Grand-Master Technician/Digital Production

Credentials of Kein (nine) Winters

Mableton, GA 404-***-****

My Knowledge & Experience

*Available: for a 2nd or 3rd shift Production position or a 1st or 2nd shift Bench/Depot Technician Position.

My Status **As a Grand-Master Technician with over 15 years experience I posses a 100% accurate

diagnosis 100% of the time. Being a Grand-Master Technician I can repair the volume of

work 4-5 techs can. I can repair any size digital production printer, Computer (PC) or

LCD TV and other devices.

*As a Digital Production Grand-Master with over 25 years experience I can operate any

production or wide format flat-bed printer whether I have used it before or not and

Master it in a short time. Being a Digital Production Grand-Master I can produce the

volume of work 3-4 production operators can. I am capable of Managing or

Supervising any Digital Production center or operation.

3/2009-Present Work for various National On-Site IT companies as an Independent Repair

Technician.

5/2008-2/2009 Repro Products, 4485 Atlanta Road, Smyrna, GA 30082, 770-***-****

Title: Production Operator

Production Manager: Jim Christensen

Responsibilities: Pre-Flight of Architectural and Engineering drawings using

Apprentice, PLP Plot Works Client and server, AutoCAD 2008, Adobe Acrobat 8.0. File

conversion of DWG files to PLP format for high volume printing mono color of

drawings. Jogging and binding of printed drawings. Equipment used: Xerox Wide

Format 721P Plotter, Oce 9800 Wide Format Scanner, Oce TCS500 Wide Format Color

Plotter with Scanner, Ricoh Aficio 2090, Lanier LD 0105 and Konica Bizhub Pro C500.

Departure: Laid-off, lack of work

2003-2006 OnForce of OnForce.com, 10 Maguire Road, Lexington, MA 02421, 781-***-****

Provider ID (4882) Tech. ID (7295) a website based company that provides clients

access to professionals with IT and Printer Service experience in the USA.

Responsibilities: Service Provider for On-Site Printer repair of High Speed

Digital Network Printers/Laser Office or Production printers, copiers, large format,

fax machines, color or mono. Short list of such name brands: HP, Canon, Xerox,

Lexmark…, sole technician for PriceWaterHouseCooper in 2005. Locate and order

parts maintain log of repaired equipment and parts replaced. Replaced printerboards,

fuser, printheads, feed problems, error codes, image drum, clutches, gears, drive belts,

power supplies, and so on. Have own tools and several service manuals. Highly

accurate troubleshooting methods for repair of any related device as a result of

mechanical/electro-mechanical/electrical/electronics experience and self-education.

Laptop, Desktop or Servver repair, replace motherboards, processor. Trouble-shoot and

repair Media Kiosk and ATM machines. Troubleshoot LAN/WAN wireless or cable,

install Router, Switch or Hubs, Residential or Commercial. Configure Router IP address,

Rollouts, Data Migration and Hardware upgrades. Flat Panel LCD/Plasma & Projection

TV reparing. CCTV installations

Status=In-Active: Work Part-time/days when fulltime employment not available.

Tech Rating=5.9/6

4/98-8/06 Pitney Bowes Management Service, F.C. Govt., 141 Pryor Street, Atlanta, GA

Title: Docutech/Imaging Specialist/2nd. shift unsupervised.

Mike Wilson 404-***-****/Site Manager

Responsibilities: Operate (1) Xerox Docutech DT-135, w/Unix 8mm Data tape

storage, (1) Docutech 6135 Publisher w/digipath . Operate networked (1) CLC 1150

w/ColorPass, (1) Canon CLC4000 w/Z6000 Server Command Workstation Software and

(3)Canon ImageRunners 105. On and offline booklet stitching, cutting and folding Usage

of Windows2000 Professional/XP, MS Office 2000, QuarkExpress, Adobe PhotoShop,

Illustrator and PageMaker. Annual Property tax notice over 250K mailout, setup using

MS Word and data import via MS Excel and variable data printing using Xerox

DocuPrint 180HLC w/Sun interface. Print-on-demand publications. Ability to

troubleshoot networked mono color as well as color print devices as operator or service

technician. Meticulous, highly organized and detail oriented. Finishing equipment

operated: GBC & Spiral punch/bind, FastBack, Baum 2020 Pile folder, Brackett

Padmaster2000, Challenge Champion Cutter model 305XG, Duplo DC48ST Collator

System Baum 714XLT folder.

