Injection Molding Maintenance
Resume:
AROCER ESTRELLA CAMILO
Brgy.Townsite, Mariveles,
Bataan, Philippines2105
Email Address: ************@*****.***
CAREER OBJECTIVE:
To seek for a challenging position in a reputable company that offers maximum personal growth
and advancement, applying the knowledge and extensive work experience that best suited my
qualification as a mechanical engineer and injection molding technician personnel.
SUMMARY OF EXPERIENCE:
First worked at Edison Bataan Co-Generation Corporation companyin AFAB Mariveles,
Bataan as MACHINE SHOP ASSISTANT from May 2004 to October 2004.
JOB DESCRIPTION:
Accomplished machine shop daily activities, improvement report and equipment repair
record during repair maintenance.
Improvements/modification on machines prior to operation.
Check, Monitor, and Schedule preventive maintenance.
Accomplished necessary check sheet and machine as required.
Participate in the analysis of quality problems related to machines.
Previously Working at Mitsumi Philippines Inc. from October 2004 to July 2012. An ISO
9001, TS16949, ISO 14001 and OHSAS 18001 certified company and the leading electronics
manufacturer company in AFAB Mariveles, Bataan. I am holding the position of PLASTIC
INJECTION MOLDING ASSISTANT in this company under Parts Manufacturing Department,
which consists of four sections, the INJECTION MOLDING, PRESSING, M/C SHOP and the
QA section.
JOB DESCRIPTION:
MOLDING TECHNICIAN (2004 – 2006)
Operates molding injection machine: nissei, JSW, Sumitomo and Toyo machine including
the different dryers for heating up of virgin/recycled materials, heating up of Die using
thermo controller or cooling water/chiller for other kind of model.
Perform set-up and take-out of molding die by using over head crane.
Making condition or command to follow the machine and synchronized pneumatic robot
that will get the plastic inside the die.
Setting of timer that continuously get the product without any trouble or alarm level to
the conveyor, to check the operator, measurement by Q.A. if it is good for production.
DAILY ACTIVITIES:
Conduct mold set-up.
Conduct mold trial.
Conducts adjustment of injection parameter.
Conduct machine checking status.
Fills up machine & equipment record form.
Conduct cleaning of crusher.
Conduct cleaning of material dryer.
Conduct material loading during production.
Conduct cleaning of mold in production.
Checking of mold temperature.
Implement corrective/preventive actions for lot-out.
5S.
MONTHLY ACTIVITIES:
Prepares & conducts machine maintenance plan
Make & implement improvements for machine & in production line.
Conducts machine production schedule plan.
Conducts machine maintenance.
MACHINE MAINTENANCE ACTIVITIES:
Movable toggles, robot and machine lubrication.
Oil monitoring.
Supply of compressed air monitoring.
Vibration analysis.
Temperature monitoring.
Supply of water in and out of machines as well as thermo controller monitoring.
Heaters and wirings monitoring.
Pumps and piping’s leak monitoring.
Pneumatics air leaks monitoring.
Fill-up of machine maintenance record form after inspection.
MOLDING MAINTENANCE TECHNICIAN (2006 – 2009)
Performs Regular maintenance of mold die used in production
Carries out all instruction from Supervisor/Dept. Manager pertinent to the quality
and productivity system
Prepares mold/die maintenance plan
Updates mold/die maintenance record
Prepares order of maintenance parts for mold/die
Participates in group activity to do a certain task (multi-disciplinary approach)
Responsible in maintaining and implementation of 5S
Conducts mold improvements to improve quality and productivity
Fabricate mold/press die parts, jigs and fixtures
Prepares implements and monitors pokayoke (error proofing) for the prevention
of pokamis (careless mistake).
DAILY ACTIVITIES:
Performs regular maintenance of mold/die used in production.
Prepares daily mold/die maintenance activities.
Operation of lathe machine.
Operation of grinding machine.
Operation of milling machine.
WEEKLY ACTIVITIES:
Makes order of mold/die parts for maintenance and spare.
Checking of mold/die for restoration.
Follow up ordered parts in warehouse.
MONTHLY ACTIVITIES:
Prepares mold/die maintenance plan.
Updates mold/die maintenance records.
Performs regular maintenance schedule of mold/die.
2009-2010 (ONE YEAR TRAINING IN JAPAN)
ENHANCING, IMPROVING AND WIDENING MY SKILLS AND
KNOWLEDGE IN
PLASTIC INJECTION MOLDING PROCESS.
ENHANCING, IMPROVING AND WIDENING MY SKILLS AND
KNOWLEDGE IN
MOLD/DIE MAINTENANCE.
STUDYING JAPANESE LANGUAGE IN WRITING, READING AND
SPEAKING
MOLDING TECHNICIAN IN-CHARGE (2010 – JULY 24, 2012)
Perform routine preventative / corrective maintenance on injection molding
machines, dies, robotics, facilities and other support equipment.
Dismantle, adjust, repair, assemble and rebuild molds and equipment according to
layout plans, blueprints, operating or repair manual, rough sketches or drawings.
