Engineer Pvt Ltd

RESUME

R.KARTHIK

*************@*****.***

Mobile No: 995-***-****

Career objective:

Seeking a challenging position where there is potential for growth

and advancement that will enhance my technical skills and provide me an

opportunity to work on challenging projects.

Experience:

Having an experience of around 8 years as a Designer involving

Detailing, modeling and designing. And I have a hand on experience in AutoCAD

2008, CADD Works P&ID 2008, CADian 2004, PRO–E wildfire 3.0 and CATIA -

V5 (R16).

Experience Details:

Presently working as Cad Engineer in ADHIAM THERMAL SYSTEMS &

SOLUTIONS PVT LTD, VEEKAY ENGINEERING SERVICES from 04.03.2013 to Till

date.

General Arrangement, Estimation, Detail Drawing Preparation.

Standard Drawing Preparation.

Worked as Senior Cad Engineer in Petro constructors Pvt Ltd deputed by BRN

Engineering Services. Chennai, from 1.12.2007 to 26.09.12.

• DESIGNATION : SENIOR CAD ENGINEER.

• PROJECTS HANDLING:

•

1. P207 - Vegetable Oil Refinery Plant.

• Capacity : 250 TPD Upto 500 TPD.

• Future Expansion: 1000 TPD.

•

1. P206F - Biodiesel Plant.

• Capacity : 250 TPD Upto 500 TPD.

•

•

1. P206G - Glycerin Refining.

• Capacity : 120 TPD.

•

1. P206M - Methanal Rectification.

• Capacity : 60 TPD.

My Key Roll:

Equipment As-built: Reactors, Chiller, Cooling Tower, Vessels, Tanks, Agitators,

Heat Exchangers, Storage Tank, Layout Preparation, Machine Drawing.

General Arrangement, Estimation, Fabrication Drawing Preparation.

Captured As-built information of Plant and created P&ID’s from Scratch in Cad

System. (Using Cad Worx PID-5 Years, SP PID 3 Months).

Process Flow Diagram Preparation. (PFD).

Heat & Mass Balance Drawing preparation (HMB).

Legend Sheet with Valves, Abbreviations, Line Codes, Misc Items, etc Created in

CAD System.

Consolidated BOM Preparation.

Isometric Drawing Checking, Support Marking.

Worked as Design draftsman Engineer in Fas Tools Ambathur from

01.04.07 to 30.11.07.

Nature of work: Fastener tool designing.

CLIENT: Ramsays India Pvt Ltd –Chennai, India.

CLIENT: Koyas Fasterners India Pvt Ltd –Chennai, India.

Worked as Draftsman in Intense spark Technology Solutions

Coimbatore from 1.08.2005 to 31.03.2007.

Nature of Work: Tool designing.

Worked as a Faculty and Designer in CPT Mayiladuthurai from 6.02.2004

to 25.07.2005

Educational qualification:

MASTER DIPLOMA IN CAD in CADD CENTRE- CHENNAI.

D.M.E., (Diploma in Mechanical Engineering) 2001-2004

A.V.C Polytechnic College, Mayiladuthurai.

Electives: Foundry technology

S.S.L.C, Kittapa higher secondary School, Mayiladuthurai.

Project Summary:

Title: Anti Roll Bar (BY USING PRO-E)

1

Description: A suspension element (used at the front, the rear, or both ends of

a car) that reduces body roll by resisting any unequal vertical motion between the

pair of wheels to which it is connected. An anti-roll bar does not affect suspension

stiffness when both wheels are deflected equally in the same rection. This

mechanism is Modeled and Animated using the Software, PRO-E.

Title: Steering Gear Mechanism (BY USING CATIA)

2

Description: The recalculating ball steering gear has been traditionally used on

rear-wheel-drive cars and many light trucks. This type of steering gear uses a

worm gear and ball bearings to rotate the sector shaft, which connects to the

pitman arm. The rack and pinion steering gear is usually found on front-wheel-

drive cars. A pinion gear moves a horizontal rack gear connected to the steering

linkage. Rack and pinion steering gears are most common due to the popularity

of front wheel drive. Their compact design does way with the need for an idler

arm, pitman arm and center link. This above said mechanism is Modeled using

the Software, CATIA.

3 Title: Pneumatic Governor System (BY USING PRO-E)

Description: Done a project on “DESINING OF PNEUMATIC GOVERNOR

SYSTEM BY USING PRO-E” as part course work in department of Mechanical

Engineering A.V.C. Polytechnic. The Governor automatically controls the supply

of working fluid to the engine with the varying load conditions and keeps the

mean speed within certain limits. This software program is of least time –

consuming and with high accuracy, as it can be easily dealt by even person with

little knowledge about it. It is also very interactive with the user as it incorporates

a built-in dialog box control exposing various areas of design to the user.

Technical skills:

Drafting Soft ware’s: AutoCAD 2012, CADian 2004, Cad works PID 2008.

Modeling Soft ware’s: Pro –E wildfire 2.0 (Sketching and part modeling &

Assembly modeling detailing and mechanism).

CATIAV5 R16 (Sketching and part modeling and

Assembly).

Analysis Software: ANSYS 9.0.

Simulation Software: L.M.S VIRTUAL lab version 5B (Using multi body

Simulation)

Other Known software’s: Solid edge version 18, Solid Works 2010, MS Office and

MS Project 2003, Auto cad P&Id 2010, Cad works Plant

3D 2008.

Area of Interest: Design Engineering & Automobile Engineering.

Personal Details:

Name - R.Karthik

Date of Birth - 02.12.1981

Father’s Name - M. Ramadoss

Gender - Male

Nationality - Indian

Martial Status - Single

Pass Port No - J7289023

Language Known - Tamil & English

Address for Communication.

R.KARTHIK

c/o: M.Venkatesan,

No 27,1st Main Road

Evp Santhosh Nagar,

Ramapuram

Chennai-89.

Contact this candidate