Engineer Project
Resume:
Mahbub Ashraf
ab4ybv@r.postjobfree.com
Seeking assignments to perform as QA/QC Inspector / Engineer /Coordinator with key focus on vital
construction activities such as Mechanical / Piping / Welding Inspection / NDT with a growth oriented
organization.
Personal Profile:
Name
Mahbub Ashraf
Father’s name
Mainuddin Ahmad
Date of birth
01-01-1981
Permanent address
At-Fatehpur, op- Hathua, Dist. - Gopalganj, 841436, Bihar, India
Contact
ab4ybv@r.postjobfree.com
Skype: ashrafmahboob
Religion
Islam
Nationality
Indian
Marital status
Married
Language known
English, Hindi. Urdu, Arabic
Indian Driving license
LMV/MCWGH DL: BR 282**********
Professional Synopsis:
A Dynamic professional with overall 10 years of working experience (4 Yrs and 7 month in Middle East and 5 Years in
Indian industries) in the field of Inspection & Quality Control and execution for All the activities pertaining to Piping,
Fabrication & Installation for AG/UG of STEEL,MDPE & GRE in various project like QATAR GAS,RAS GAS,CITY
GAS Distribution and Ruwais Refinery Project.
Task Executed:
Preparation of weekly and monthly reports to client and senior management.
Piping line check to confirm that the lines is completed as per ISO and Preparation of surveillance report and NCR and
closing out of NCR and surveillance report, stage inspection reports, welder monitor sheets.
Coordinate inspection and client hold/witness points in accordance with ITP.
Piping line check punch list preparation witnessed hydro testing.
Pipe support inspection and reinforced pad leak testing.
Witness Hydro static pressure testing of pipe lines.
Reviewing gauges calibration certificates prior to release for hydro test.
Analyzing the requirements of temporary supports for A/G piping during hydro test.
Review work method statements and procedures.
Monitored welder’s performance, reviewed welder qualification record and welding activities to ensure the work is
being carried out in accordance with approved welding procedure and client requirement.
Verification of materials, materials receiving inspection prior to release for fabrication and installation.
Conducted/Reviewed PMI (Positive Material Identification).
Conversant with ASME B31.3, AWS D 1.1, API 1104, ASME Sect-II, V, VIII, IX codes and relevant standards .
Radiographic film interpretation and evaluation in compliance with with relevant codes.
The completion of QC site instructions and coordinate their closure & review of inspection test packages during the
course of construction activities.
Experiences:
1. DAEWOO E & C, August 2012 to May 2013
as a qa/qc PIPING INSPECTOR
Client- TAKREEK, PMC-Mott Mac Donald
Project-RUWAIS REFINARY EXPANSION PROJECT, RUWAIS ABUDHABI, UAE
Roles & Responsibilities:
• Review Contractor’s method statements, QC procedures, ITP
and Quality Plan and assist with establishing acceptable working practices
for construction activities.
• Monitor delivery of permanent materials and ensure the Quality of products
/ Consumables / materials comply with requirements of established
Standards & Specifications.
• Perform routine surveillance, inspection, monitoring, auditing & assurance
of Contractor’s site activities (Fabrication and Welding) in accordance with
the Projects and Contractors, Specifications, in acssscordance with the Projects
and Contractors, specifications, ITP and Quality Plans.
• Review and comment upon Contractors daily inspection records for activities
covered and investigate any anomalies/queries.
• Reviewed WPS (Welding Procedure Specifications) & PQR (Procedure
Qualification Record).
• Witnessed/conducted WQT (welder qualification test) as per ASME BPV SEC
IX.
• Monitored /Checked welding parameters like preheat, inter-pass
temperature,
amperage, voltage, travel speed and type of welding electrode/fluxes are
used in accordance with approved WPS.
• Monitored welder’s performance, reviewed welder qualification record and
welding activities to ensure the work
is being carried out in accordance with approved welding procedure and
client requirement.
•Monitored welding / visual inspection of materials like CS, LTCS (Low
temperature carbon steel), Stainless steels, Cr-Mo alloys.
•Conducted/Reviewed PMI (Positive Material Identification).
