Education

CMM software training: Calypso basic, advanced, and curve; USOFT basic;

UMESS basic.

MCOSMOS software basic training.

GD&T training: Basic, Advanced, and CMM Operator specific GD&T

Austin Community College, AAS, Microcomputer Applications Support, 1 year

Community College of the Air Force, AAS, Communications Management, 32

credit hours

Supervisor and Management Counseling Training

Communications Management Technical Training

USAF - Total Quality Management (TQM) class, 32 hours

USAF - Safety and Training Instructor classes

Several USAF in-residence management and leadership schools

Experience

Defiance Metal Products (DMP)

Quality Inspector / CMM Programmer

Mar 2013 - Present

. Romer CMM with Hexagon 2010 (PC DMIS software).

. Mitutoyo Bright Apex bridge CMM w MCOSMOS software.

. Digital, dial, and venier calipers.

. Optical Comparator.

. Pin, Radial, Angle, and Thread gages.

. Geometric Dimensioning and Tolerances (GD&T) used along with the CMM

to accurately measure first article parts.

. Developed CNC programs to measure tight tolerances using Hexagon 2010

PC-DMIS software.

. Able to read sectional, 3D and third angle projection drawings.

. High concentration and attention to detail for customer specific

inspection requirements.

. Inspect sheet meta parts for dimensional accuracy using engineering

drawings and per customer specifications.

. Proficient with all current versions of MSWord, Excel, Access,

PowerPoint, and Outlook.

Employment Solutions, Inc., Denver, CO

Quality Inspector / CMM Programmer

Nov 2012 - Jan 2013

. Brown & Sharp CMM with Hexagon 4.3 (PC DMIS software).

. Mitutoyo Micro-Height and Trimos digital height measuring devices.

. O. D. and I. D. micrometers.

. Digital, dial, and venier calipers.

. Optical Comparator.

. Pin, Radial, Angle, and Thread gages.

. Bore gages.

. Sine plates, 1-2-3 Blocks, and Surface plates.

. MAHR surface finish measuring equipment.

. Geometric Dimensioning and Tolerances (GD&T) used along with the CMM

to accurately measure first run machined products and first article

parts.

. Developed CNC programs to measure very tight tolerances using Hexagon

4.3 DMIS software.

. Able to read sectional, 3D and third angle projection drawings.

. High concentration and attention to detail for customer specific

inspection requirements.

. Inspect sheet metal, and machined parts for cosmetics, surface finish,

and dimensional accuracy using engineering drawings and per customer

specifications.

. Proficient with all current versions of MSWord, Excel, Access,

PowerPoint, and Outlook.

Aerojet, Redmond, WA

Quality Inspector 4/ CMM Programmer

Nov 2011 - Oct 2012

. LK CMM with CAMIO 6.3 (PC DMIS software).

. Mitutoyo Micro-Height and Trimos digital height measuring devices.

. O. D. and I. D. micrometers.

. Digital, dial, and venier calipers.

. OGP Optical Comparator.

. Smart Scope.

. Pin, Radial, Angle, and Thread gages.

. Bore gages.

. Sine plates, 1-2-3 Blocks, and Surface plates.

. MAHR surface finish measuring equipment.

. Geometric Dimensioning and Tolerances (GD&T) used along with the CMM

to accurately measure first run machined products and first article

parts.

. Developed CNC programs to measure very tight tolerances using CAMIO

6.3 DMIS software.

. Able to read sectional, 3D and third angle projection drawings.

. High concentration and attention to detail for customer specific

inspection requirements.

. Inspect sheet metal, and machined parts for cosmetics, surface finish,

and dimensional accuracy using engineering drawings and per customer

specifications.

. Proficient with all current versions of MSWord, Excel, Access,

PowerPoint, and Outlook.

Synthes USA, Monument, CO

Quality Inspector / CMM Programmer

Mar 2001 - Oct 2011

. Zeiss CMM with Calypso software

. O. D. and I. D. micrometers.

. Digital, dial, and venier calipers.

. Optical Comparator.

. Zeiss Surfcom surface finish measuring equipment.

. Pin, Radial, Angle and Thread gages.

. Geometric Dimensioning and Tolerances (GD&T) used along with the CMM

to accurately measure first run machined products and first article

parts.

. Able to read sectional, 3D and third angle projection drawings.

. High concentration and attention to detail for customer specific

inspection requirements.

. Inspect machined parts for cosmetic, surface finish, and dimensional

accuracy using engineering drawings and per customer specifications.

. Proficient with all current versions of MSWord, Excel, Access,

PowerPoint, and Outlook.

. Developed CNC programs to measure very tight tolerances using Zeiss

Calypso software.

. Knowledgeable of Material Review Board (MRB) and Corrective Action

Report (CAR) processes

. Created detailed measurement procedures for critical part measuring.

. Developed a measurement tracking database using Access.

Nelms-Donham Mfg, Austin, TX

Supervisor / First Article Inspection / CMM Programmer

Sept 2000- Feb 2001

. Zeiss CMM with UMESS and USOFT software.

. Mitutoyo Micro-Height and Trimos digital height measuring devices.

. O. D. and I. D. micrometers.

. Digital, dial, and venier calipers.

. Optical Comparator.

. Pin, Radial, Angle, and Thread gages.

. Bore gages.

. Sine plates, 1-2-3 Blocks, and Surface plates.

. Zeiss Surfcom surface finish measuring equipment.

. Geometric Dimensioning and Tolerances (GD&T) used along with the CMM

to accurately measure first run machined products and first article

parts.

