Resume from
Steve Canaday
Reno, NV 89521
Degrees
UCLA Los Angeles, California: Major, Application Programming, Certified
Programmer September 1982
Clark College Vancouver, Washington: Major, Manufacturing Systems
Maintenance Technology, AAS March 2000
Clark College Vancouver, Washington: Major, Industrial Electronics
Technology, AAS March 2000
Western Baptist College Salem, Oregon: Major, Management and
Communication, BS graduation May 2002
Area served: -
Category:
Unverified listing
Electrical Journeyperson certificates held:
Received from License Type License Number Date Received
State of Washington Journeyperson CANADSA113NE 08/05/1989
State of Oregon Journeyperson 15060J 08/28/1997
State of Washington Administrator CANADS*112NE 08/05/1989
State of California Electrical Contractor 524944
02/28/1988
WORK EXPERIENCE
A:)
Company Name: City of Carson City
ADDRESS: 3505 Butti Way
Carson City, NV 89701
From 10-2008 to 2-2011
Title: Electrical/Signal Tech III
DUTIES: Assist with plans, troubleshoot, repair and install wiring
circuits, transformers, motors, protective devices, switches, control
devices, alarm systems, and lighting systems.
Assist in the design, installation, testing, calibrating, maintaining
and repairing of the electronic process control systems and
components, and data acquisition systems including: flow measurement,
level measurement, process control systems and instrumentation,
programmable logic controllers and alarm systems Contact vendors and
other agencies to determine the availability, applicability and
performance of components.
Purchase required parts and equipment and maintain accurate records of
work performed, materials used and associated costs. Work with City
or contract engineers to specify or recommend equipment and designs
for process control and data acquisition systems. Inspect and test
components installed by contractors. Performed all duties in a safe
manner.
Perform related duties and responsibilities as required.
Plan, troubleshoot, repair and install wiring circuits, transformers,
motors, protective devices, switches, control devices, alarm systems, and
lighting systems as per the NEC. Design, install, test, calibrate, maintain
and repair electronic process control systems and components, and data
acquisition systems including, flow measurement, level measurement, process
control systems and instrumentation, programmable logic controllers, and
alarm systems.
Install, maintain and repair traffic signal equipment as directed. Contact
vendors and other agencies to determine the availability, applicability and
performance of components. Purchase required parts and equipment and
maintain accurate records of work performed, materials used and associated
costs. Assist in working with City or contract engineers to specify or
recommend equipment and designs for process control and data acquisition
systems. Inspect and test components installed by contractors.
Perform related duties and responsibilities as required. Utilize proper
safety precautions related to all work performed. Use computer to produce
records of activities program soft-starts for motors, program PLC's to
control electrical systems, use Microsoft Office Word to create written
reports, send and receive email, and conduct research via the Internet.
Travel between jobsites. Move about on foot over rough terrain, and get in
and out of a vehicle to conduct inspections. Review and evaluate employers'
written programs. Visually inspect worksites to identify safety and health
hazards and offer advice on abatement. Work with contractors to improve
electrical installations.
Install electrical equipment using the NEC as an installation guide.
B:)
Company Name: Labor & Industrial
ADDRESS: 312 SE Stonemill Dr Suite 120
Vancouver WA 98684
From 3-93 to 10-2008
Title: Electrical Inspector
Inspect all buildings construction and remodels including residential
and commercial electrical building installations for compliance with
NEC and Washington Administrative Code (WAC). Ensure safe and quality
electrical and safe installation of electrical systems.
Assist customers in resolving technical questions; give interpretation
of NEC and WAC code as set forth by the department. Survey job sites
for proper progression of job and assure contractors are in ratio with
regards to the number of journeymen to apprentice.
Respond to inquires regarding jobs and whether or not the job is being
done by licensed contractors and journeymen and with proper permits.
Strive to make timely and quality inspections. Inspect high tech.
