of power equipment, including the safe

operating limits and lock out/tag out of equipment training including:

Nordberg Hoist, Boilers, Grove/30ton/95', D7, 8, 9, 9H dozers, 911

track loader, JD, Case loader, Case backhoe and Lull, Terex, Bobcat,

Rubber Tire Loaders, 10 wheeled dump trucks, Kenworth Semis, 2000,

4000, 6000 lb. Hyster forklifts and COGZ, maximo Maintenance

Management Systems.

. Directed up to 70 employees; 13 crew and maintenance, engineers,

chemists, I & C, electricians and contractors.

. Active Security Clearance

. Lock out and tag out creation and proper clearance hanging.

PROFESSIONAL PROFILE

Schmueser & Associates INC - Rifle, Colorado -Industrial Contractors.

(contract) 2012

Project Safety, Barrick Goldstrick and MSHA Instructor for CO, NV, NM, AZ,

ID, WY.

Train new employees and recertify current employees as needed, Identify,

proritize and resolve safety issues at multipule projects.

Gold Canyon Mining and Construction. Tonopah, NV (contract) 2012

Temp Crusher Maintenance Superintendent, Barrick Round Mt.

All aspects of portable crushing plant, jaw, cone, belts, screens.

ThyssenKrupp-Robins/Greenwood Village, CO and Inquique, Chile S.A.

(contract) Jan 2011-Apr 2011

Control Engineer/Service (contract)

Extensive experience related to all engineering aspects of material

handling equipment, mining, port handling and rotating machinery including

specification and selection, design, witness testing, inspection,

installation, commissioning, start-up, maintenance and technical services.

Xcel Energy/Cherokee Station/Denver, CO-Plant Supervisor 2008 -2010

717 NMW, 4 units coal fired.

Direct leadership and supervision of personnel. Daily Safety/Job Briefings

/Time entries. Administer bargaining unit agreement. Oversee and direct

contractors on site. Manage performance of work teams through clear

communication of expectations, engaging team in work completion and process

improvement, giving recognition, and use of positive discipline. Provide

leadership that encourages use of new plant information technology as well

as an integrated learning approach to work.

Routinly worked with Acids/Phos - PH control and hydrogen -generator

cooling.

I was assigned the task of the positive operation (repair) of plant soot

blowers (120 retratable, wall), they were at 37% availability when I was

hired. In less than one year, I brought them up to 87% availability.

Work with site scheduling in planning of outage work and day-to-day

activities Ensure execution of daily work schedule. Supervise work

identification and completion via the Compass tool set.

Participate in or lead business unit improvement initiatives.

Freeport McMoran/Henderson Operations, Empire, CO 2005-2008

Lead PM Mechanic-Crush &Convey.

Preventive/predictive/ maintenance of gyratory crusher, 11 mile long

conveyor belt (PC2), 1 mile conveyor (PC1), accelarator/tracking, rollers,

troughing frames, turn over rollers, bearings, reducers, couplers .

Operation of forklifts, overhead cranes, locomotives, manlifts, welders,

cutters, dust collectors/abatement, vibration/temp readings, shift reports,

daily pm's and problem resolution.

Mentoring new employees in safety, problem identification/phyics and

resolution.

Midwest Renewable Energy, Sutherland, NE 2004-2005

Operations Manager/Plant Safety Director/ Environmental Manager/Plant

Security.

Duties: Safety Program and environmental reporting administrator.

Responsible for plant operations monitoring and quality control. Answers

directly to the plant manager. Serves as intermediary between lead

operators and plant manager. I wrote operations procedures and policy

improvement, site specific SOPs, PSMs - (chemicals) / creation / change and

implementation. Responsible for implementing standard instrumentation

calibration, safety training and assessment. Works hand in hand with plant

manager to ensure optimal production

Additional duties include safety and environmental program administrator.

This is a staff position and advisor to the general manager on all matters

concerning the implementation of the safety and environmental programs.

Implemented and develops the safety program working hand in hand with the

plant manager. Duties also included implementing all aspects, to include

supervision of sampling procedures by operators and timely submission of

samples and plant inspections by OSHA, EPA and Nebraska DEQ.

West Boise Sewer District, Boise, ID 2001--2004

Environmental Compliance Specialist - Relief Maintenance Supervisor

(vacations, personnel, sick). Duties included administrative, commercial/

industrial inspections, pre-cons, contract administration, enforcement,

plan review, SIU discharge permits, blueprints/ asbuilts, sampling, problem

resolution, routine interaction with EPA, DEQ, engineering, Board of

Directors and all the reports associated with the aforementioned. Some

computer programs used are Windows, Word, Excel, Outlook, Flowlink,

Flowlink3, Flowlink4, Orion, Maximo, Eclipse, Cogz, Compass and EPA.

