RESUME
Electrical & Instrument Lead OIL &GAS FPSO
Professional Synopsis
< A dynamic professional with 22+ years of rich & extensive experience in
Commissioning & Operation Maintenance of entire Oil & Gas Offshore
Production Platforms, Gas Compressor and Treating Stations and Power
Generations.
< A dynamic Professional with 10+ Years of rich &extensive experience in
Installation, Commissioning & Operation Maintenance of entire Oil &Gas
FPSO Plat forms Tullow Modec Ghana KN21 FPSO,Prosafe Murphy Azurite
FDPSO,CNR Modec Baobab MV10 FPSO,Petrobras SBM Marlim Sul FPSO.
< Demonstrated abilities in Conversion, Construction, FAT, Commissioning,
Startup, and First Oil & Operation Maintenance, Documentation, Spare
parts inventory, Quality control for Hazardous Area Inspections and
Offloading on FPSO projects,Water Injection, Power Generation, Gas
Compressor Systems,Utilities and Marine Systems according to industry
standards ABS &DNV Standards.
< Directs and participates, with Instrument and Controls Technicians in the
maintenance of all instrumentation, control systems, DCS systems, and
quality measuring indicators. Includes ensuring that the appropriate
preventative and corrective maintenance is carried out in accordance with
manufacturer's specifications, and maintenance department's standards.
< Demonstrated abilities in implementation & management of changes systems
& controls in onshore supports.
< Identify, develop, and complete Management of Change, Engineering Change
Requests including Engineering assessments with respect to all electrical
& instrumentation & control engineering related systems and equipment.
This includes the design and engineering standards and specifications
review and development. Proposed change markups, electrical &
instrumentation equipment sizing, engineering proposals & calculations as
required for project approval
< Organizes and directs daily work for Instrument Technicians. Includes
carrying out routine, planned preventative maintenance and breakdown work
on all instrumentation equipment by ensuring that tools, equipment and
suitable Technicians are available to carry out the work in a safe and
cost effective manner. Includes: Management of spare part inventory in
warehouse.
< Ensure coordination of Electrical & Instrumentation activities with the
other Specialists within the Maintenance team.
< Preventive Maintenance jobs on Gas chromatograph Analyzers, Oil in water
Analyzers, Disolved Oxygen analyzers, H2S Analyzers etc.
< Analyzes equipment failures and prepares reports regarding findings a
cause of failures. Develops action plans for remediation of instrument
and control system failures and follows up on implementation of agreed
actions and Communicate with Vender and Onshore Supports in critical
situations.
< Provides technical support for personnel on Maximo and Amos.
< Monitors and ensures compliance with H.S.E. policies and procedures.
Active participant and champion of behavior based safety within his area
of responsibility. Ensures that instrumentation and control systems on
facilities are operated in a safe and environmentally sound manner to
comply with all applicable local laws and regulations in accordance with
company guidelines and policies.
< Insures by personal inspection or QA inspection that equipment returned
to service are fit for purpose and that equipment is returned within time
requirements.
< Assists in the development and implementation of training for all
craftsmen and trainees, to foster the continuous improvement and
development of the workforce.
< Understand and ensure that all within the team comply with key safe
systems of work such as but not limited to:-
< Recognition, risk Assessment(TRA) & Mitigation of hazards
< Permit To Work
< Tool Box Talks
< Isolation procedures
< PPE
< Flange and bolt alignment and torque
< Rigging, slinging & lifting techniques
< Scaffold integrity & working at heights
< Dropped objects & Trip Hazards
< Gas Testing
< H2S
< Confined Space entry
< Chemical hazards
< Extended long time Isolations
< Report all HSE incidents and advise and assist on incident investigations
and NOI reports.
< On completion of works ensure all relevant documentation, inspection
certificates, P&IDs etc, are updated for integration into the Company
DCC.