Installations like Sony, HP and Wafer Tech computer chip plaint.
Inspect all electrical installations of every voltage and amperage.
Work with contractors to improve working relations and improve
customer service. Conduct independent safety inspections in industries
that could include manufacturing, construction and other industries
and locations as assigned.
Review and evaluate employers' written programs. Visually inspect
worksites to identify safety and health hazards and offer advice on
abatement. Investigate accidents to identify root cause and
contributing factors.
Investigate employee complaints and referrals about safety and health
hazards in workplaces. Issue citations, propose monetary penalties,
and write technical reports documenting employee exposure to safety
and health hazards that are violations of WISHA (Washington's OSHA)
standards.
Defend citations at appeal hearings, both informal and formal. Ensure
abatement of hazards by follow-up inspections or alternate means. Use
a variety of inspection tools, equipment and measuring devices.
Use computer to produce records of inspections and inspection
schedules, use Microsoft Office Word to create written reports, send
and receive email, and conduct research via the Internet. Travel
between jobsites. Move about on foot over rough terrain, and get in
and out of a vehicle to conduct inspections.
C:)
Company Name: Clark Collage
Address: Vancouver, WA
From 9-99 to 6-2002
Title: Instructor, Computer, Electronics
Duties: Teach students in the subjects of Motor
Control, Electronics, Digital Logic, and Electrical systems. These courses
were designed to give the students an AA or AAS degree in a variety of
disciplines.
D:)
Company Name: Canaday Electric
Address: P.O. Box 3736
Federal Way, WA
From 3-88 to 3-93
Title: Electrical Contractor & Administrator
Duties: Supervise eight journeymen in residential and
commercial electrical work. Survey and bid residential and commercial
electrical jobs and obtain electrical permits.
Main duties were:
Study NEC and WAC code to ensure jobs were installed in compliance
with state and local codes.
Schedule and coordinate job activities, train and assist employees in
troubleshooting problems.
Punching and inventory control, track job and material costs.
Access employee performance for promotion and raises and interviewing
applicants for employment.
Hold safety meetings job progress and job improvements suggestions.
Process payroll and time cards and handle accounts receivable and
accounts payable.
Supervise 2 clerical, eight journeymen and 2 apprentice trainees in
residential and commercial electrical and building construction work.
Survey and bid residential and commercial construction and electrical
jobs and obtain permits to perform construction work.
Study NEC and WAC code to ensure jobs were installed in compliance
with state and local codes. Schedule and coordinate job activities,
train and assist employees in troubleshooting problems. Punching and
inventory control, track job and material costs.
Access employee performance for promotion and raises. Conduct
interviews with applicants for employment. Hold safety meetings, job
progress and job improvements suggestions meetings. Process payroll,
time cards and handle accounts receivable and accounts payable.
E:)
Company Name: Department of Water and Power
Address: 1630 N. Main St., LA, Ca. 90052
From 3-83 to 10-89
Title: Electrical Repair Supervisor
Duties: Supervise and coordinate the work of 20+ journeymen
(out of a shop of 130 electrical journeymen and apprentice) with an
annual budget of $10 million to perform shop and field repairs to
maintain power generation and support equipment. More specifically,
I supervised the sub-shops of cranes, elevators, wiring, AC
maintenance and DC generation maintenance.
My other duties included the:
Development and writing of contracts for goods and services
Knowledge of supervisory and administrative procedures
Submitting annual and five-year budgets for personnel and equipment
Enacting cost control and efficient personnel utilization
Awareness of the work hazards and necessary safety precautions
Use of clearances to work on or near high voltage electric equipment
Scheduling work between shops, within the shop, and on large repair
jobs
Read and understand electrical circuit plans and diagrams
Moving and installing heavy electric station equipment
Compiling and dissimulation of MSDS info
Maintain working relationships with vendors and departmental heads
Uphold working rules and company practices, including implementing
and supporting affirmative action, equal employment opportunities and
sexual harassment policies.