Lead or support troubleshooting and mechanical repair of equipment and
processes that may arise during molding process.
Use of machine shop equipment and fabricating tools to create or repair parts
Maintain logs and records used in recording, tracking and improving equipment
overall operation, maintaining Standards of Operation and Procedures.
Conduct repair on damage mold / die and make countermeasure to prevent
reoccurrence.
Complete maintenance work order requests when required in a timely,
professional manner.
Lead to perform preventive and corrective maintenance in a team atmosphere.
Ability to read, understand and create/modify CAD data, hydraulic, pneumatic,
and piping diagrams, and electrical schematics.
Ability to research parts, drawings, diagrams and schematics.
Prepare and update monthly maintenance plan and daily maintenance record.
Ability to work SAFELY by following policies and procedures in an industrial
environment.
Implement countermeasures of daily problems encountered in line.
Implements corrective / preventive actions in production problems.
Checking of machine status & reports to Supervisors/Manager any machine
abnormalities.
Conducts trials on newly arrived molds/die.
Adjust machine parameter if needed to maintain target quality in terms of
appearance and dimension.
Fill-up Mold/Die Sample Inspection Request Card.
Make & implement improvements.
Implementation of 5S activities.
Inspect newly arrived mold/die before conducting 4M trials.
Performs other responsibilities as per instructed by supervisor and manager.
Other duties as required and assigned.
Presently working at Brother Industry Philippines Incorporated as a production
molding junior supervisor and I designated to lead the role and to lead the
responsibility of working in mold maintenance section. Our company is a new
company and as a matter of fact we transfer in our first built building factory only last
February of 2013, Here in this company as of now our main product that plan to
produce is PRINTER. But of course as years goes by, the company plan to produce
other product such as sewing machines, and other electronic devices and equipment. I
joined in this company last January 02, 2013.
WORKING ACHIEVEMENTS:
IMPLEMENTED IMPROVEMENT COMPETITION OF SUPERVISORS AND
TECHNICIANS
MOST OUTSTANDING PRESENTER of 1st period of (4) four months
registered
From (April 2007-July 2007)…. given date (October 26, 2007).
MOST OUTSTANDING PRESENTER of 2ndperiod of (4) four months
registered
From (August 2007-November 2007)…. given date (February 22, 2008).
MOST OUTSTANDING PRESENTER of 1st period of (4) four months
registered
From (December 2007-March 2008)….given date (May 26, 2008).
2ndMOST OUTSTANDING PRESENTER of 2st period of (4) four
months registered
From (April 2008-July 2008)….given date (September 24, 2008).
3rd
MOST OUTSTANDING PRESENTER of 3rd period of (4) four months
registered
From (August 2008-November 2008)….given date (January 23, 2009).
MOST OUTSTANDING PRESENTER OF THE YEAR in one year registered
From (December 2007-November 2008)….given date (January 23, 2009).
EDUCATIONAL BACKGROUND:
COLLEGE : Bataan Heroes Memorial College
Balanga City, Bataan
1999-2004
Bachelor of Science in Mechanical Engineering
COURSE :
SECONDARY : Mariveles National High School – Cabcaben
Cabcaben, Mariveles, Bataan
1995-1999
ELEMENTARY : Cabcaben Elementary School
Cabcaben, Mariveles, Bataan
1989 – 1995
EMPLOYMENT HISTORY:
Company : Brother Industry (Philippines), Incorporated
Address : Lot 1-B-2 Phase 1B First Philippines Industrial
Park
Brgy.Ulango, Tanauan City, Batangas, Philippines
Inclusive Dates : January 02, 2013 – May 30, 2013
Position : Production Molding Jr. Supervisor
Mold Maintenance Section In-charge
Company : Mitsumi Philippines Incorporated
Address : AFAB Mariveles, Bataan, Philippines
Inclusive Dates : October 18, 2004 to July 26, 2012
Position : Production Molding Technician (2004-2006)
Mold Maintenance Technician (2006-2009)
Plastic Injection Molding Section In-Charge (2010-2012)
Company : Edison Bataan Co-Generation Corporation
Address : AFAB Mariveles, Bataan, Philippines
Inclusive Dates : May 2004 to October 2004
Position : Machine Shop Assistant
PERSONAL INFORMATION:
Age : 30 years old
Date of Birth : October 03, 1982
Nationality : Filipino
Civil Status : Married
Sex : Male
Height : 180.34 cm. / 5’11”
Weight : 194.04 lb. / 88 kg.
Languages Spoken : English, Tagalog and Nihongo
PERSONAL PROFILE:
Physically fit and extremely well presented, of good moral character and a person that is easy to
get along with. Respectfully towards all nationalities and cultures. Cordial, enthusiastic, punctual
and has a courteous tone and manner. Assertive, results oriented and can work under pressure.
Totally committed to customer satisfaction, which I am fully trained, and highly motivated
individual to maximize long -term profits and value to my superiors.
I hereby affirm that the above information is true and correct to the best of my knowledge
and that I have not withheld anything, which would affect my employment.
Contact this candidate