< Coach and train Local Technicians
< Observation Cards
< Essential to maintain a good working relationship with
< All Management Team Members
< Maintenance Supt
< Shutdown Co-coordinators
< Planning Team Leader
< HSE Manager
< Major Vendors and Suppliers
< Ghana onshore Electrical Instrument Support Team Engineers
< Sub-contract Leads
< Subsea HPU (FMC) Commissioning and operation maintenance.
< Strong Rectification problem solving & organizational abilities.
< Completed HAEE & HV/LV Switching Operation Training from ATEX at 2012.
< Installation and Maintenance Inspection of Instrument & Electrical
equipments in Hazardous areas Hydrocarbon Processing systems.
< Operation Procedure reviews and implementing.
< Coach as a Accesser for CBTA Training Modules.
< Coach as a Accesser for NVQ Training Modules
< Coach as a Trainer for Local Nationals.
< Coach as Development Plans for Instrument, Control System and Electrical
Trainees
< Commissiong and maintenance on Gas Turbine Generators (GE-LN 2500 & Solar
Mars 90&Titan) Woodward Micro net plus control systems.
< Power Management System.
< Brush Generator protection systems for excitation controllers.
< Integrated generator protection Systems.
< Electrical Operation and Maintenance of HV/LV switching Power generation
and Distributed systems.
< AEG UPS Systems and battery chargers operation maintenance and online
function test.
< Black starts Procedure.
< Electrical Isolation Procedure.
< Handover Procedures.
< Material Spare requisitions Preparations.
< Call for and participate to necessary technical and/or co-ordination
meetings required to achieve the performance of the work. Participate to
internal and external interface meeting
< Vibration CBM net assessments from petrofac and monitoring data
collection.
< Framo swivel operation & maintenance
< Supervisory in Permit to work, Mechanical isolations, Risk Assesment,JSA
< Completed Operation & Maintenance Training GE LN 2500 Gas Turbine
Generators and Solar Mars Gas Turbine Generators.
< Commissioning and Operation of SIEMENS SIVACON HV/LV Switch Gears
< Commissioning and Operations of Siemens Siprotec Relays..
< Commissioning and Operations of Siemens Sirius soft starters.
< Commissioning and Operation DCS SYSTEM GENESIS32,YOKAGAWA CS3000
< Experience in Maintenance Management Systems MAXIMO and AMOS.
< Performing Emergency team leader and Responsibilities.
< TRA preparations.
< Completed training on Yokagawa CS3000,Prosafe PLC,BOSTED control systems.
< Current OPITO accredited TBOSIET (Tropical Basic Offshore Safety Escape
Training) qualification and UKOOA accredited offshore medical clearance
certificate are required for offshore travel to the FPSO.
Main Organizational Details
Instrument &Electrical Coach
Coordinate maintenance disciplines (mechanical, electrical, instruments,
etc.) in a team and responsible for all maintenance activities for the
Operations Department and provide technical advice on request for
modifications and reliability studies encompassing all aspect of the
Operations, will ensure the integrity and the condition of all offshore
sites (conventional platforms, Floating Production Storage and Offloading-
FPSO, Floating Production Units).
Key Responsibilities:
Group safety awareness and performance
Champion facility-wide improvement efforts to reduce maintenance cost and
increase mechanical reliability- Assumes ownership of the Site's
Maintenance Policy and ensures that the detailed preventive and predictive
maintenance work programs are executed in line with the Policy.
Employee development, performance and satisfaction
implement best practices for items like equipment inspections, planning &
scheduling, and lubrication- Identify the need for, and assist with the
execution of, General Maintenance Contracts and Specific Maintenance
contracts, manage the contracts and ensure that Contractors are supervised.