Work on and around all voltages form 120 VAC to 500 KVDC on the
Sylmar Receiving station.
F:)
Company Name: UCLA
Address: LA, CA.
From 1-80 to 3-83
Title: Computer Lab Instructor
Duties: Supervise the computer lab and instruct the students in the use
of all of the computers at UCLA, such as the main-frame, HP 3000, and the
IBM PC's. Instruct the students in the use of all the software taught at
ULCA including word, excel, auto-cad, along with the computer languages
including Basic, Pascal, Assembler, C, COBOL, and operating systems like
DOS, JCL, WILBER, CPM, and Unix
Education/Training
Institution Major Subject Date Units/Hours
Completed
Cert./ License
Carson High School General 1-73 Diploma
Yes
Harbor Occupational Marine Electrician 1-73 1422
Hours Yes
TPC Electrical Maintenance 12 courses 2-79
Certification Yes
DWP Supervision 4-85 Certification
Yes
KEYE Supervision 1-83 Certification
Yes
TPC Intro to Electronics 3-77 Certification
Yes
TPC Batteries & DC Circuits 5-77
Certification Yes
TPC Transformers & AC Circuits 6-77 Certification
Yes
TPC Electric Measuring Instruments 7-77
Certification Yes
TPC Electric Protective Devices 8-77
Certification Yes
TPC DC Equipment Controls 9-77 Certification
Yes
TPC Single Phase Motors 10-77 Certification
Yes
TPC Three Phase Motors 11-77 Certification
Yes
TPC Three Phase Systems 12-77 Certification
Yes
TPC AC Motors 1-78 Certification
Yes
Ramset Co. Ramset Power Tool 5-84 Certification
Yes
DWP CPR Modular training 9-84 4 Hr
Yes
DWP Operation Orders "Clearances" 4-84 4 Hr
Yes
DWP Fire Extinguishers 9-84 2 Hr
Yes
DWP Gas Welding Apparatus 2-85 1 Hr
Yes
DWP Fork Lift Safety 2-85 8 Hr
Yes
DWP Safety Tag Training 1-85 4 Hr
Yes
P&H Co. Mechanical Maintenance Overhead cranes 10-86
Certification Yes
DWP Selection Interview Training 7-87
Certification Yes
Shipley Effective Business Writing 11-87
Certification Yes
DWP Crane Operator 1-84 License
Yes
DWP Lock Out and Tagging 5-86 Certification
Yes
Paul Monroe Hydraulics Hydraulics #1 (Intro.) 5-80
Certification Yes
Paul Monroe Hydraulics Hydraulics #2 (Advanced) 7-week class 3-81
Certification Yes
Tower Hydraulics Theory of Hydraulic 5 day seminar 6-80 40 Hr
Yes
Electronic interfacing
Southern Calif. Gas Industrial Combustion 7-80
Certification Yes
Armco Steel Industrial Furnaces 6-76 Certification
Yes
CDI Computer Repair 9 month course 9-82
Certification No
El Camino College Intro. to Semiconductors 6-75 4
Smstr Yes
Cerritos College Fundamentals of NC's 6-79 3 Smstr
Yes
UCLA Business & Management 9-82 36 Qtr
Yes
Application Programming
Keye Productivity Intro. to Management seminar 1-83
8Hr .6 CEU's Yes
DWP Intro. to Supervision 4-85 Certification
Yes
DWP Management 9-86 Certification
Yes
Harnischfeger Institute Mechanical Maintenance 2 day seminar
10-86 16 Hr / Cert. Yes
DWP Selection Interview Training 7-87
Certification Yes
Shapely Associates Effective Business Writing 11-87
Certification Yes
American Red Cross Cardiopulmonary Resuscitation 2-88
