Maintenance Manufacturing
Resume:
Nick C. Heath
Allendale, Mi.
To whom it may concern.
I would like to thank you for taking the time to look
over my resume. It shows what I have done over the
years, and it is just some of what I can do while on
the job. I look forward in talking with you in
person, or over the telephone to discuss more in
detail, the many qualities that I’ve been trained in to
maintain the manufacturing of production running
smoothly. . I have a positive attitude and enjoy
working as team.
Sincerely,
NICK C. HEATH
Nick C. Heath
11779 Danton Dr.
Allendale, Mi. 49401
Objective:
Seeking a position in Machine Maintenance or
Manufacturing. Skilled, hardworking, positive employee.
Extensive manufacturing experience. Able to operate,
program, and repair robotic welders. Also have ran high
speed presses and maintained O.B.I’s. Significant
experience in employee supervision and trainings. Great at
multi-tasking and staying focused in a fast paced
environment. Have had numerous trainings, and look
forward to learning new things. Special Trainings include:
Fanuc RJ Series Training, EVA 201 Training, Taps Lean
Manufacturing, Applied Problem Solving (8-D) and
Statistical Process Control 1&2. Worked with pneumatic,
hydraulics, jig and fixture and have done touch screen
programming. Most recent training, ABB S4 Programming
I (US312).
Weld Tech Maintenance
Perform sensor checks to assure poke
yoke systems are working properly. Do
jig and fixture repair so production
keeps running smoothly, to meet
customers specs. Also do machine
change over for new parts to meet
customers schedules. Modify robotic
programs if needed, so welds meet
specs. Routine maintenance on robotic
welders, tips, liners, torches, change
wire, etc. I’m also certified to weld up .
5 inch steel in mig or pulse.
Walker, Mi.
12/11 / present
Medalist Laserfab Inc. Production
Oshkosh, WI.
01/09-12/10
Operated Panasonic robotic welders, changed fixtures as needed to follow
production schedule. Traced through programs to make sure nothing
changed and edit when needed. Performed welding, mig and pulse, ran
brake presses. Most of these parts ran for this company were built for
Military vehicles.
Self Employed
Small Engine Repair
Mesick, MI
Repair mowers, mopeds, and all kinds of
small
2006 2009
engines. Trouble shoot, clean and
rebuild carburetors and resurface parts.
Also have taken some temporary
construction positions with Manpower.
Tower Automotive Weld
Technician/Supervisor
Traverse City, MI
Started work as a production associate
and
10/91 12/05
progressed to a Supervisor responsible
for keeping forty welders, fifteen
assembly machines, and nine robotic
welders running on schedule. Operated,
programmed, and repaired Fanuc Arc
Mate 100 robotic welders. Followed
parts schedules, changed fixtures on
robots and did maintenance. This is the
company I learned to use the machines
to resurface and repair jig and fixtures.
General Motors Truck and
Utility Man/Assembler
Bus Group
As a Utility Man, covered all assembly
positions
Flint, MI
throughout the plant.
05/79 10/89
Additional information available upon
request.
Nick C. Heath
Allendale, Mi.
49401
To whom it may concern.
I would like to thank you for taking the time to look
over my resume. It shows what I have done over the
years, and it is just some of what I can do while on
the job. I look forward in talking with you in
person, or over the telephone to discuss more in
detail, the many qualities that I’ve been trained in to
maintain the manufacturing of production running
smoothly. . I have a positive attitude and enjoy
working as team.
Sincerely,
NICK C. HEATH
Nick C. Heath
11779 Danton Dr.
Allendale, Mi. 49401
Objective:
Seeking a position in Machine Maintenance or
Manufacturing. Skilled, hardworking, positive employee.