Technical support for root causes failure analysis, incident
investigations, preventive and predictive maintenance, general maintenance,
and mechanical design issues
Good motivational skills; ability to influence and manage change; ability
to work well with Operations in a team environment
Supervisory skills including safety awareness of staff, budget control,
scheduling, and staff development
Leadership skills including setting goals, priorities, and performance
evaluations
Ability to lead and motivate multinational teams
Specific professional experience on turbo-machines (SOLAR(Mars &Titan), GE
LN2500, Nuevo Pig none Gas Compressors, Ariel reciprocating Compressors,
Clyde union Sea water pumps) aero derivative, gas compressors and pumps
Experience and knowledge of the maintenance, selection, and application of
process equipment such as exchangers, vessels, pumps, compressors, and
turbines Knowledge of material selection and corrosion
Knowledge of preventive and predictive technologies like vibration
analysis, oil analysis, and thermo graphy
Knowledge of best practices for fixed equipment inspections
Strong technical and problem solving skill for mechanical design, failure
analysis, and maintenance.
Good communication skills at all levels of the organization
Ability to manage multiple projects with varied priorities and drive them
to closure
Team management skills with teams of more than 10 people, multicultural
team
High level of knowledge of Instrumentation and Control equipment,
maintenance systems and methods
Supervisory Responsibility
Supervises: Senior Control system Specialist
Electrical & Instrumentation Technician
Instrumentation Technician
Electrical Technician
HV Electrician
plus a certain number of contractors on ad-hoc assignments
In addition will supervise many contractor personnel during major shutdown
periods
Contribute to maintenance procedures definition & application, cyber
security rules enforcement, personnel recruitment process, job descriptions
definition, yearly personnel appraisals performance, training programs
assignment and yearly budget proposal...
The on job training of employees, trainees by vendors The revision and
validation of the instrumentation and Control maintenance instructions
Attend face to face weekly/monthly engineering meeting or ad-hoc meetings
with Vendors Attend inspections when engineering presence is required
Validate the functional tests matrix and review the ICAPS databases Review
and comment on the Operational Test Procedures Provide input in the
sequencing, optimization and scheduling of the Commissioning activities
Review the Commissioning and Start-up spare parts list and ensure that
adequate spares are being procured Ensure that adequate testing equipment
is being provided with valid certificate Define the required resources
(manpower, vendor assistance, commissioning spares, testing equipment &
consumables) for the Tow and Offshore Commissioning execution Ensure that
the facilities are commissioned professionally following the Project
specifications. Ensure that ICAPS is updated and report progress against
spent man-hours Ensure that vendors are mobilized in due time Attend face
to face weekly/monthly engineering meeting or ad-hoc meetings with Vendors
Attend inspections when engineering presence is required Validate the
functional tests matrix and review the ICAPS databases Review and comment
on the Operational Test Procedures Provide input in the sequencing,
optimization and scheduling of the Commissioning activities Review the
Commissioning and Start-up spare parts list and ensure that adequate spares
are being procured Ensure that adequate testing equipment is being provided
with valid certificate Define the required resources (manpower, vendor
assistance, commissioning spares, testing equipment & consumables) for the
Tow and Offshore Commissioning execution Team Leader for Task Based Risk
Assessment Teams for practical IM training and work related activities
requiring a Permit to Work. Upkeep and maintenance of IM Practical
Workshop, Equipment and Apparatus Upkeep and maintenance of all specialist
practical IM HES training equipment Weekly IM Team meeting Monthly: IM
training facility operations inspection, monitoring and performance report.
Quarterly: IM training and facility performance and quality improvement
report. Review and digest the detail Design; Verify the deliverables to be
produced to or by the Contractor(s) related to Electrical & Instrumentation
Coordinate and supervise Electrical & Instrumentation studies for the
Central Process Facilities, associated drilling Pads, Overhead lines and
cables pulling;
. Check that the design is developed in line with the Pre-Project and
the Statement of Requirements;
. Ensure coordination of Electrical & Instrumentation activities with
the other Specialists within the project team. Ensure global
consistency of the design;
. Follow-up Contractor(s) activities. Control and comment all Electrical
& Instrumentation documentation issued by contractor(s) related to
engineering, procurement, project management, fabrication and tests,
and check that they are as per Company specifications and rules.
