E&IC Engineer

NOEL C. MADOLID

Contact No: +639*********; +821*********

E-mail Address: ***********@*****.***

Position Applied: Senior Instrument and Controls Engineer

QA/QC-Construction/Project Management/

Maintenance (Onshore/Offshore)

Qualification:

More than 22 years total experience on combined field in construction,

inspection, engineering project management, commissioning and maintenance

of instrumentation and control on gas and oil production facilities,

power, petrochemical and refinery plants. Has an extensive knowledge in

DCS, PLC/SCADA, Fire & Gas, ESD and telecommunication system. Proficient to

read drawings, interpret P&I D's work instructions, vendor documentations,

codes and specifications. . Knowledge of instrumentation and control

design, evaluation, implementation, contracts negotiations on conducting

the projects definition and execution subject to budget, schedule and

quality through the various phases of front end engineering, detailed

design, construction, commissioning and start-up.

June 2013- Present

Ras Gas Company Limited Qatar

PMT- Instrument, Control and Telecom Engineer

Barzan Offshore Facilities Project Korea/Qatar

Support and manage all aspects of the instrumentation, controls, and

telecommunications engineering scope of work for the Barzan Offshore PMT, 3

Wellhead Platforms and LQ. Conduct technical review and provide resolutions

in EPC engineering deliverables. Support during completions, hook-up and

commissioning offshore. Coordinates the final engineering aspects of the

project activities within discipline to ensure that safety, operability,

maintainability, reliability and other technical objectives are fully met,

within approved project scope, budget and schedule. Monitors Contractor's

performance within discipline, providing advice to make certain Company's

control system design goal, philosophy and specifications are met.

Participate in vendor's acceptance test. Provide timely review of

Contractor's design. Assist the Systems Completions Engineer with design

input/assistance during the Mechanical Completion phase. Provide start-up

and commissioning support for the offshore facilities.

Oct 2010 to Jan 2013

Company: Worley Parsons International Limited Abu Dhabi

Client: Takreer Abu Dhabi Oil Refining Company

Project: Green Diesel Project construction including revamp in existing

refinery

Position: Senior Instrument and Control Engineer (PMC)

Provide technical input and support to the review of EPC deliverables as

required under the Contract for Instrumentation discipline and ensure all

documents comply with the Project requirements during FEED and detailed

design phase.. Oversee the EPC Contractor during execution of

instrumentation field construction activities in conformance to approved

project drawings, specifications and standards. Coordinate interfaces with

other parts of the project for instrumentation, ICSS tie-ins, F&G and

Telecommunications. Carried out witnessing pre-commissioning activities;

punch listing, walkthrough, loop check, functional testing, site acceptance

testing, review and approval of engineering queries/ design change request

leading to mechanical completion. Provide support in commissioning, start-

up until provisional acceptance. Ensure Project safety standards are met or

exceeded.

Nov 2008 to Sept 2010

Company: Worley Parsons International Limited Abu Dhabi

Client: Abu Dhabi Gas Liquefaction Company (ADGAS)

Project: Offshore Associated Gases Project Package 1

Position: Senior Instrument and Control Engineer (PMC)

Involve in engineering during FEED and detailed reviewing and EPC

deliverables. Responsible for the review, monitoring and approval of EPC

contractors supplied instrument, telecom equipment, materials, loop/ test

packages, commissioning activities, approved detailed design

documents/drawings for accuracy and completeness of project procedures in

compliance with company and industry standards. Carried out monitoring and

surveillance on installation of process instrumentation and control systems

of Honeywell DCS Experion,Triconex TMR,QMR,ESD system, Bentley Nevada

machine monitoring CCC anti surge controller/Trainview, GE Speedtronics

Mark V1 TMR including CCTV,Telecom System (Radio, Telephone and LAN).

Witness/ inspect, sign-off, calibration, functional testing, loop checking

and site acceptance testing. Ensure contractors compliance with company

quality plan and HSE standards.

Feb 2008 to Sept 2008

Company: NRG Engineering Consultancy Singapore-supplied to Technip Project

Consortium Vietnam

Dung Quat Oil and Gas Refinery Construction- Vietnam

Position: Instrumentation Supervisor

Involve in the integrated instrumentation team during pre-commissioning

activities. Perform pre-commissioning test and checks and solved problems

on instrumentation prior to mechanical completion. Supervised loop checking

and verify conformance as per established procedure and required quality

level on installation of field instrumentation and control systems

including F&G, DCS, ESD/ and telecommunications.