Extensive manufacturing experience. Able to operate,
program, and repair robotic welders. Also have ran high
speed presses and maintained O.B.I’s. Significant
experience in employee supervision and trainings. Great at
multi-tasking and staying focused in a fast paced
environment. Have had numerous trainings, and look
forward to learning new things. Special Trainings include:
Fanuc RJ Series Training, EVA 201 Training, Taps Lean
Manufacturing, Applied Problem Solving (8-D) and
Statistical Process Control 1&2. Worked with pneumatic,
hydraulics, jig and fixture and have done touch screen
programming. Most recent training, ABB S4 Programming
I (US312).
Weld Tech Maintenance
Perform sensor checks to assure poke
yoke systems are working properly. Do
jig and fixture repair so production
keeps running smoothly, to meet
customers specs. Also do machine
change over for new parts to meet
customers schedules. Modify robotic
programs if needed, so welds meet
specs. Routine maintenance on robotic
welders, tips, liners, torches, change
wire, etc. I’m also certified to weld up .
5 inch steel in mig or pulse.
Walker, Mi.
12/11 / present
Medalist Laserfab Inc. Production
Oshkosh, WI.
01/09-12/10
Operated Panasonic robotic welders, changed fixtures as needed to follow
production schedule. Traced through programs to make sure nothing
changed and edit when needed. Performed welding, mig and pulse, ran
brake presses. Most of these parts ran for this company were built for
Military vehicles.
Self Employed
Small Engine Repair
Mesick, MI
Repair mowers, mopeds, and all kinds of
small
2006 2009
engines. Trouble shoot, clean and
rebuild carburetors and resurface parts.
Also have taken some temporary
construction positions with Manpower.
Tower Automotive Weld
Technician/Supervisor
Traverse City, MI
Started work as a production associate
and
10/91 12/05
progressed to a Supervisor responsible
for keeping forty welders, fifteen
assembly machines, and nine robotic
welders running on schedule. Operated,
programmed, and repaired Fanuc Arc
Mate 100 robotic welders. Followed
parts schedules, changed fixtures on
robots and did maintenance. This is the
company I learned to use the machines
to resurface and repair jig and fixtures.
General Motors Truck and
Utility Man/Assembler
Bus Group
As a Utility Man, covered all assembly
positions
Flint, MI
throughout the plant.
05/79 10/89
Additional information available upon
request.
Nick C. Heath
Allendale, Mi.
49401
To whom it may concern.
I would like to thank you for taking the time to look
over my resume. It shows what I have done over the
years, and it is just some of what I can do while on
the job. I look forward in talking with you in
person, or over the telephone to discuss more in
detail, the many qualities that I’ve been trained in to
maintain the manufacturing of production running
smoothly. . I have a positive attitude and enjoy
working as team.
Sincerely,
NICK C. HEATH
Nick C. Heath
11779 Danton Dr.
Allendale, Mi. 49401
Objective:
Seeking a position in Machine Maintenance or
Manufacturing. Skilled, hardworking, positive employee.
Extensive manufacturing experience. Able to operate,
program, and repair robotic welders. Also have ran high
speed presses and maintained O.B.I’s. Significant
experience in employee supervision and trainings. Great at
multi-tasking and staying focused in a fast paced
environment. Have had numerous trainings, and look
forward to learning new things. Special Trainings include:
Fanuc RJ Series Training, EVA 201 Training, Taps Lean
Manufacturing, Applied Problem Solving (8-D) and
Statistical Process Control 1&2. Worked with pneumatic,
hydraulics, jig and fixture and have done touch screen
programming. Most recent training, ABB S4 Programming
I (US312).
Weld Tech Maintenance
Perform sensor checks to assure poke
yoke systems are working properly. Do
jig and fixture repair so production
keeps running smoothly, to meet
customers specs. Also do machine
change over for new parts to meet
customers schedules. Modify robotic
programs if needed, so welds meet
specs. Routine maintenance on robotic
welders, tips, liners, torches, change
wire, etc. I’m also certified to weld up .
5 inch steel in mig or pulse.
Walker, Mi.
12/11 / present
Medalist Laserfab Inc. Production
Oshkosh, WI.