•Visual inspections of field joints on pressure piping, reactors, and heat
exchangers.
•Monitored Pre Heat/PWHT (Post Weld Heat Treatment) and Reviewed PWHT
charts in accordance with client procedure and specification.
•Reviewed radiographs according to ASME BPV SEC V.
•Supervision on QA/Inspection, Fabrication, welding, installation, PWHT, NDT
and Painting.
•Implement work as per quality manual, quality plan and approved Iso-
drawings.
*Continued Roles & Responsibilities of Daewoo E&C
Professional Education:
Bachelor Of Engineering In Mechanical (BE)/ Charted Engineer
From Institution of Mechanical Engineers (India) Mumbai, Pursuing
Diploma in Mechanical engineering
From Institution of Mechanical Engineers (India) Mumbai
Diploma In Office management:
Microsoft word
Microsoft excel
Microsoft outlook
Microsoft PowerPoint
AutoCAD 2002(2D,3D) (Autodesk Certification )
Other Achievements:
Introduction to Occupational Safety & Health on Construction Projects, CCIC, Qatar
First Aid & Basic Life Support,Hamad International Training Centre.( Doha), Qatar
Passport Details:
Passport No. E 4302545
Date of issue- 03/04/2004
Valid up to – 02/04/2014
Place of Issue- Patna
*Continued Roles & Responsibilities of Daewoo E&C
•Piping line check punch list preparation witnessed
hydro testing.
•Pipe support inspection and reinforced pad leak
testing.
• Reviewing gauges calibration certificates prior to
release for hydro test.
•Analyzing the requirements of temporary supports for
A/G piping during hydro test.
• Piping line check to confirm that the lines is
completed as per ISO.
•Review hydro test package to verify the completion of
NDT requirements.
•Preparation of hydro test package as per ISO.
•Verification of materials, materials receiving
inspection prior to release for fabrication.
• Ensure project quality objectives are attained.
2. Company – Med Gulf Construction Company, Qatar
Project-Helium Recovery Unit 2/RASGAS
Consultant-AIR LIQUID ENGINEERING
Period – Oct 2011 to August 2012
Position Title – Piping Engineer
Roles and Responsibilities:
•Raises technical query to main contractors.
•Preparation, planning and execution of field instruction.
•Develops piping information issued to other
departments during the detailed engineering phase of
the project.
•Communicates and interfaces with other project
Design and Engineering disciplines.
•Checks other department's design drawings and
Supplier equipment drawings.
•Planning and execution of Piping erection and
Installation.
•Daily, monthly progress report preparation and
submission to Construction manager on regular basis
and resolving deviations problems during execution
work.
Continued Roles & Responsibilities of MedGulf Construction Qatar
*Continued Roles & Responsibilities of MedGulf Construction Qatar
•Ensure that all fabrication related equipment are
available and in a safe working order.
•Fine-tuning and control of the company homemade
software to be utilized efficiently and reflect the on
ground statistics.
•Coordinate with site to get their requirements
•Smooth interface Coordination with Client to fulfill
their requirements according to the standard.
•Coordinate with QC inspector and client QC inspector
for achieving sound quality of work.
•Execute the work according to the project procedures
as method of statement, PTW & project HSE
procedures.
3. Company – MOODY INTERNATIONAL (TPI) New Delhi
CITY GAS DISTRIBUTION project
Client - Indira Prastha Gas Limited
Period - Feb 2009 to Oct 2011
Position Title – Pipeline inspection engineer
Roles and Responsibilities:
•Familiar with International codes & standards such as ASME
Section IX, ASME Section VIII, and Indian Standards.
•Visual testing of welds, raw material, Piping and related
Fittings, plates, various types of valves, Co-ordinate with
Other Departments, Client and sub-Contractors for the
Smooth functioning of QA/QC activities.
•Coordination in Internal and external auditing.
•Manpower management and review interim and final
Documentation.
•Supervise the Quality Control functions/activities of a
project or its parts, including quality control inspection
schedules and the collection of quality records.
•Review and approval of production work packs and
punching outstanding items Review and approval of
production test packs and punching outstanding points. •Monitoring of electrodes for proper storage and
handling, Witnessing of Hydro test.
