**** ****** ***** *** . ****** Acres, FL*****
Phone 239-***-**** . E-mail ab8ws8@r.postjobfree.com
PHILIP PHAN
Education
**** - **** ********** ** **********
Seattle, Washington
Master Degree in Business Administration (Technology
Management MBA)
1984 - 1986 University of Minnesota Minneapolis,
Minnesota
Bachelor of Science in Electrical Engineering (BSEE)
1982 - 1984 Northwestern Electronic College
Columbia Height, MN.
Associate Degree in Industrial/Computer Electronics
Technology (AA)
Certification: Six Sigma - Green Belt from General
Electric company in 2003
Professional experience
18 years experiences in Business, Technology and
Manufacturing management that includes instrument
system designs and troubleshooting. Total of 21 years
experiences in Electronic Instrument Manufacturing.
6/2006-Present ( 6 years) Self-employment, Naples
Florida
General Manager
Providing high level business consultation for
Daithanh Corp. the overseas parent company managing a
chain of Electronics/Consumer Goods superstores
nationwide. The highlight of the project was cutting
the overall expenses to 36% in the first year to
generate a respectable profit level and laying out
the strong foundation for greater business management
as the followings:
Developed highly sounded business plans with
innovative concepts and business practices utilizing
Six Sigma DMAIC.
Built multi-levels management teams and operating
systems with check & balance concept.
Initiated the ERP systems (SQL database w/ Visual
Basic software interface) with embedded process
controlling and generating crucial business data for
improvement analytical purposes.
Leading Purchasing department with Material
procurement controls to support Just-in-time (JIT)
and Lean Manufacturing concepts.
Implemented ISO-9000 for Quality Controls and
utilized Six Sigma for business developments and
process improvements.
Continuously, tightening up the process controls to
minimize the product and service defects in-turn
effectively increasing customer satisfaction level
with J.I.T and Lean MFG system controls.
Adhering to the Profit & Loss plans
(Monthly/Annually) to drive the business (Growth) and
controlling all of the expenses accordingly.
Global business operating and managing diverse
employees.
9/1995-6/2006 (11 years) Olympus-NDT - Waltham,
Massachusetts
With various positions as the followings:
Instrument Manufacturing Manager/ Project Manager
position:
As an Instrument Manufacturing Manager, I provided
the management for Manufacturing division that
producing Ultrasonic Flaw Detectors,
Thickness/Corrosion Gages, Magna-Mikes (Hall Effect
gages) and Scientific Ultrasonic Instrumentations for
Universities and Research Centers worldwide. My
responsibility included:
Managing many Manufacturing departments such as
Electronics/Mechanical Engineering, Board/Module and
Instrument Testing, Electronic/Mechanical Assembling,
and Quality Control.
Worked with multi-nations suppliers to provide
technical supports for all processing levels from
Multi-layers PCB fabrications to populating super
high density Surface Mount (SMT) and Ball Grid Arrays
(BGA's) components Printing Circuit Assemblies
(PCA's). Applying quality control inspections on
these PCA's using IPC and Military Standards.
Writing and administrated the ECO's (Engineering
Change Order)
Initiated and Setting for the ERP system with process
flows and multi-levels auto reporting systems.
Implementing ISO-9000 for Quality Control,
Just-In-Time (JIT) for great Material and Process
Controls (Lean Manufacturing) concepts and Six Sigma
for greater operating controls and minimizing product
and Process defects.
Managing and providing technical support to the Field
Return Service Department with Instrument NIST
calibrations and Repairs.
Global business operating and managing diverse
employees.
As a Project Manager: my responsibility included
Oversaw company's Ultrasonic Instrument designs with
Software and Hardware design concepts (using Intel
DSP and Motorola 68000 series for microprocessor
cores).
Writing project roadmap with design timelines and
project milestones using New Product Development
(NPD) method.
Controlled the progress of software, hardware and
mechanical development against the NPD milestones.
Performed many project reviews using original project
definitions
Releasing projects to Manufacturing for mass
productions.
Provided technical supports after the products
released to Manufacturing.
2002-2004 (2 years) same company under General
Electric (GE) management, Waltham, Massachusetts
Ultrasonic Instrumentation Laboratory Manager/
Product Engineer Position
Revised the major project (Flaw Detector model
Epoch3) with previously high return rate (almost
100%) to .2% with performing the Operating Software
(O/S) analytical works down to routine and command
levels; For hardware, analyzing the Field
Programmable Gate Arrays (FPGA's) down to gate level
to rewriting the processing flow and the Logic
controls for the O/S.
