Design Project Manager
Resume:
MICHAEL MINH THANH
**** *********** **. *******, ** 90680
************@****.***
OBJECTIVE: Seeking a Senor Cad Designer
CAD KNOWLEDGE:
. 2D-Intergraph PDS- 6.3, 6.5
. 3D-Intergraph PDS 6.3, 3D
. MicroStation 4.5, 5.07, Se, J, 8
. 3D-AutoPlan for Pining, Structural 2008
. 3ParaMap Laser Plan
. AutoCAD R12 to R2008
. ACCET (For ARCO)
. Architectural Desktop 2.0, 3.0, 2009.
. COMPUTER KNOWLEDGE:
. Window 2000, XP, SE, 2000
. Microsoft Office 2000, XP, 2007
. Lotus Note 5.0
. Adobe Acrobat 8.0
. Adobe PhotoShop 6.0,7.0, CS3
. HTML Internet-Design
HISTORY OF WORKS:
PV Solar System Design: (Solarpro Neighborhood) Jan 2011 to Present
Responsible PV Design, Cad set up and create Submittal plan for PV Grid
Tied for residence and commercial. Performing Material take off and
being a job site Superintendent.
Using AutoCad 2008 and Architectural Desktop 2008 to create and maintain
drawings.
Contact Cities and utility company for submittal and inspection.
Piping Design: (Project Line Technical Services, Inc.) Apr 2008 to Jan
2009
Responsible for Piping Design; Cad set up and consultant.
Piping: Design including: Equipment lay out, Piping Plan Layout, doing
sketch and cad lay out for location Plot plan; Isometric markup,
Checking Iso Drawings, Revised and QA/QC.
Structural: Pipe Support design per standards. Custom details base on
location.
Cad Support: Create Border, Legend, and Isometric Blocks for AutoCad.
Set up Profile for Isometric drawing. Doing support and Consulting on
Isometric Cad works.
Piping Designer: (IQA Solutions Inc.) Apr 2007 to Feb 2009
Responsible for create and maintain Model, drawings, Isometric. Complete
Package including Model, Plan, Detail, and Bill of Material- Using
AutoPLAN (Piping, Isometric, & Structural), AutoCad 2006, and
Microstation (V8). Design base on OSHA, REPs, Piping Specifications,
NBC, CBC, IBC, MBC, ASTM. Support Engineers and Cad Works.
Piping: Design including: Create P&ID Drawing, Piping Plan Layout,
Piping 3D Model; General Isogent and Bill of Material; Using AutoCad/
Microstation to Create Isometric Inspection Drawings, Pipe Support Plan
and Details.
Structural: Design including: 3D Model of Platform, Stair way, Handrail,
and Ladder. Plan Design using AutoCad including Foundation, Framing,
Elevation, Section, Fire protection and all details related base on
design criteria and Refinery Standards. Complete Construction Document
and Drawings Package in Coordinate with Engineers and between
Disciplines.
Mechanical: Using Auto Cad to Design drawings for Vessels, Ducting, Air
Pre-heater, Air mixer, vessels, Tanks, Filters. Design including Plans,
details, and construction Document with Fabrication Drawings & bill of
material or checking Vendor Shop Drawings.
Electrical: Working direct to Electrical Engineers to support
electrical design for Pump stations on Crain Deck. Create electrical,
doing conduits layout, Table, lines and cable schedule, Doing 3D and
elevation view to support Project.
Civil: Base on P&ID, Equipment spec-sheet, calculations, surveys, and
ParaMap Laser Scan result, to layout and create Plot Plan, Location
Plan, Grading Plan, Foundation Plan and Details including Sewer and
under ground piping base on REPs. Doing QA/QC on Civil drawing.
Cad Work: Base on the Client Standard (Conoco-Phillips and Exxon-Mobil)
to Create and maintenance Cad File. Create Border, Titter Blocks, setup
Profile, Templates, create Text Styles, Dimension Styles; Set up Plot
Styles, Pages Setup. Create Blocks and Libraries. Trouble shoot and
consulting Cad Works.
Project Designer / Project Manager / Owner: Apr 02 to Apr 07
(Self Employ _ MT Planning Design)
Using Architecture Desktop 2.0, 3.0 (AutoCAD 2000i, 2002, 2003 in both
2D and 3D) to Completed Drawing Package and Construction Document for
Custom Home and Light Commercial buildings.
Complying all CBC, NAC, CPC, CMC, CEC, NEC, CFC and Local Zoning and all
Regulations, Requirement of the Government Agencies.
Architecture Custom Home, Multi Family, Light Commercial, Retail and
Tenant Improvement. Design Plans and 3D Model including all
Interior/Exterior Design: Site, Floor, Elevation, Landscape, and
Architecture Details.
Structural Design including: Foundation, Wood Framing, Light Metal
Framing, Roof and Ceiling, Sections, and all Structural Details,
Complete Construction Document and Drawings Package in Coordinate with
Engineers for Design Criteria, Soil Test, Structural Calculation, Civil
Grading Plan, Title 24...
Mechanical Design including: Plumbing Plans and Isometric of Water, Gas,
Drain and Vent, Sewer Systems, HVAC, Mechanical Details and Legend.
Electrical Design including: Electric Plan, Detail, and Legend.