Oct 2007 to Jan 2008

Company: Petroleum Development Oman

Marmul Full field Development and Oil Enhance Recovery

projects

Position: Instrument Engineer

Single point responsible for the day to day supervision of contractors on

construction of brown field projects in the assigned area, applying Project

Quality Plans and HSE standards. Verify constructability in construction

packages and liaison with project engineer. Conduct progress monitoring and

reporting. Liaison with other discipline supervisors and operations

department to ensure work targets is met. Identify all construction and

material problems and highlight to Engineering Team Leader. Liaise with

technical authorities on standards and deviations. Checking of as-built

drawings and test packs. Manage all HSE aspects of the work. Contribute to

the identification and implementation of cost reduction in design and

construction. Ensure strict compliance of the contractor with HSE

standards. Oversee commissioning in coordination with TPI, contractors and

vendors (Honeywell, Invensys, Emerson, etc).

Aug 2006 to Aug 2007

Company: AMEC Services Limited Philippines

PHC/ Supplied to Shell Philippines Exploration Malampaya

Gas Exploration and Production.

Position: Instrument implementation Engineer

Provide Technical support to the offshore asset in relation to all

instrumentation problems and issues. Ensure the progress and timely

completion of those activities in line with the integrated asset plan.

Provide discipline related technical support to operations and maintenance

departments to identify deficiencies recommend and implement long term

solutions. Provide technical assistance to the purchasing department and

identifies spares/equipment orders. Liaises with operation and maintenance

group and ensures for the asset operational safety and reliability in terms

of design, standardization & maintainability. Ensure its compliance with

company engineering standards and specifications. Review, develop and

tender documents and procedures for new and in-house projects. Generate

instrumentation workpack. Coordinate during commissioning and start-up of

implemented projects (System used- Delta V).

July 2005 to Jun 2006

Company: Worley Parsons International Limited-Abu Dhabi

Project: Bu Hasa O&G Facility Development Project-Abu Dhabi Company for

Onshore Oil Operations (ADCO)

Position: Instrument Inspector (PMC)

Assign as client representative in a project management team. Provide

company representation in monitoring and coordinating the site activities

to ensure that the contractors fulfill their obligations under the contract

and is fully cognizant of the scope, codes/standard and specification

requirements of the project. Engage in construction of new central

degassing station and upgrading of existing gas/ water injection facilities

in Bu Hasa field. Carried out monitoring and surveillance on installation

of process instrumentation and control systems including ESD, F&G, RTU/PLC-

SCADA telemetering and telecommunications. Witness/ inspect, sign-off,

calibration, testing and loop checking. Ensure contractors compliance with

company quality plan and HSE standards.

Mar 2004 to Jun 2005

Company: McDermott Caspian Contractor Inc Azerbaijan

Project: British Petroleum Central Azeri-PDQ Platform Baku, Azerbaijan

Position: Instrument Engineer (Commissioning)

Involve in Azeri International Operating Company CA-PDQ Platform

construction project as part of integrated commissioning team. Engage in

the pre commissioning and commissioning of system and sub-system in the

process instrumentation Fire/Gas and ESD in top side facilities. Prepare

and request of common tools and materials for pre commissioning works.

Preparation and compilation of check sheets per check sheets overview.

Review instrument index, loop drawings, installation checklist, progress

report, calibration records and other documents and insure they are

updated. Monitor red lined drawings of any changes made and update as-built

drawings. Assist in the compilation of final documentation. Coordinate with

client for hand over of all accomplished works.

Aug 2003 to Jan 2004

Company: SGS-Philippines

Client: UNOCAL Philippines

Project: PGI- Makban Steam Field Instrumentation Upgrade Project

Position: Construction Engineer-Instrumentation (Project Management

Construction)

Assign as a work package manager to engineering and construction project

management team. Responsible in engineering and implementation works for

steam surface facility instrumentation upgrade project. Preparation of bid

documents issue to prospective bidders. Carry out selection of potential

contractor for project execution. Perform in-house design, materials take

off, cost and estimate of pre-issue materials. Prepare necessary

instruments and bulk materials not in the contractor scope of supply.

Review vendor's quotation and coordinate with the procurement. Review and

evaluate contractor's design, P&ID, data sheets, instrument index and other

documents prior to construction. Monitoring and provide quality control

during construction field works. Monitor progress, quality and schedule of

work activities. Monitoring and adhering to HSE compliance. Participate in

pre-commissioning and commissioning activities.

Jan 2003 to Jul 2003

Company: PTSC-J. Ray McDermott Alliance-Vung Tau, Vietnam

Project: Japan Vietnam Petroleum Company Rang Dong Field Development

/Utility and LQ Platform

Position: Electrical/Instrumentation Inspector

Monitoring and control the on site electrical and instrumentation

installation and testing relative to the Utility and Living Quarter

platform modules. Ensure compliance with the contract requirement relative

to design implementation, specification, schedule, quality, and HSE. Engage

as a part of company project team during construction and pre commissioning

of the LQNU project. Ensuring the electrical and instrumentation

construction work is carried out in accordance with the contract

requirements company standard, code and quality. Monitor the

implementation of the approved quality plan. Verify that all inspections

are carried out by qualified personnel and that the records are maintained.