I was the first one in the world successfully
developed signal processing and the operating
software concepts that made possible to produce the
first functioning Ultrasonic Digital Flaw Detector.
Managing Test Engineering group and the Field Return
group with technical support, resource planning and
general laboratory management tasks.
Performing technical evaluation for all Ultrasonic
instruments Manufacturing releasing with
electronic/mechanical design review, approving
assembly procedures, test procedures and
electronic/mechanical part selections.
Setup, technical supporting and production managing
multiple board houses (Printing circuit board
assembly manufacturing's) within the US and overseas.
1995-2002 (7 years) same company under Panametrics
Inc. management, Waltham Massachusetts
Product Engineer position
Worked with Multiple PCB vendors to manufacture high
quality up to 17 layers PCB's with microvias and
blind vias against IPC standards.
Technical supports multiple Printing Circuit Assembly
houses to populated super high density 2 sided PCB's
to pass our board level tests up to 99% at their
facilities.
Directly, providing Ultrasonic Instrumentation
technical supports for the Test, Calibration and
Repair group.
Trained repair technicians
Wrote Test and NIST Calibration Procedures.
Wrote Engineering Change Orders (ECO's) to further
improving the product designs and manufacturing.
Performed instrument Failure Analysis at various
temperatures, humidity and vibration conditions
utilizing Diagnostics test software with test data
outputs and Thermotron Environmental chambers.
Interfaced among Design Engineering teams,
Manufacturing division, Field Service Technicians as
well as Sales and Customers.
4/1994 -9/1995 (1 year) Microwave Radio Corp.
Chelmsford, Massachusetts
Test Group Leader
Troubleshot, tested RF, Digital, Analog, Microwave in
digital Microwave Radio technology including 22-40
GHz GUNN oscillators, microwave VCO's, Harmonic
Frequency Controls (AGC), Down Converters, IF/DEMOD,
MUX, MODEM, Switching Power Supplies and etc..
Providing technical training for more than 20
technicians and responsible for developing the
corrective action within the group.
Managing high-paced Module Test Group with bench
testing, troubleshooting and scheduling.
11/1991 -4/1994 (3 years) Microcomputer Electronics
Corp. Kirkland, Washington
Senior Electronics Technician
Tested and troubleshot radio frequency, analog,
digital, microwave circuitry's for microprocessor
based systems (680000 family, HC11, Z8000, etc..) for
aircraft instruments such as: Cockpit Voice Recorders
(Black Boxes), Radio Reference Sensors (RRS) that
included Distance Measurement Equipments (DME), VHF
Omni-ranges (VOR) Global Positioning Sensors (GPS)
and Loran-C sensors (LCS).
Performed system testing and troubleshooting down to
component level.
Thoroughly, designed and built TEST SETS for all
system aforementioned and completed with electronic
assembly, machining, sheet metal works and
multi-level testing.
Evaluated the reliability of the newly system designs
and performed the failure analysis.
8/1990 -7/1991 (1 years) Pacific Communication Inc.,
Santa Ana, California
Senior Test Engineer
Designed, tested, tuned, programmed and troubleshot
the surface mounted digital transmitters for Heart
Monitors. Also modified, made new revisions in radio
frequency, digital, analog, Micro-controller unit
circuitries (HC11E9) of the high technology digital
transmitters.
7/1986 - 8/1990 (4 years) Gould Inc., El Monte,
California
Electronics Technician III
Tested, Troubleshot radio frequency, digital/analog
circuitries from system down to component level.
Worked with all of the sub-assembly modules of the
followings systems that including synthesizers,
receivers, power amplifiers, detectors, control
boxes, computer ranges, bearing ranges, wire chassis,
and etc.. such as Tactical Air Navigating System
(TACAN) including ARN84 (Air Borne), URN25 (Ship
Borne) for Navy and Air Force; Mobile Subscriber
Equipments (MSE) for US Army and NATO; also worked
with JTIDS (testing, troubleshooting the microwave
frequency circuits in the synthesizers and detectors)
for NAVY, AIRFORCE, ARMY and SUBMARINE.
Reference:
Available upon request.