01/09-12/10
Operated Panasonic robotic welders, changed fixtures as needed to follow
production schedule. Traced through programs to make sure nothing
changed and edit when needed. Performed welding, mig and pulse, ran
brake presses. Most of these parts ran for this company were built for
Military vehicles.
Self Employed
Small Engine Repair
Mesick, MI
Repair mowers, mopeds, and all kinds of
small
2006 2009
engines. Trouble shoot, clean and
rebuild carburetors and resurface parts.
Also have taken some temporary
construction positions with Manpower.
Tower Automotive Weld
Technician/Supervisor
Traverse City, MI
Started work as a production associate
and
10/91 12/05
progressed to a Supervisor responsible
for keeping forty welders, fifteen
assembly machines, and nine robotic
welders running on schedule. Operated,
programmed, and repaired Fanuc Arc
Mate 100 robotic welders. Followed
parts schedules, changed fixtures on
robots and did maintenance. This is the
company I learned to use the machines
to resurface and repair jig and fixtures.
General Motors Truck and
Utility Man/Assembler
Bus Group
As a Utility Man, covered all assembly
positions
Flint, MI
throughout the plant.
05/79 10/89
Additional information available upon
request.
Nick C. Heath
Allendale, Mi.
49401
To whom it may concern.
I would like to thank you for taking the time to look
over my resume. It shows what I have done over the
years, and it is just some of what I can do while on
the job. I look forward in talking with you in
person, or over the telephone to discuss more in
detail, the many qualities that I’ve been trained in to
maintain the manufacturing of production running
smoothly. . I have a positive attitude and enjoy
working as team.
Sincerely,
NICK C. HEATH
Nick C. Heath
11779 Danton Dr.
Allendale, Mi. 49401
Objective:
Seeking a position in Machine Maintenance or
Manufacturing. Skilled, hardworking, positive employee.
Extensive manufacturing experience. Able to operate,
program, and repair robotic welders. Also have ran high
speed presses and maintained O.B.I’s. Significant
experience in employee supervision and trainings. Great at
multi-tasking and staying focused in a fast paced
environment. Have had numerous trainings, and look
forward to learning new things. Special Trainings include:
Fanuc RJ Series Training, EVA 201 Training, Taps Lean
Manufacturing, Applied Problem Solving (8-D) and
Statistical Process Control 1&2. Worked with pneumatic,
hydraulics, jig and fixture and have done touch screen
programming. Most recent training, ABB S4 Programming
I (US312).
Weld Tech Maintenance
Perform sensor checks to assure poke
yoke systems are working properly. Do
jig and fixture repair so production
keeps running smoothly, to meet
customers specs. Also do machine
change over for new parts to meet
customers schedules. Modify robotic
programs if needed, so welds meet
specs. Routine maintenance on robotic
welders, tips, liners, torches, change
wire, etc. I’m also certified to weld up .
5 inch steel in mig or pulse.
Walker, Mi.
12/11 / present
Medalist Laserfab Inc. Production
Oshkosh, WI.
01/09-12/10
Operated Panasonic robotic welders, changed fixtures as needed to follow
production schedule. Traced through programs to make sure nothing
changed and edit when needed. Performed welding, mig and pulse, ran
brake presses. Most of these parts ran for this company were built for
Military vehicles.
Self Employed
Small Engine Repair
Mesick, MI
Repair mowers, mopeds, and all kinds of
small
2006 2009
engines. Trouble shoot, clean and
rebuild carburetors and resurface parts.
Also have taken some temporary
construction positions with Manpower.
Tower Automotive Weld
Technician/Supervisor
Traverse City, MI
Started work as a production associate
and
10/91 12/05
progressed to a Supervisor responsible
for keeping forty welders, fifteen
assembly machines, and nine robotic
welders running on schedule. Operated,
programmed, and repaired Fanuc Arc
Mate 100 robotic welders. Followed
parts schedules, changed fixtures on
robots and did maintenance. This is the
company I learned to use the machines
to resurface and repair jig and fixtures.