Review and answer to the Engineering Queries and Requests For Waiver;
. Call for and participate to necessary technical and/or co-ordination
meetings required to achieve the performance of the work. Participate
to internal and external interface meetings;
. Participate to Technical Reviews/Audits (HAZID, HAZOP, PTR). Ensure
follow-up and implementation of outcome;
. Liaise with project operating team to collect necessary data for the
project;
. Manage technical interfaces related to Electrical & Instrumentation
between EPC Contracts, LLI's;
. Provide support/participate to construction and commissioning for
activities related to Electrical & Instrumentation;
. Verify that the Contractor(s) are administrating properly the Company
Long Lead Items;
. Participate to site visits as necessary;
. Participate in weekly and monthly progress meetings;
. Provide input to the Field project Engineering for Electrical &
Instrumentation progress reporting, highlight critical problems and
propose corrective actions;
. Ensure and liaise with his field project engineer and design
authorship.
Petrofac International BP Rumaila Basra Iraq
July 20 th 2013 onwards to 20/08/13 Worked as a Instrument &Electrical Lead
Petrofac International BP Basrah,Iraq Looking after Rumaila Oilfield
Brownfield projects & maintenance activities. Work includes up gradation
for Degassing stations, Cluster pumping stations & wellhead
instrumentation. Reporting BP maintenance facilities team leader regarding
daily job activities. Leading the team of contractors,Supervisors &
Technicians. Planning & arranging materials, manpower for turnarounds
executions. Adhering strictly to ROO/BP safety guidelines & rules.
Arranging toolbox talk & safety talks before commencing works. Preparation
of risk assessments & method statements for critical job permits
Modec Tullow Jubilee FPSO MV-21 Ghana Offshore
Worked as an E&I Supervisor Nov 2009 to July 2013
Directs and participates, with Instrument and Controls Technicians in the
maintenance of all instrumentation, control systems, DCS FCS Yokogawa
CS3000 system systems, and quality measuring indicators. Includes ensuring
that the appropriate preventative and corrective maintenance is carried out
in accordance with manufacturer's specifications, and maintenance
department's standards
Responsible for Testing and commissioning & Operation Maintenance
activities on E house Siemens/HV, LV, MCC Switch gears, and Marshalling
Panels. Supervision of Precommissioning activities and operation &
maintenance,GE Gas turbine generators LN2500, Commissioning,UPS
Commissioning,FCS Yokogawa CS3000 system Commissioning of gas Compressors
UCP and Fire &Gas System Through Prosafe PLC,Telecommunucation System,LAN
System,CCTV,PAGA,Vsat and Navigation systems, Sea water Systems Vender
Documentation, Commissioning of Aker Marine sea water filtration SRU
systems, GE Gas Injection & HP Gas centrifugal Compressors,ODS Crude oil
Metering system, Krhonie Flare gas Metering systems Ariel LP gas
reciprocating compressors, Tyco Addressable Fire &gas systems etc.
Analyzes equipment failures and prepares reports regarding findings of
Analyzers Gas Samplers, Oil in water, IG System, Dissolved Oxygen
Analyzers, Gas chromatograph and samplers and Dew point Analyzers etc.
Aug 08 to Oct 09-Lead E&I Technician, AZURITE FDPSO Prosafe Production
Murphy Oil, Point Norie, DU Congo, West Africa (Keppel Shipyard and Congo
Offshore)
Designation - Lead E&I Tech
Responsibilities Include
< Responsible preparation for First Oil Commissioning Process
Modules.
< Responsible for preparation of shop drawings for execution of
project based on design drawings for all electrical systems with
specified construction standards (LV, HV, Low current system),
vender document Reviews.
< Responsible for preparation of Method Statement, Quality Control
Plan & Inspection Test Report, Fat Inspection.
< Responsible for the preparation & procurement of project materials.
< Responsible for Operation and Maintenance Deck Boiler and Steam
Generators.