Departure: End of Contract

1984-7/97 This time gap consists of early employment in Offset Press/copier operator experience

mostly in New York which I do not have documentation of company’s name or

experience would not be substantially worthy to list based on current objectives.

4/84-12/87 Basic Training and Advanced Individual Training (AIT) U.S. Army.

Location: Fort Lenardwood, Missouri

Military Occupation Specialty (MOS) Heavy Equipment Operation required of

(AIT). Duties: Operate Bulldozer, Scraper, Grader, Scopeloader, Back-hoe, Forklift &

drive Dump truck. Received Honorable Discharge

12/87-1/88 U.S. Army Paratrooper Training -Fort Benning, GA

Received Airborne Wings at Graduation Ceremony

2/88-2/89 Assigned to U.S. Army 82nd Airborne Div., Fort Bragg, NC Active Duty status:

GT Score 110, pass physical and written test to qualify for Flight training. Received

certificate for passing (3) months Flight (helicopter) simulator training.

Airborne Engineer (Heavy Equipment Operator)

Education:

4/2006 Learning how to use Electronic CAD software for Schematic and PCB design and

Self-Educated practice. Block Diagrams, Circuit Diagrams, Circuit Symbols - including the functions of

components, Electricity and the Electron, Series and Parallel Connections Voltage and

Current, Meters - voltmeters, ammeters, galvanometers and ohmmeters, Multimeters -

Resistance - resistors in series and parallel, conductors and insulators, Ohm's Law -

including the VIR triangle and calculations, Power and Energy, AC, DC and Electrical

Signals, Oscilloscopes (CROs) - setting up; measuring voltage and time, Power Supplies,

Transducers, Voltage Dividers, Transistor Circuits, Analogue and Digital Systems, Logic

Gates, Capacitance and Uses of Capacitors, Impedance and Reactance, 555 and 556 Timer

Circuits, Counting Circuits, Quantities and Units used in Electronics, Books about

Electronics.

Several Subjects will be for refreshment only.

2/2004 New Engine Replacement in 1990 Mazda RX-7

Order Rotary 13B engine and rent engine hoist. Drain all fluids, begin removal process of

Air Intake, Exhaust Manifold, Radiator, Alternator, Water Pump, Air Compressor,

Emission Solenoids, Power Steering Pump, Battery, Wires, unbolt from

manual transmission then remove engine mounts. Connect engine hoist and remove

engine. Having never replaced an engine before I consider the experience to be an

education as well. Car runs as close to new specifications as possible, I do all repairs

whether its mechanical, electro-mechanical, electrical or chemical.

2004 Windows 2000 Professional and Server Family.

Self- Educated Possess accurate network trouble-shooting methods, very analytical and technical minded.

Ability to read and immediately apply. Full knowledge of computer hardware functions as

it relates to its intended use as PC, Server or workstation. Ability to fully disassemble,

assemble and troubleshoot any Laptop or Desktop, upgrade or replace at a technician level.

Ability to design and publish basic Website Using Frontpage98, knowledge of

LAN/WAN, wireless or cable systems TCP/IP and other applicable protocols. Knowledge

of how Search Engines Index Web pages. Ability to setup and configure network printer

as well as troubleshoot and repair printer hardware at a technician level. Have technician

tools including full Security Screw Set. Ability to call Manufactures and purchase parts,

require very little need for technical assistance. Ability to setup and configure Routers or

Switches whether LAN, WAN wireless or not. Currently studying Microsoft Visual

InterDev 6.0 Programmer's Guide for a better understanding and usage of Scripts.