. Developed CNC programs to measure tight tolerances using Zeiss UMESS

and USOFT software.

. Able to read sectional, 3D and third angle projection drawings.

. High concentration and attention to detail for customer specific

inspection requirements.

. Inspect sheet metal, and machined parts for cosmetics, surface finish,

and dimensional accuracy using engineering drawings and per customer

specifications.

. Proficient with all current versions of MSWord, Excel, Access,

PowerPoint, and Outlook.

. Assigned work areas and prioritized work flow.

. Trained new personnel on current procedures and policies.

Kachina/BOC Edwards, Austin, TX

Supervisor / QA Production Inspector / CMM Programmer

Aug 1999 to Sept 2000

. Brown & Sharpe manual CMM

. O. D. micrometers.

. Digital, and dial calipers.

. Radial and Angle gages.

. Zeiss Surfcom surface finish measuring equipment.

. Inspect sheet metal, machined parts, and assembled components for

cosmetics, surface finish, and dimensional accuracy using engineering

drawings and per customer specifications.

. High concentration and attention to detail for customer specific

inspection requirements.

. Assigned work areas and prioritized work flow.

. Trained new personnel on current procedures and policies.

Applied Materials, Austin, TX

Supervisor / First Article Inspection / CMM Programmer

1998 to 1999

. Zeiss CMM with UMESS and USOFT software.

. Mitutoyo Micro-Height and Fowler/Trimos digital height measuring

devices.

. O. D. and I. D. micrometers.

. Digital, dial, and venier calipers.

. Optical Comparator.

. Zeiss Surfcom surface finish measuring equipment.

. Pin, Radial, Angle, and Thread gages.

. Bore gages.

. Sine plates, 1-2-3 Blocks, and Surface plates.

. Geometric Dimensioning and Tolerances (GD&T) used along with the CMM

to accurately measure first run machined products and first article

parts.

. Able to read sectional, 3D and third angle projection drawings.

. High concentration and attention to detail for customer specific

inspection requirements.

. Inspect sheet metal and machined parts for cosmetics, surface finish,

and dimensional accuracy using engineering drawings and per customer

specifications.

. Proficient with all current versions of MSWord, Excel, Access,

PowerPoint, and Outlook.

. Developed CNC programs to measure tight tolerances using Zeiss UMESS

and USOFT software.

. Assigned work areas and prioritized work flow.

. Trained new personnel on current procedures and policies.

. Provided periodical refresher training and review of current standards

and work instructions.

. Ensured all personnel complied with all standards, work instructions,

and policies.

CRYCO Quartz, Inc., Austin, TX

Production Quality Inspector / CMM Programmer

1996 to 1998

. Zeiss CMM with USOFT software.

. Mitutoyo manual CMM.

. Mitutoyo digital height gage.

. O. D. micrometers.

. Digital and dial calipers.

. Able to read sectional, 3D and third angle projection drawings.

. High concentration and attention to detail for customer specific

inspection requirements.

. Inspect quartz products for cosmetic and dimensional accuracy using

engineering drawings and per customer specifications.

. Proficient with all current versions of MSWord, Excel and Access.

. Developed CNC programs to measure tight tolerances using Zeiss USOFT

software.

US Air Force

Supervisor / C-CS Project Manager / Budget Analyst

1984 to 1995

. Supervisor

. Assigned work areas and prioritized work flow.

. Trained new personnel on current procedures and policies.

. Documented all accomplishments, training, and disciplinary actions

of personnel.

. Ensured all personnel complied with all standards, work

instructions, and policies.

. Provided periodical refresher training and review of current

standards and work instructions.

. Completed annual personnel performance evaluations within the

allotted time restraints.

. Provided open communications with all departments, upper management

and subordinates.

. Resource Management

. Prepared and certified invoices and vouchers for accounts payable,

insuring no late payment penalties.

. Prepared and submitted financial reports to US Air Force Higher

Headquarters.

. Administered all Communications-Computer Systems (C-CS) government

contracts, project, program, prints, and human resource documents.

. Experience and training in production control, quality control,

OSHA safety standards and Total Quality Management (TQM).

. Computer and Software Management

. Proficient with all current versions of MSWord, Excel, Access,

PowerPoint, and Outlook.

. Developed policies and procedures using MSWord, Excel and

PowerPoint.

. Created an inventory and parts tracking spreadsheet using Excel for

customer specific kit assemblies.

Communications-Computer Systems Records Manager

* Proven Communications-Computer Systems (C-CS) records manager for

11 years.

* Designated records destruction officer for classified and sensitive

records.

* Ensured destruction and disposition of C-CS records was

accomplished in accordance with base policies and federal

regulations.

* Maintained the Communications-Computer Systems Installations

Records (C-CSIRs) for base wide communications.

* Maintained records to support C-CS Program Management functions to

include Unit Manpower documents, Master Agreement file, Host/Tenant

Support Agreements.

* Created records control schedules and submitted to the base plans

librarian and US Air Force Higher Headquarters for approval.

* Distributed schedules to records custodians and various base

agencies.

* Developed work center training plans, operational procedures, and

established performance goals for personnel.

* Coordinated C-CS records with other staff agencies and setup

working groups, panels and prepared the agenda for base review

boards.

US Air Force

Air Cargo Specialist

1975 to 1984

. Load Planner / Quality Control

. 25K Loader and 40K Loader

. 4K, 10K and 10K AT Forklift

. Warehouse Tug

. Hazardous Material Specialist and Trainer

Contact this candidate