< Responsible for Operation and Maintenance on 4 mat ion Control
systems.
< Responsible for provision of details, drawings & specifications for
field supervision of CCTV system, radar, TVRO, Fire & Gas
addressable Tyco system, Cargo control system V Sat satellite
Communication system SAAB tank radar systems, and Telecommunication
systems.
< Responsible for Operation and Maintenance mooring chain jack System
< Responsible for maintaining safety & environmental standards in the
work place according to company regulations.
< Responsible for monitoring, Operation and Maintenance of Fire & Gas
ESD system.
< Responsible for installation, testing & commissioning of LV & HV
panels, transformers & UPS.
< Responsible for operation & maintenance HV &LV Switching
Operations.
< Responsible for Configuration of ICCS Control system.
< Analyzes equipment failures and prepares reports regarding findings
a cause of failures. Develops action plans for remediation of
instrument and control system failures and follows up on
implementation of agreed actions and Communicate with Vender and
Onshore Supports in critical situations
< Reporting Work orders through MAXIMO System.
May 2004 to July 2008 - Lead Inst Tech, Baobab FPSO, Modec LLC, CNR
Abidjan, cote d Ivory, West Africa, MV11
Designation - Lead Inst Tech
Responsibilities Include
< Responsible for Operation &Maintenance of Control Flow, pressure,
Level and Temperature Instrumentation. First Oil and Commissioning
Preparation.
< Responsible for preparation of Method Statement, Quality Control
Plan & Inspection Test Report of Amos Preventive maintenance
System.
< Responsible for the Operation &Maintenance Gas turbine Generators
and Compressors.
< Responsible for preparation & execution of Maintenance according to
plan.
< Responsible for Flow Metering and calculations. Gas Chromatograph.
< Responsible for provision of details, drawings & specifications for
field supervision.
< Responsible for monitoring Time schedule of Maintenance and
preparation of management information system.
< Responsible for maintaining safety & environmental standards in the
work place according to company regulations and Follow PTW system
and Tool Box talks.
< Responsible for Configurations and Fault Finding of Foundation
Field Bus Instrumentation.
< Responsible for Installation, Testing & Commissioning of Control
panels, Tope side Equipments & UPS.
< Responsible for preparation of Operation & Maintenance manual for
all equipments.
< Responsible for Separator Nucleonic Level Measurement and OIL in
water analyzing.
< Responsibilities for Telecommunication,PAGA and CCTV,LAN Systems
< HPU FMC System commissioning and maintenance.
May 2002 to June 2004 - Inst Tech, Marlimsul FPSO SBM Brazil
Designation - Instrument Technician
Responsibilities Include
< Responsible for preparation of requirements of material for the
project.
< Responsible for planning daily activities. Preparation of First oil
< Responsible for installation, Testing & Commissioning of Control
panels
< Have good knowledge & experience in Boustead & DCS systems,
Emergency Shutdown Systems & Testing & Maintenance of all
electrical equipments.
< Responsible for Supervision of Commissioning, first oil, Offloading
activities
< Responsible for fault repair of Cargo control system, Saab tank
Radar systems.
< Responsible for Training of employees in the safety procedures.
< Responsible for maintaining safety & environmental standards in the
work place according to company regulations.
< Have good knowledge about work permit system & hazardous area
classification.
< Responsibilities for Telecommunication,PAGA and CCTV,LAN Systems
April 2000 to July 2002 -Inst Tech, Adma Opco, Zakum West Abudhabi, UAE
Designation - Instrument Technician
Responsibilities Include
< Responsible for installation, commissioning, preventive maintenance
& breakdown maintenance of all Instrument equipments (pressure,
level, Flow, temperature,) Responsible for offshore production and
Injection facilities.
< Responsible for Commissioning, Operation and maintenance of Gas
Injection Gas Compressors, Well Head Tower Instrumentation,
Telemetry Instruments, HIPPS, Solar power generation system, HIPPS
Integrity Systems.