General Motors Truck and
Utility Man/Assembler
Bus Group
As a Utility Man, covered all assembly
positions
Flint, MI
throughout the plant.
05/79 10/89
Additional information available upon
request.
Nick C. Heath
Allendale, Mi.
49401
To whom it may concern.
I would like to thank you for taking the time to look
over my resume. It shows what I have done over the
years, and it is just some of what I can do while on
the job. I look forward in talking with you in
person, or over the telephone to discuss more in
detail, the many qualities that I’ve been trained in to
maintain the manufacturing of production running
smoothly. . I have a positive attitude and enjoy
working as team.
Sincerely,
NICK C. HEATH
Nick C. Heath
11779 Danton Dr.
Allendale, Mi. 49401
Objective:
Seeking a position in Machine Maintenance or
Manufacturing. Skilled, hardworking, positive employee.
Extensive manufacturing experience. Able to operate,
program, and repair robotic welders. Also have ran high
speed presses and maintained O.B.I’s. Significant
experience in employee supervision and trainings. Great at
multi-tasking and staying focused in a fast paced
environment. Have had numerous trainings, and look
forward to learning new things. Special Trainings include:
Fanuc RJ Series Training, EVA 201 Training, Taps Lean
Manufacturing, Applied Problem Solving (8-D) and
Statistical Process Control 1&2. Worked with pneumatic,
hydraulics, jig and fixture and have done touch screen
programming. Most recent training, ABB S4 Programming
I (US312).
Weld Tech Maintenance
Perform sensor checks to assure poke
yoke systems are working properly. Do
jig and fixture repair so production
keeps running smoothly, to meet
customers specs. Also do machine
change over for new parts to meet
customers schedules. Modify robotic
programs if needed, so welds meet
specs. Routine maintenance on robotic
welders, tips, liners, torches, change
wire, etc. I’m also certified to weld up .
5 inch steel in mig or pulse.
Walker, Mi.
12/11 / present
Medalist Laserfab Inc. Production
Oshkosh, WI.
01/09-12/10
Operated Panasonic robotic welders, changed fixtures as needed to follow
production schedule. Traced through programs to make sure nothing
changed and edit when needed. Performed welding, mig and pulse, ran
brake presses. Most of these parts ran for this company were built for
Military vehicles.
Self Employed
Small Engine Repair
Mesick, MI
Repair mowers, mopeds, and all kinds of
small
2006 2009
engines. Trouble shoot, clean and
rebuild carburetors and resurface parts.
Also have taken some temporary
construction positions with Manpower.
Tower Automotive Weld
Technician/Supervisor
Traverse City, MI
Started work as a production associate
and
10/91 12/05
progressed to a Supervisor responsible
for keeping forty welders, fifteen
assembly machines, and nine robotic
welders running on schedule. Operated,
programmed, and repaired Fanuc Arc
Mate 100 robotic welders. Followed
parts schedules, changed fixtures on
robots and did maintenance. This is the
company I learned to use the machines
to resurface and repair jig and fixtures.
General Motors Truck and
Utility Man/Assembler
Bus Group
As a Utility Man, covered all assembly
positions
Flint, MI
throughout the plant.
05/79 10/89
Additional information available upon
request.
Nick C. Heath
Allendale, Mi.
49401
To whom it may concern.
I would like to thank you for taking the time to look
over my resume. It shows what I have done over the
years, and it is just some of what I can do while on
the job. I look forward in talking with you in
person, or over the telephone to discuss more in
detail, the many qualities that I’ve been trained in to
maintain the manufacturing of production running
smoothly. . I have a positive attitude and enjoy
working as team.
Sincerely,
NICK C. HEATH
Nick C. Heath
11779 Danton Dr.
Allendale, Mi. 49401
Objective:
Seeking a position in Machine Maintenance or
Manufacturing. Skilled, hardworking, positive employee.