Certification Yes
American Red Cross Multimedia Standard First Aid 2-88
Certification Yes
California State Electrical Contractor's License 2-88
License Yes
Washington State Journeyman Electrician's License 10-89 License
Yes
Education/Training
Institution Major Subject Date Units/Hours
Completed
Cert./ License
Washington State General Electrical Administrator's 10-89 License
Yes
Washington State Electrical Contractor's License 11-89
License Yes
Highline Community Human Relations 2-89 5
Qtr Yes
Highline Community Persuasive Writing 2-89
5 Qtr Yes
Highline Community Advertising 2-89 5
Qtr Yes
Clark College Spanish 101 12-96 5 Qtr
Yes
Clark College Spanish 102 Start
Winter Qtr
Perry Technical Institute DC Drives Principles 5 month course 3-90
Certification Yes
L&I Policy Manual on-line 8-93 1 Hr
Yes
L&I Hostile Clients 6-94 3 Hr
Yes
L&I Confined Space 7-94 3 Hr
Yes
L&I Fall Protection 8-94 4 Hr
Yes
L&I Lock out/Tag out 8-94 4 Hr
Yes
L&I Ladder Safety 8-94 4 Hr
Yes
L&I Emergency Escape Respirators 11-94 2
Hr Yes
L&I Hazardous Materials 11-94 2 Hr Yes
L&I Emergency Escape Respirators 11-94 1 Hr
Yes
IAEI High Voltage / Code Change 3-95 16 CEU's
Yes
L&I Defensive Driving 8-95 4 Hr
Yes
IAEI NEC Calculations 4-95 8 CR's
Yes
Washington State Real Estate Salesman 4-95 License
Yes
IAEI Code Changes 10/2\5/95 24 Hr /
8 CEU's Yes
IAEI Code Analysis 12/95 8 CEU's
Yes
L&I Electrical Septic Systems 1-96 2 Hr
Yes
L&I Over 600 Volts 1-96 2 Hr
Yes
L&I Drug & Alcohol Policy 3-96 2 Hr
Yes
IAEI Tri-Chapter Training NEC 3-96 2 Hr
Yes
IAEI National Certification General Inspector 4-96 8
Hr Yes
IAEI National Certification Plain Review 4-96 8
Hr Yes
IAEI NEC UPDATE 4-14/15-97 16 Hr
Yes
Breakers/ Fuses "
Transformers/ Short circuit Current "
Signs "
Testing Methods "
Breaker Applications "
All the IAEI class/meetings listed above dealt with NEC code.
COMPUTER LANGUAGES PROGRAMMED WITH
Language Machine CPU
Basic Apple/Atari 6502
MS Basic IBM PC 8088/80286/80386
Assembler Apple/Atari 6502
Assembler IBM Main Frame 360/370
COBOL IBM Main Frame 360/370
JCL IBM Main Frame 360/370
Pascal IBM Main Frame 360/370
Pascal UNIX VAX
FORTRAN IBM Main Frame 360/370
C UNIX VAX
C Mac/Atari/Amiga 68000,10,20
C++ Borland IBM PC 8088/80286/80386/80486
Education/Training
OPERATING SYSTEMS
Operating System Machine Used on
CPM CPM Based HP
MS-DOS MS Based 8088,80286,80386
UNIX VAX & 80286,80386,68000,10,20
Wilber IBM Main Frame
TSO IBM Main Frame
TOS Atari 68000
MS DOS IBM PC Based 8088,80286,80386,80486,80586
Windows / Windows 95 IBM PC Based 8088,80286,80386,80486,80586
APPLICATION PROGRAMS
Program Name Program Type
Word Star Word Processor
1St Word Word Processor
WordPerfect Word Processor
Lotus 123 Spreadsheet
VIP Spreadsheet
dBase III,IV Data Base
Norton File Utilities
Microsoft Word Word Prosser
Microsoft Excel Spreadsheet
KeyCAD Engineering CAD
Harbor Occupational Trade School
Wilmington
August 1971
January 1973
Marine Electrician