Design and Host my own Website for learning purposes using FrontPage98,

Windows2000 Server and IIS 5.0, setup DHCP Server and DNS Server. Learning how

to write HTML tags such as, <A \ >, <BODY>, <FORM>, <SCRIPT>

09/2001 Docutech Digipath Certified Training at Xerox Corporation Norcross, GA

Training Facility. Training consists of all phases of scanning and job submission using

Docutech 6135 Publisher. Xerox ACT trained as well.

7/2000 CompTIA A+ Certification CompTIA ID# COMP10330365

5/2000 Microsoft Certified Professional MCP ID# 1327737

10/99 Install, configure and troubleshoot Windows NT Server 4.0

Self-Educated Network for hands-on training of home LAN network Lab for MCP Certification. Setup

and configure hardware (partition hard drives, install Adapter cards, modems) and

software of, (3) Laptops, (2) with NT Workstation and (1) w/Windows98. Setup and

configure, (2) Desktops, 1st. as Primary Domain Controller, 2nd. as Enterprise Domain.

Setup and configure RAS for Dial-Up Networking. Ability to perform Unattended

Network Installations. Other setup and configurations include, TCP/IP, NetBEUI

protocols and DHCP Server, able to Administer Windows NT Network as an

Administrator. Network Industry education is on-going, ability to grasp and apply

quickly. Also familiar with Linux RedHat software GUI Unix based commands and

Kernel Architecture.

12/98 MCP self-paced Training Kit course for Windows NT Server 4.0,

self-study NT Workstation 4.0, Ms Internet Information Server w/Proxy Server self-

paced Training Kit and Microsoft TCP/IP Training. Diagnose, Install, and repair of any

Laptop, Desktop or Server. I own most necessary technician tools, such as Torx Precision

Screwdrivers. Extensive exposure to and use of Laser mono and color printers. Can

diagnose, repair and explain Laser printing process in detail. Ability to read, comprehend

and apply use of technical repair manuals. Ability to setup any hardware, replace,

upgrade of existing hardware, such as USB, Motherboard replacement, CD or DVD

Writers.

10/88-1/89 Fayetteville Technical College/main campus, Fort Bragg, NC

Computer Basics of MS-DOS 4.0 commands/ Studied Basic Electronics and Algebra

9/83-2/84 Printing Trade School, 229 Park Ave., N. Y.

Studies consisted of all phases of small Offset press printing. A prioritized description of

studies, ink mixing, 2-4 color printing, plate making, stripping and press setup. Training

equipment used: AB Dick, Chief-15 and Multilith 1250 press.

Certificate of Completion.

8/79-5/83 Sarah J. Hale H.S., Brooklyn, N. Y.

Studies consisted of Science, Mathematics, Typing, Gym and Woodshop

Received GED

8/74-5/79 Holy Spirit Grammar School, Brooklyn, N. Y.

Studies consisted of Grammar, Arithmetic, Science & History.

Certificate of Completion.

References provided but not required, my Knowledge & Experience are simply

facts and no one’s interpretation of my abilities will be superior than my own

assessment or what I am capable of:

Dominic Carter, Owner of ADC Solutions 404-***-****, Onsite IT and

Computer/Printer/Copier & Flat Panel LCD/Plasma repairing business.

Leroy Francis, U-Know Designs, Sign and T-shirt Printing 404-***-****

Jim Christensen, Production Manager of Repro-Products, 770-***-****

To Date: over (15) years experience of Network Printers/Copiers/Production Printers/Fax/Computer… repair.

To Date: over (25) years of Reproduction printing, Digital Imaging, Large-Wide Format, copying, binding,

cutting, folding, scanning, high volume publisher printing experience.

Contact this candidate