Routinely worked with Acids/Phos -PH control. Routine Quality samples.

Accomplishments: During my tenure, my district was the only district in the

State of Idaho completely in compliance with District, EPA and Idaho DEQ

regulations.

Wyoming - Trona Mine, Production/Processing Operator

Qualified and ran (at different times) all phases of the trona ore

handling, crushers, dislovers, waste water, filters, rotary kiln,

milling/processing plants including floatation, crystallization and Bi-

Carb operation.

Routinly worked with and created Acids/Phos/cynide/ bi-carb and TA for

chemical creation.

Safety / Training

Former Plant Safety Director required to train/certify forty people (per

OSHA) for various positions

Trained and supervised numorous operators and managers on various jobs

withou any of them ever having any incident/acccident on that job.

Daily and weekly Safety/job briefings/safety audits

Member - United States Mine Rescue Association

U.S. Department of Labor - I am certified MSHA Instructor/IS /IU -

(unlimited) Surface and Underground - 8/2006. U.S. Department of Labor -

Certified MSHA Project Safety

Midwest Renewable Energy - Reduced lost time injuries from 12 (the year

previous to my tenure) to Zero the entire time that I was there.

I have 25 years mill, mine, operations, maintenance and management

experience in mining. Preventing accidents using

experience/communication/training and teamwork.

Accomplishments:

Exceeded corporate expectations of out put from plant on a regular basis.

Advised chemical engineer's on the most efficient production methods.

Wastewater l Pumphouse l Tailings/Filters

Operated, monitored and maintained all aspects of wastewater treatment

facility of 9mgd including quality samples during shifts; Change H2s

railroad cars and h2s "on" and "off' line as necessary; slurry systems

operation, leak detection; collects h2s, Nash samples, changes/ajusts

pumps; Certified in air pack (SCBA), and lifeline control room rescue

systems.

Maintenance / Boilermaker/Pipefitter/Equipment Operation

Experience prioritzing, work orders, multi projects, maintaining inspection

logs, maintenance history of plant equipment, coordinating with other

departments and team leadership in the mining/chemical plant processes,

construction/rebuild of fossil fuel power plants, maintenance, including

mechanical, electrical repair and replacement, production/operations and

operational problem resolutions. Knowledge of most forms of power

equipment, including the safe operating limits, lock out/tag out of

equipment training including: Nordberg Hoist, Boilers, Grove/30 ton/95',

D7, 8, 9, 9H dozers, 911 track loader, JD, Case loader, Case backhoe and

Lull, Terex, bobcat, rubber tire loaders, 10 wheeled dump trucks, Kenworth

Semis, 2000, 4000, 6000 lb. Hyster forklifts and MIMS, Eclipse, Maximo and

COGZ Maintenance Management Systems

Management / Planning / Organization

Established communication, authority and responsibility. Inspects,

monitors, directed, instructs, explains, counsels, supervises, 183 MIU/SIU

businesses, corporations and companies including 6 hospitals and 6 schools.

Pre cons meetings with utilities and contractors concerning issues

pertaining to environmental /discharge permits / new construction /

expansion / connection and problem resolution per CFR, EPA, DEQ, UPC and

DISTRICT policy that call for considerable discretion, judgment and

negotiation authority.

Identified, prioritizes, researches, reviews, designs, schedules, and

assigns the implementation of project solutions, cost effective

presentations to groups and vendors, plus interaction and follow up with

department heads.

EDUCATION/TRAINING/TESTING

California State University, Sacramento, CA.- Engineering and Computer

Science/water

Utility Management

Certified -2002

Pretreatment Facility Inspector

Certified -2001

Operation and Maintenance of Wastewater Collection Systems

Certified -2001

FMC - Plant Safety, Science, Pumps-1-3, Process Sampling, Slurry systems,

Equip. Drive Components, Heat Exchangers.

Xcel Energy administered CAST Edison Electric Institute (EEI) Plant

Personnel Test

Journeyman Boilermaker-Class - Mechanic/Rigger

Coors/Bennet plant/work key skills test Golden, CO.

MSHA certified - metals/2005,2006, 2007, Current MSHA/2012

U.S. Department of Labor - I am certified MSHA Instructor/IS /IU -

(unlimited) Surface and Underground - 8/2006

U.S. Department of Labor - Certified MSHA Project Safety

Active Security Clearance

FFE Minerals USA Inc. - Certified - Gyratory Crusher Maintenance and

Operation 12/2005

Contact this candidate