Verify the suitability and acceptance of all electrical and

instrumentation materials. Ensure that competent and certified tradesmen

are used to carry out the electrical and instrumentation work. Monitoring

the sub-contractor testing activities to ensure the compliance with the

agreed testing procedures and test certificates.

Mar 2002 to Dec 2002

Company: OIS/British Petroleum-Vietnam

Project; BP Nam Con Son Gas Facility Project -Dinh Co Terminal Vung Tau,

Vietnam

Position: Electrical/Instrumentation Inspector (Construction)

Client representative to oversee EPC contractor execution works is in

compliance to project contracts. Responsible for adherence to

specification and code requirement for instrumentation works. Knowing and

ensuring contractor conformance with safety standard. Check adherence to

approved procedure. Verify installation is in accordance with relevant IFC,

specification and drawings. Provide technical assistance in punch listing

and corrective actions in field construction. Monitor work progress in

continuing basis. Sign off QC/ITP cheek sheets prior to commissioning. Site

surveillance activity planned, monitored and controlled.

Sept 2001 to Jan 2002

Company: Supply Oilfield Services Inc. assigned to Expro Northsea Group

Manila

Client: Shell SPEX Philippines- Malampaya Oil Rim EWT-Atwood Falcon

Drilling Rig Topsides Facilities

Position: Instrument Specialist (Commissioning/Maintenance)

Supplied to EXPRO Group, a service contractor involved in hook-up

commissioning, start-up, testing, operation and maintenance of

instrumentation monitoring and controls in drilling rig topsides facility.

Perform calibration of pneumatic, electronic transmitters and switches.

Check operation and adjustment of controllers and control valves.

Inspection, loop testing and function checking of field instruments to

control room. Coordinate with other service contractors in testing of Fire

and Gas, H2S detection system, PSD/ESD and data acquisition system. Perform

crude oil Reid vapor pressure testing. Provide technical support and

assistance to operations and perform maintenance during testing and

production period.

Jun 1999 to Jun 2001

Company: SGS Philippines

Client: Philippine Geothermal Inc. a UNOCAL Subsidiary

Position: Contractor Monitoring Specialist (E&I Engineer) Project

Management/Construction

Perform electrical and Instrumentation works-installation, configuration,

inspection, commissioning and start-up. Systems used; Delta V, Allen

Bradley PLC, ABB 505 Commander and MIRI telemetering system. Monitor and

insure consistent application in engineering standard, codes, construction

procedure, project tracking, quality control, and implementation, provision

of loss control policy and safety compliance. Monitor implementation of the

construction phase in all discipline with following scope of works: Conduct

the orientation, pre construction meeting and site inspection. Monitor

compliance to standard, code, quality, construction drawing and

specifications. Evaluate contractor progress billing, performance and

project turn over. Participate in pre-commissioning; Compile all necessary

contract close-out documents in preparation for turn over to project

owner/client.

Jun 1995 to May 1999

Company: Primo Oleo chemicals Inc. Philippines

Position: Instrumentation Superintendent (Construction/ Maintenance)

First Phase of employment- Supervise engineering and construction

activities of instrumentation works at field and in control room-including

configuration, FAT, SAT and installation of Honeywell TDC 3000 and PLC

systems. Second phase involves in the maintenance of instrumentation and

control system throughout the refinery plant. Responsible in overseeing

engineering works, construction/installation, commissioning and start-up

activities related to instrumentation and control system. Second Phase as

an Instrument Superintendent: (Maintenance)

Responsible for the supervision, planning and leading to all activities and

functions involved in the maintenance of instrumentation and control

Honeywell TDC 3000 system in the oleo chemical areas such as Fatty Acid,

Fatty Alcohol plants, utilities, i.e., boilers, compressors and water

treatment.

Jun 1994 to Apr 1995

Company: DCCD Engineering Philippines (Design Consulting & Construction

Development)

Position: Senior Instrument Engineer (Construction, Management,

Supervision)

Project: Philippine National. Oil Company Leyte Geothermal -Fluid

Collection and Disposal System

Assign a client representative in the project management team to oversee

construction, inspection, quality control, testing, pre com and

commissioning. Review and evaluate engineering design submitted by design

contractor. Make a comments/recommendation and approval prior to

implementation. Monitoring contractor activities in the installation of

process- out- station system (GE Fanuc PLC). Monitoring quality,

reliability and in conformance to specifications, codes and established

quality standard.