< Monitors and ensures compliance with H.S.E. policies and
procedures. Active participant and champion of behavior based
safety within his area of responsibility. Ensures that
instrumentation and control systems on facilities are operated in a
safe and environmentally sound manner to comply with all applicable
local laws and regulations in accordance with company guidelines
and policies
< Responsible for Spare parts inventory from shore base ware house
and offshore and completion dossier preparations, Inspection Test
Reports completions. Etc.
Nov 1995 to July 2000 -Inst Tech, Adma Opco, Das Island Abudhabi, UAE
Designation - Instrument Technician
Responsibilities Include
< Responsible for installation, commissioning, preventive maintenance
& breakdown maintenance of all Instrument equipments (pressure,
level, Flow, temperature,) Responsible for Oil & Gas production,
storage, Gas Treating facilities and Utilities.
< Responsible for preparation of requirements of material for the
project.
< Responsible for planning maintenance jobs of daily activities.
< Responsible for Fault finding, Trouble shoot problems of
Instruments and control systems
< Report all the matters problems of Supervisor
< Have good knowledge & experience in DCS systems, emergency shutdown
systems & testing & maintenance of all electrical equipments.
< Responsible for supervision of Commissioning of Utility systems
< Responsible for fault repair of Ruston Gas Turbine compressors,
pumps.
< Responsible for training of employees in the safety procedures.
< Responsible for maintaining safety & environmental standards in the
work place according to company regulations.
< Have good knowledge about work permit system & hazardous area
classification.
< Responsible for training of PTW in the safety procedures
< Responsible routines of environmental Hydrocarbon Analyzers and
personnel gas detectors MSA and Cro con models.
1 Education and training
< First Aid,Cossh,JSA,DCS Cs-3000 Yokogawa,Prosafe plc,radiation
officer,HV/LV S.S.L.C. Government High School, April 1983
< Diploma in Electronics
< Training completed, Bosiet, Advanced Fire fighting, PSSR,
Elementary First aid.
< High Voltage HV/LV Switching Operation Training From ATEX
< Completed HAEE Training From ATEX
< Fundamentals of Condition Monitoring & Vibration data collection
CBM NET from Petrofac
< FRAMO Swivel Operation & Maintenance.
< Middle Management &Investigation Reports.
< Personnel gas detectors,H2S awareness Trainings.
< Completed HAEE & HV/LV Switching Operation Training from ATEX at
last year.
< Bosiet valid for up to 2016, OERTEM, Advanced Fire Fighting and
valid UOOKA Medical.
2 Personal Details
Nationality Indian
Date of Birth 15th Feb 1968
Communication Address Kokkat, Market Link Road, Irinjalakuda,
Thrissur.Kerala, India
India Phone No +919*********
Mobile +919*********,
Land line +914*********
E-mail *****************@*****.***
Marital Status Married
Passport No Z1985579
Desired Position E&I Supervisor/Instrument Supervisor/Senior
Instrument Tech
Computer Training Amos, Maximo, MS Word
References:
Pete Conway: FPSOSBM Saxi BAtuque. ************@*******.**.**
Peter Hernandao Fpso Kn21 Modec : *****.********@*****.***
Sembiyan Duraikannu :********.**********@*****************.***
Paul LANNON Bhumi armada Vietnam FPSO
Parama Shivam : Bhumi armada Nigeria FPSO ************@*******.***
Petrofac BP South Oil Company Basra Iraq
Modec Tollow Jubilee Ghana KN21 FPSO Ghana Offshore,West africa
AZURITE FDPSO Prosafe Production Murphy Oil, Point Norie, DU Congo, West
Africa
Baobab FPSO, MV-10 Modec LLC, CNR Abidjan, cote d Ivory, West Africa
Marlimsul FPSO SBM Brazil
Adma Opco, Zakum West Abudhabi, UAE
Abu Dhabi Gas co, Saudi Arabia Arabian Oil Company, India GAIL