Extensive manufacturing experience. Able to operate,
program, and repair robotic welders. Also have ran high
speed presses and maintained O.B.I’s. Significant
experience in employee supervision and trainings. Great at
multi-tasking and staying focused in a fast paced
environment. Have had numerous trainings, and look
forward to learning new things. Special Trainings include:
Fanuc RJ Series Training, EVA 201 Training, Taps Lean
Manufacturing, Applied Problem Solving (8-D) and
Statistical Process Control 1&2. Worked with pneumatic,
hydraulics, jig and fixture and have done touch screen
programming. Most recent training, ABB S4 Programming
I (US312).
Weld Tech Maintenance
Perform sensor checks to assure poke
yoke systems are working properly. Do
jig and fixture repair so production
keeps running smoothly, to meet
customers specs. Also do machine
change over for new parts to meet
customers schedules. Modify robotic
programs if needed, so welds meet
specs. Routine maintenance on robotic
welders, tips, liners, torches, change
wire, etc. I’m also certified to weld up .
5 inch steel in mig or pulse.
Walker, Mi.
12/11 / present
Medalist Laserfab Inc. Production
Oshkosh, WI.
01/09-12/10
Operated Panasonic robotic welders, changed fixtures as needed to follow
production schedule. Traced through programs to make sure nothing
changed and edit when needed. Performed welding, mig and pulse, ran
brake presses. Most of these parts ran for this company were built for
Military vehicles.
Self Employed
Small Engine Repair
Mesick, MI
Repair mowers, mopeds, and all kinds of
small
2006 2009
engines. Trouble shoot, clean and
rebuild carburetors and resurface parts.
Also have taken some temporary
construction positions with Manpower.
Tower Automotive Weld
Technician/Supervisor
Traverse City, MI
Started work as a production associate
and
10/91 12/05
progressed to a Supervisor responsible
for keeping forty welders, fifteen
assembly machines, and nine robotic
welders running on schedule. Operated,
programmed, and repaired Fanuc Arc
Mate 100 robotic welders. Followed
parts schedules, changed fixtures on
robots and did maintenance. This is the
company I learned to use the machines
to resurface and repair jig and fixtures.
General Motors Truck and
Utility Man/Assembler
Bus Group
As a Utility Man, covered all assembly
positions
Flint, MI
throughout the plant.
05/79 10/89
Additional information available upon
request.
Nick C. Heath
Allendale, Mi.
49401
To whom it may concern.
I would like to thank you for taking the time to look
over my resume. It shows what I have done over the
years, and it is just some of what I can do while on
the job. I look forward in talking with you in
person, or over the telephone to discuss more in
detail, the many qualities that I’ve been trained in to
maintain the manufacturing of production running
smoothly. . I have a positive attitude and enjoy
working as team.
Sincerely,
NICK C. HEATH
Nick C. Heath
11779 Danton Dr.
Allendale, Mi. 49401
Objective:
Seeking a position in Machine Maintenance or
Manufacturing. Skilled, hardworking, positive employee.
Extensive manufacturing experience. Able to operate,
program, and repair robotic welders. Also have ran high
speed presses and maintained O.B.I’s. Significant
experience in employee supervision and trainings. Great at
multi-tasking and staying focused in a fast paced
environment. Have had numerous trainings, and look
forward to learning new things. Special Trainings include:
Fanuc RJ Series Training, EVA 201 Training, Taps Lean
Manufacturing, Applied Problem Solving (8-D) and
Statistical Process Control 1&2. Worked with pneumatic,
hydraulics, jig and fixture and have done touch screen
programming. Most recent training, ABB S4 Programming
I (US312).
Weld Tech Maintenance
Perform sensor checks to assure poke
yoke systems are working properly. Do
jig and fixture repair so production
keeps running smoothly, to meet
customers specs. Also do machine
change over for new parts to meet
customers schedules. Modify robotic
programs if needed, so welds meet
specs. Routine maintenance on robotic
welders, tips, liners, torches, change
wire, etc. I’m also certified to weld up .
5 inch steel in mig or pulse.
Walker, Mi.