Dec 1993 to May 1994

Company: Overseas Technical Services

Client: Canadian Occidental Petroleum, Ltd. Aden, Yemen

Position: Instrument Technician (Maintenance)

Duties engage in maintenance of instrumentation and control system in

central oil production facilities Carry out maintenance on instrumentation

of central power plant, Wartsila diesel engine generators (6x5 MW) using

Woodward control system, Modicon and GE-Fanuc PLC automation system.

Maintenance of PLC GE Fanuc control system. Maintain SCADA and PLC on

central control room, field and well sites. Maintenance 40-Baker 6500

remote terminal units, Varec tank gauging and Net Oil computers micro

motion in all surrounding well sites.

Apr 1992 to June 1993

Company: Zueitina Oil Libya Fidah 74-A Concession Gas and production

Facilities

Position: Instrument Foreman (Maintenance)

Engage in the maintenance of field and control room instrumentation system.

Carried out routine maintenance, repair, overhaul,calibration and

troubleshooting of a wide range of pneumatic, hydraulic, electrical and

electronic instrumentation system in workshop and on-site.. Performs

maintenance of power generation instrumentation and controls (4x2.5 MW

Solar Centaur Gas Turbine Generator). Control room systems used: Automate

and Allen Bradley Programmable Logic Controller. Responsible for training

local technicians and craftsman.

May 1988 to Jan 1992

Company: Nippon Steel Construction Company Kalimantan, Indonesia

Position: Instrument Engineer (Engineering/Construction)

Responsible in the engineering and construction of electrical and

instrumentation works for the expansion of gas production facility various

project Review and evaluate vendor's data/quotation and coordinate with

purchasing. Review calculation and drawing and define inspection and

testing requirements by sub-contractors. Prepare materials take-off and

estimates for bidding purposes. Supervise construction /installation works

concerning electrical and instrumentation. Prepare pre- com procedures and

functional testing. Carried-out fault finding, calibration and resolved

problems encountered. Prepare correspondence, records, certificates,

reports on inspection and testing.

Jun 1986 to Jun 1987

Company: Electricity Corporation Hail, Saudi Arabia

Position: Instrument and Control Engineer (Maintenance)

Engage in the maintenance of power plant instrumentation system. Carry-out

repair, troubleshooting, testing, installation post maintenance and

safeguard testing. Emphasis is on integrated control system of 5x100 Mw

Westinghouse gas turbine units using Woodward control Troubleshooting,

calibration, repair and adjustments of governor control system.

Feb 1983 to Apr 1985

Company: Arabian American Oil Company Ras Tanura, Saudi Arabia

Position: Instrument Technician (Maintenance)

Direct employee-Carry-out routine maintenance; breakdown repair,

calibration, troubleshooting on various types of field instrumentation and

control system for flow, level, pressure and temperature variables. Perform

repair of electronic cards and control room instruments. Suggest and

recommend modification and improvement in instrumentation and control

system. Provide assistance for the procurement of instrument spare parts

and equipment.

Feb 1979 to Nov 1982

Position: Instrument Engineer (Maintenance)

Company: National Power Corporation Rockwell Thermal Plant City,

Philippines

Started as an electronic-mechanic, rose to technician then to instrument

engineer level (started as a working student). Involve in the maintenance

of instrumentation and control on steam turbine power plant (G.E. 6x25MW &

3x60 MW).

Education: B.S. Electronics and Communications Engineering-1981/

FEATI University Manila, Philippines

Registered Electronics & Communications Engineer of

the Philippines

In-Service Seminar/Training Attended:

Honeywell Total Distributed Control System-TDC3000

Honeywell Training Center, Singapore

Modules (5): (Advance Process Manager Maintenance,

LCM Maintenance, APM/CL Maintenance and

Universal Station Implementation)

Programmable Logic Controller and Basic Robotics

University of the Philippines (UPISSI)

Instrumentation and Process Control

University of the Philippines (UPISSI)

Pneumatics and Electro-pneumatics Control

University of the Philippines (UPISSI)

Digital Electronics-Microprocessor based system

Manpower Training Center Manila, Phil.

Water Survival Training course

Arabian American Oil (ARAMCO KSA)

H2S Safety Training

Rutledge, Singapore 2002

Petroleum Development Oman,

Basic Onshore/Offshore Safety Induction

Atwood Falcon Drilling Rig

Helicopter Escape Underwater Breathing system-

Intl. Development &Environmental Training

(IDESS) Subic Bay, Philippines

Offshore Safety Induction and Emergency Training

Intl. Development & Environmental Training

(IDESS) Subic Bay, Philippines

Permit to Work System

Azeri Intl Operating Co. Azerbaijan

Shell SPEX

HSE Training

Petroleum Development Oman

Organization/Membership

Philippine Instrumentation and Control Society (PICS)

Institute of Electronics and Communications Engineer of the

Philippines (IECEP)

Computer literate: Microsoft Office-Word and Excel

Proficient in English Language, written and spoken

Contact this candidate