Completed Concept Design to Finished Drawings with approved of Cities'
Agencies or Department.
Cooperating between Owners, City Agencies, Engineers, Designers, and
Contractors to meet the requirement of both Clients and California Code.
Field Works including: Job Site Superintending, Architecture and
Structural Consultant.
Perform Custom Houses, Rooms' Additions, Remodel. Light Commercial
Buildings including Apartments, Tenant Improvement Clinics, Offices,
Restaurants, Bakery, Beauty Salons, and Shopping Strip.
General Constructor: including Room addition for Residential, and Tenant
improvement
Perform Construction, Supervising & Management including all paperwork
and Accountant; inventory and Material; Cooperating between City
Agencies, Owners, Engineers, Cad Designers, and Sub Contractors.
Trades Field Works including: Foundation & Framing Construction, Plumping,
Electric and Features; Exterior & Interior Finishing;
Structure Cad Designer: (W.Koo & Associates, Inc.-PBS&J) Nov 02 to May
03
Responsible for setup and maintain Drawings in both Auto cad (R14,
R2000) and Microstation (Se, J, 8) Created and maintenance complete set
of Structure Drawing for Bridges and Harbor including Sites, Plans,
Elevations, Sections, and Details. Responsible for Cad's Documentation,
Create Profiles, Templates for Auto Cad Projects for Caltrans projects,
and step-by-step How To Guide for Cad Operators. The Most resent
Projects were LOS ANGELES HARBOR 100, 101, and 100 South.
Piping / Cad Designer: Fluor Corporation Dec 96 to Apr 02
Piping and Instrumentation Diagram Designer: (Duke-Fluor Daniel) Apr 00
to Apr 02
Using AutoCAD (R 2000i) and Intergraph 2D (R 6.3) to design P&ID.
Working on all of the present projects (ONETA, WATERFORD, MOSS LANDING,
BERGEN 2, OXY CONVENT, MOUNTAIN VIEW, BASTROP, DEABORN, LTV, LINDEN,
FORNEY, LAWRENCEBURG, NEWINGTON, CHERRY POINT
OSP Designer/Civil Cad Designer: Jun 99 to Apr 00
Fiber Optical Telephone line -Under Ground Project (Level 3-Telecom,
Fluor Global)
Set up and design the Out-Side-Plan drawings for the City-Packages to
meet the requirement of San Diego City, Long Hal, San Francisco (CA),
and Phoenix City (AZ).
Maintaining the as built drawings and Turning Over Package for Houston-
TX, Detroit-MI, and Los Angles city to the Level 3 Standard to be ready
for GIS Development as future requirement.
Working with Cities maps and survey note to maintain the accuracy
between Fiber Optical Lines and Utilities lines of the cities.
(Including Sewers, Electric, Gas, Water, Cable, Phone, etc
Piping and Instrumentation CAD Designer: Dec 96 - Jun 99
Developed and Maintaining Piping & Instrumentation Diagram, Piping Flow
Diagram, and Piping Material Diagram: (Fluor Daniel)
Using AutoCAD: ARCO, LG CALTEX, INDIANA HARBOR, ARABIGH, TEXACO
EVERGREEN, BANGKOK, PERTAMINA, and FINA.
Using MicroStation to developed and maintaining P&ID, PFD, and MFD for
projects:
DUKE, INDIANA HARBOR, and UOP.
Using PDS-2D to developed and maintaining P&ID, PFD, and MFD for
projects:
IRVING OIL, PMEX, and HAMACA.
Create P&ID Legends, design Blocks for projects: LG CALTEX, INDIANA
HARBOR, RABIGH.
Contractor/ Carpentry: (Cong Ty Xay Lap So Mot) Mar 87 - Oct 88
Commercial Building Contractor, Carpentry: Responsibility for Building
From-work for Foundation, Column, Concrete Pouring, Concrete finishing.
Doors and Windows Installation, Roof Framing, Roofing, Painting
EDUCATION AND TRAINING:
M.T.I. College:
Associate Degree in Architectural CAD & Design: 2007
CSLXPRESS, COLLEGE: 2005
Contractor State License Board (Law and Business)
Contractor State License Board (General Building Contractor)
FLUOR DANIEL TRAINING PROGRAMS:
Microsoft Excel 2000 Advanced, 2002
Microsoft Power Point_2000, 2002
Lotus Note 5.0, 2001
Auto Cad R 2000i Advanced (CadCam Center International), 2001
Auto Cad R 2000i Fundamentals (CadCam Center International), 2001
Auto Cad R 14 First and Second level, 2001
Mastering Today's AutoCAD 2000 (Awareness Learning, Inc.), 2000
Turn-Over Package and Testing Training (OTDR), 2000
Window_2000, 2000
DESIGN ENGINEERING TECNOLOGY PROGRAM:
Piping & Equipment Design - Plan Design Systems PDS-3D, 1998
Piping & Instrumentation Diagram - Plan Design Systems PDS-2D, 1998
Advanced Material Control, 1997
Microsoft Windows NT 4.0 User Fundamentals, 1998
Santa Ana College, CA, 2001
Certificates Advanced of HTML, Internet
Graphic Design
M.T.I. College, CA, 1996
Diploma Computer Aided Piping Design
Fluor Daniel Based Piping Design Fundamental Piping Design.
Contact this candidate