12/11 / present
Medalist Laserfab Inc. Production
Oshkosh, WI.
01/09-12/10
Operated Panasonic robotic welders, changed fixtures as needed to follow
production schedule. Traced through programs to make sure nothing
changed and edit when needed. Performed welding, mig and pulse, ran
brake presses. Most of these parts ran for this company were built for
Military vehicles.
Self Employed
Small Engine Repair
Mesick, MI
Repair mowers, mopeds, and all kinds of
small
2006 2009
engines. Trouble shoot, clean and
rebuild carburetors and resurface parts.
Also have taken some temporary
construction positions with Manpower.
Tower Automotive Weld
Technician/Supervisor
Traverse City, MI
Started work as a production associate
and
10/91 12/05
progressed to a Supervisor responsible
for keeping forty welders, fifteen
assembly machines, and nine robotic
welders running on schedule. Operated,
programmed, and repaired Fanuc Arc
Mate 100 robotic welders. Followed
parts schedules, changed fixtures on
robots and did maintenance. This is the
company I learned to use the machines
to resurface and repair jig and fixtures.
General Motors Truck and
Utility Man/Assembler
Bus Group
As a Utility Man, covered all assembly
positions
Flint, MI
throughout the plant.
05/79 10/89
Additional information available upon
request.
Nick C. Heath
Allendale, Mi.
49401
To whom it may concern.
I would like to thank you for taking the time to look
over my resume. It shows what I have done over the
years, and it is just some of what I can do while on
the job. I look forward in talking with you in
person, or over the telephone to discuss more in
detail, the many qualities that I’ve been trained in to
maintain the manufacturing of production running
smoothly. . I have a positive attitude and enjoy
working as team.
Sincerely,
NICK C. HEATH
Nick C. Heath
11779 Danton Dr.
Allendale, Mi. 49401
Objective:
Seeking a position in Machine Maintenance or
Manufacturing. Skilled, hardworking, positive employee.
Extensive manufacturing experience. Able to operate,
program, and repair robotic welders. Also have ran high
speed presses and maintained O.B.I’s. Significant
experience in employee supervision and trainings. Great at
multi-tasking and staying focused in a fast paced
environment. Have had numerous trainings, and look
forward to learning new things. Special Trainings include:
Fanuc RJ Series Training, EVA 201 Training, Taps Lean
Manufacturing, Applied Problem Solving (8-D) and
Statistical Process Control 1&2. Worked with pneumatic,
hydraulics, jig and fixture and have done touch screen
programming. Most recent training, ABB S4 Programming
I (US312).
Weld Tech Maintenance
Perform sensor checks to assure poke
yoke systems are working properly. Do
jig and fixture repair so production
keeps running smoothly, to meet
customers specs. Also do machine
change over for new parts to meet
customers schedules. Modify robotic
programs if needed, so welds meet
specs. Routine maintenance on robotic
welders, tips, liners, torches, change
wire, etc. I’m also certified to weld up .
5 inch steel in mig or pulse.
Walker, Mi.
12/11 / present
Medalist Laserfab Inc. Production
Oshkosh, WI.
01/09-12/10
Operated Panasonic robotic welders, changed fixtures as needed to follow
production schedule. Traced through programs to make sure nothing
changed and edit when needed. Performed welding, mig and pulse, ran
brake presses. Most of these parts ran for this company were built for
Military vehicles.
Self Employed
Small Engine Repair
Mesick, MI
Repair mowers, mopeds, and all kinds of
small
2006 2009
engines. Trouble shoot, clean and
rebuild carburetors and resurface parts.
Also have taken some temporary
construction positions with Manpower.
Tower Automotive Weld
Technician/Supervisor
Traverse City, MI
Started work as a production associate
and
10/91 12/05
progressed to a Supervisor responsible
for keeping forty welders, fifteen
assembly machines, and nine robotic
welders running on schedule. Operated,
programmed, and repaired Fanuc Arc
Mate 100 robotic welders. Followed
parts schedules, changed fixtures on
robots and did maintenance. This is the
company I learned to use the machines
to resurface and repair jig and fixtures.
