Engineer Mechanical
Resume:
RESUME
VAIBHAV
E-mail:- ***********@**********.***
OBJECTIVE
To seek the challenging Position in Field of Mechanical engineering:
PROFESSIONAL EXPERIENCE.
1. TECNIMONT.
Worked as Sr.Piping Engineer in their (Integrated Gas Development) IGD
Hapshan 5 project for Gasco in Abu Dhabi. From February 2012 till May
2013.
JOB RESPONSIBILITY:
Assessment of daily Progress of fabrication and fit-up. Review
the test package, approved by the client after inspection,
getting the punch from executing team, and send those punch
point to the concern person of the subcontractor, checking the
weld joint summery inspection the golden joint, co-ordinate
with sub contractor in construction as per the requirement and
priority, in issuing the material.
2. LINDE ENGINEERING INDIA.
Worked as a Principal Engineer in their (Sulpher Recovery Unit
)S.R.U for H.P.C.L (Hindustan Petroleum Corporation Ltd.). From
June 2011 till January 2012.
JOB RESPONSIBILITY:
Inspection of incoming material, checking T.C as per the
material received. Clearing the IMIR, Inspection of daily
erection and fabrication activity at site and fabrication shop.
visual inspection of welded joint Maintain the record of weld
joint, Drawing and material used.
3. SAMSUNG ENGINEERING.
Worked as a Sr Engineer (piping) in their (MEG) Project for
Indian Oil Corporation Ltd Panipat Refinery. From August 2007
till February 2011.
JOB RESPONSIBILITY:
Inspection the process of cement lining for U/G Piping.
Inspection of grid blasting, cleaning, wrapping-coating and
holiday test for U/G Piping. Weld visual inspection, checking
the electrode at the time of welding, conduct the witness from
EIL. Done PMI for S.S materials. Technical
clarifications/discussion with the vendors. Coordinate with the
field engineering team and vendors with construction team.
4. J.M.E with CONSOLIDATED CONTRACTOR CO. LTD.
Worked as a Sr. Piping Engineer in their Qatar Petroleum Co.
Exp-2 Gas Project at Qatar. From September 2006 till May 2007.
JOB RESPONSIBILITY:
Assessment of daily Progress of fabrication and fit-up. Making
and review the test package, approved by the client, getting
the punch from executing team, and send those punch point to
the concern person of the subcontractor. After getting the
mechanical clearance arrange the hydro test for the package.
5. A Joint venture of TOYO, IDRO, JGC and DIC (TIJD) IRAN.
Worked as a Piping Engineer (Piping) in their South Pars Gas
field Development Phase 6, 7, 8 for Iranian Oil & gas Company
Iran. From February 2006 till August 2006.
JOB RESPONSIBILITY:
Review the piping drawing and discuss with our engineering team
and clear the problems, visual inspection at the site for weld
joints, checking the R.T films with the client, arrange retake
if there is any problem in the weld joint. Making Line history
sheets for the test package to get the mechanical clearance,
offer the packages for mechanical clearance to the client,
6. DAELIM ENGINEERING & CONSTRUCTION COMPANY LTD.
Worked as a Piping Engineer in their Hydro Cracker Unit
(H.C.U) for Indian Oil Corporation Ltd Panipat Refinery
Expansion project India. From September 2003 till January 2006.
JOB RESPONSIBILITY:
Inspection the line for mechanical clearance like (Checking the
material by the isometric as per the spec, line should match
with the P&ID also, flow checking as per the isometric, support
as per the isometric, flange alignment specially for the
rotating equipment.), and inspect by the pmc or client.
Making/Review the hydro test package, check document require
for the mechanical clearance in the package and get the
Mechanical clearance. After getting the mechanical clearance,
submit the package for hydro-test.
7. PUNJ LLOYD LTD
Worked as a Mechanical Engineer (Piping) in their Sulpher
Recovery Unit (S.R.U) Project for Chennai Petroleum Corporation
Limited Expansion III. From January 2002 to August 2003.
JOB RESPONSIBILITY:
Inspection the piping fit-up, checking the material as per the
isometric, checking the heat no. on the pipe and finings,
Special taking care for S.S piping- material handling,
fabrication, using. S.S tool, purging and checking filler wire.
Make the good co-ordination with client, consultant and sub
contractor. Provide the safe working atmosphere in the workshop
and the site area and taking care for safety. Coordinate with
other department to move the work
8. DAELIM ENGINEERING & CONSTRUCTION COMPANY LTD.
Worked as a Junior Engineer (Piping) in their D.H.D.S Project
for Indian Oil Corporation Ltd Baroda Gujarat India. From
January 1999 to November 2001.
JOB RESPONSIBILITY:
Fit-up inspection, witness by the client, arranging the spool
line wise and area wise, sending the spool as per the site
requirement. No load motor test, water flushing, air blowing,
and leak test after final box-up in the pre commissioning
activity.
PROFESSIONAL QUALIFICATION
. Graduate Degree in Mechanical Engineering from Institution of
Mechanical Engineers (IME (India)) -2002.
. E-commerce from Asset International, Dehradun - 2000.
. Diploma in Professional Business Computing from Tulce a
division of Tata Info Tech Ltd in 1998.
. Production Management from All India Council for Management
Studies, Chennai, India (Correspondence Course) - 1998.
. Diploma in Mechanical Engineering from IME (India) -1997.
EXTRA CURRICULAR ACITIVITY
Training in Civil Defense Services - Top Rank amongst the
Participants - 1993.
Got best employee award by the SAMSUNG ENGINEERING in - 2007.
PERSONAL DETAILS
Date of Birth 10th Feb 1976
Father's Name Mr. Nand Kishore
Permanent Address 86/1 Vishwakarma Colony,
Bhandaribagh, Dehradun - 248001
Uttarakhand, INDIA
Contact No 91-135-*******
PASSPORT DETAILS
Passport No H1549157
Date of Issue 21-11-2008
Date of Expiry 20-11-2018
(VAIBHAV)
Contact this candidate