•Performing and witnessing of NDT depending on job
Requirement. Offering welds for NDT as per specifications. •Reviewing of RT films, NDT reports, coordinating with
safety department To carryout Radiography test.
•Inspection of Raw material and consumables as per
the Correlated material test certificate dimensions.
Continued Roles & Responsibilities of Moody International
*Continued Roles & Responsibilities of CCIC,Qatar
•Prepare monthly reports of QC activities.
•Liaise with the work coordinator in case of non-
conformances and ensure corrective actions are
taken.
•Verify calibration status of inspection, measuring and
testing equipment used.
•Review of approved welding procedure, Qualification
records and Welding operators.
•Liaise with the company representative for the
conduct of day-to- day quality related activities of the
service contract.
•Ensure fulfillment of all inspection and test
requirements at all the stages as per the CQP and
contract requirements.
•Compile and review pertinent records of inspection
and test for individual job orders.
•Ensure implementation of HSE policy and HSE plan
with in the area of their jurisdiction.
•Participate in HSE activities and when required by the
contract manager, site manager or HSE advisor.
•Issue non –conformance report with corrective
actions.
5. Company - M.k. EnterprisesTISCO, Jamshedpur
Period – December 2002 to October 2005
Position Title -.Mechanical engineer
Responsibilities:
•Daily reports of the accomplishments on construction
activities.
•Responsible for documentation of field instructions and
giving technical assistance to erection problems.
•Planning activities of fit-up/erection of spool.
•Raises technical queries to main contractors.
•Preparation, planning and execution of field instruction.
•Develops piping information issued to the other departments
during the detailed engineering disciplines.
•Check other department’s design drawing and supplier
equipment drawing.
•Daily, monthly progress report preparation and submission
to construction manager on regular basis and resolving
deviation problems during execution --of work.
•Ensure that all fabrication related equipment is available
and in safe working order.
Continued Roles & Responsibilities of Moody International
•Preparation and qualification of welding procedures &
welders for CS as per ASME section 1XInspection of
welding consumables like electrodes, filler Wires and
shielding gas as per the specification.
•Witnessing of welder qualification test for SMAW Piping
material identification as per the isometric Drawing.
•Witnessing welder qualification tests,NDT and Hydro
test.
•Coordinating with clients project inspection unit and
the Sub-contractor for necessary inspections for witness
and Hold points.
•Documenting all necessary result in proper files.
•MDPE Pipeline/PNG work & City Gas Distribution Work.
•Supervising the survey, laying including GI Pipes, QA/QC
Documentation, Inspection, Pneumatic Testing, N2
Purging & Commissioning of MDPE of Gas Pipelines.
4. Company – CCIC, Client-Qatar GAS
Project- Qatar Gas II Expansion Project, QATAR
Period - December 2005 to October 2008
Position Title- QC Inspector piping/welding
Responsibilities:
•Verify that correct materials are utilize for all works.
•Be familiar with and refer to the applicable,
Specification and standards.
•Ensure that copies of applicable QC plan (and QC
procedures where necessary) are available at the
location of work.
•Ensure that all the welding works carried out in the
service contract are as per the approved procedure
and plans.
•Witness welder qualification test in association with
the company representative and welding engineer.
•Ensure that the welders are qualified to the WPS.
•Check and record welding parameters and verify
compliance with approved WPS.
•Set up a numbering system for the welds, compile and
maintain isometrics containing weld number and
welders identification.
•Monitor welder performance, receive and review NDT
reports.
*Continued Roles & Responsibilities of CCIC,Qatar
*Continued Roles & Responsibilities of CCIC,Qatar
Managerial Skill:
Management by objective & strong communication skills.
Strong Leadership & team building skill.
Planning, Organizing & system development skill to stream line the workflow.
Interested Field:
Quality Control
Third Party Inspection
Marine
Power Plant
Oil and Gas Exploration
Oil & Gas Onshore and Offshore
Oil Refinery Process Industries
Steel Industries
Date 05/06/13
Mahbub Ashraf
Place patna
Contact this candidate