General Motors Truck and
Utility Man/Assembler
Bus Group
As a Utility Man, covered all assembly
positions
Flint, MI
throughout the plant.
05/79 10/89
Additional information available upon
request.
Nick C. Heath
Allendale, Mi.
49401
To whom it may concern.
I would like to thank you for taking the time to look
over my resume. It shows what I have done over the
years, and it is just some of what I can do while on
the job. I look forward in talking with you in
person, or over the telephone to discuss more in
detail, the many qualities that I’ve been trained in to
maintain the manufacturing of production running
smoothly. . I have a positive attitude and enjoy
working as team.
Sincerely,
NICK C. HEATH
Nick C. Heath
11779 Danton Dr.
Allendale, Mi. 49401
Objective:
Seeking a position in Machine Maintenance or
Manufacturing. Skilled, hardworking, positive employee.
Extensive manufacturing experience. Able to operate,
program, and repair robotic welders. Also have ran high
speed presses and maintained O.B.I’s. Significant
experience in employee supervision and trainings. Great at
multi-tasking and staying focused in a fast paced
environment. Have had numerous trainings, and look
forward to learning new things. Special Trainings include:
Fanuc RJ Series Training, EVA 201 Training, Taps Lean
Manufacturing, Applied Problem Solving (8-D) and
Statistical Process Control 1&2. Worked with pneumatic,
hydraulics, jig and fixture and have done touch screen
programming. Most recent training, ABB S4 Programming
I (US312).
Weld Tech Maintenance
Perform sensor checks to assure poke
yoke systems are working properly. Do
jig and fixture repair so production
keeps running smoothly, to meet
customers specs. Also do machine
change over for new parts to meet
customers schedules. Modify robotic
programs if needed, so welds meet
specs. Routine maintenance on robotic
welders, tips, liners, torches, change
wire, etc. I’m also certified to weld up .
5 inch steel in mig or pulse.
Walker, Mi.
12/11 / present
Medalist Laserfab Inc. Production
Oshkosh, WI.
01/09-12/10
Operated Panasonic robotic welders, changed fixtures as needed to follow
production schedule. Traced through programs to make sure nothing
changed and edit when needed. Performed welding, mig and pulse, ran
brake presses. Most of these parts ran for this company were built for
Military vehicles.
Self Employed
Small Engine Repair
Mesick, MI
Repair mowers, mopeds, and all kinds of
small
2006 2009
engines. Trouble shoot, clean and
rebuild carburetors and resurface parts.
Also have taken some temporary
construction positions with Manpower.
Tower Automotive Weld
Technician/Supervisor
Traverse City, MI
Started work as a production associate
and
10/91 12/05
progressed to a Supervisor responsible
for keeping forty welders, fifteen
assembly machines, and nine robotic
welders running on schedule. Operated,
programmed, and repaired Fanuc Arc
Mate 100 robotic welders. Followed
parts schedules, changed fixtures on
robots and did maintenance. This is the
company I learned to use the machines
to resurface and repair jig and fixtures.
General Motors Truck and
Utility Man/Assembler
Bus Group
As a Utility Man, covered all assembly
positions
Flint, MI
throughout the plant.
05/79 10/89
Additional information available upon
request.
Nick C. Heath
Allendale, Mi.
49401
To whom it may concern.
I would like to thank you for taking the time to look
over my resume. It shows what I have done over the
years, and it is just some of what I can do while on
the job. I look forward in talking with you in
person, or over the telephone to discuss more in
detail, the many qualities that I’ve been trained in to
maintain the manufacturing of production running
smoothly. . I have a positive attitude and enjoy
working as team.
Sincerely,
NICK C. HEATH
Nick C. Heath
11779 Danton Dr.
Allendale, Mi. 49401
Objective:
Seeking a position in Machine Maintenance or
Manufacturing. Skilled, hardworking, positive employee.
Extensive
Contact this candidate