Quality Engineer

MOHAMED FAWZY ABOU EL-AZM mohamed madkour

MBA, B.Sc.Mech.Eng, Pg.Dip.Offshore Engg, Pg.Dip. Welding Engg., Pg.Dip.

Business,

ASQ- CMQ/OE,CQA&CQIA,AWS-CWEng & CWI, ASME-AIS, API 510 PVI, ISO 9001 Lead

Auditor,

NACE CIP 2, LEEA-CLI,TWI-AUT CSWIP 45&CSWIP 3.2.2, CSWIP WQCC, ASNT Level

II, OSHA-G&C

Work Profile:

More than sixteen years of experience in new construction projects,project

Management & supervision, quality management, conformity, total quality

management (TQM) and certification, in the fields of Oil & Gas Industry,

Petrochemicals,Fertilizers,Power Generation Plants and Heavy Industry as

well as Asset Integrity Management & In-service Inspection activities

including inspection, maintenance,alteration, re-rating & repair and

fitness for purpose studies, with rational familiarization and in-depth

knowledge of the related international standards and governing rules such

as ISO, ASQ, EFQM,PMI,EN,ASME, API, ASTM, AWS,AISC,,BS, NACE,EEMUA,

NBBPVI etc. Possessing strong leaderships, business & management

skills and vast engineering & technical capabilities.

Academic Credentials:

Post Graduate Credentials:

. Master of Business Administration (MBA), University of Atlanta (USA).

. Post Graduate Diploma in Offshore Engineering, Marine Dept., The Arab

Academy For Science, Technology and Maritime Transport, Alexandria,

Egypt.

. Business Admistration Diploma from The American university of Cairo

(AUC), Egypt.

. Professional Welding Technology Diploma from "Atomic Energy Authority",

Egypt.

Graduate Credentials:

. B. Sc. Mechanical Power Engineering, June 1996, Faculty of Engineering,

Alexandria, Egypt.

Professional Credentials:

. ASQ-Certified Manager of Quality/Organizational Excellence (CMQ/OE#

15825)

. ASQ-Certified Quality Auditor (CQA# 44681)

. ASQ-Certified Quality Improvement Associate (CQIA# 8925)

. AWS Certified Welding Engineer, "AWS-CWEng#0408001G",USA

. ASME Authorized Inspector Supervisor "ASME-AIS" for Boilers & Pressure

Vessels from The National Board Of Boilers and Pressure Vessel Inspectors

(NBBPVI), OH, USA.

o N.B. COMM. No. 12976 -USA

o GEORGIA State commission No.758 -USA

o Authorized Inspector A&B Endorsements from NBBPVI -USA

o Georgia Department of Labor Certificate No.405, USA.

. API 510 Authorized Pressure Vessels Inspector,USA

. Certified lifting Inspector from LEEA,UK

. CSWIP Welding Quality Control Coordinator TWI,UK

. Senior Welding Inspector From TWI, "CSWIP 3.2.2 Certificate No. 19136",UK

. Automatic Ultrasonic Interpreter From TWI,"AUT CSWIP NDT 45",UK

. AWS Certified Welding Inspector, " AWS-CWI#00071241",USA

. ISO 9001:2008 -QMS Lead Auditor, Certified by Bureau Veritas

. ISO 50001-Energy Management System Internal Auditor, Certified by SGS

. ISO17025 Internal Auditor, Certified by Velosi

. NACE Certified Coating Inspector Level 2-CIP No.33716,USA

. Certified Six Sigma Yellow Belt from Chicago Training institute,UAE.

. HSE Certification:

o Certified trained OSHA general industry,USA

o Certified trained OSHA construction industry, USA

o Sea Survival Certificate from "Arab Academy for Science,

Technology and Maritime Transport", Egypt

o Managing Safety: LSUP (A) from "DuPont", UAE

. ASNT LEVEL II (RT, UT, MT, PT) As Per SNT-TC-1A,USA

Training and Education Experience :

1. Mentor and Coach for fresh graduate engineers and developees in ADCO

Abu Dhabi,2010 to present

2. Preparation course for "ASME Authorized Inspector Supervisor "Trainees,

Bureau Veritas, UAE, 2009.

3. Trainer and training supervisor for ASME Authorized Inspectors through

on job training for Bureau Veritas Egypt &Qatar Branches, from 2006

until 2009

4. Trainer and training supervisor for fresh graduate engineers in Bureau

Veritas Egypt branch in the field of mechanical inspection,quality,

welding & lifting equipment in Bureau Veritas Egypt from 2001 until

2009

5. Examiner and Supervisor for several graduation projects for

undergraduate engineers in several engineering colleges from 2005 until

2009 for ;

. Mechanical production Engineering Dept., Welding and Metallurgy

branch,Faculty of Engineering, Alexandria University,

Alexandria, Egypt.

. Marine and Naval Architecture Dept., Offshore Engineering branch,Faculty of Engineering, Alexandria University, Alexandria,

Egypt.

. Marine and Mechanical Engineering Dept., The Arab Academy For

Science, Technology and Maritime Transport, Alexandria, Egypt.

6. Safe lifting operations for offshore crane operators, Bureau Veritas

Egypt /SUCO, 2009.

7. Safe lifting operations, Bureau Veritas Egypt /Baker Hughes, 2009.

8. Safe lifting operations, Bureau Veritas Egypt /GeoTech Inc., 2008.

9. Safe lifting operations for crane operators, Bureau

Veritas/Petrojet, 2008.

10. Preparation course for "ASME Authorized Inspectors Trainees", Bureau

Veritas, Qatar 2008.

11. Preparation course for "ASME Authorized Inspectors Trainees", Bureau

Veritas Bahrain 2008.

12. LEEA(UK) preparation course for Entry Examination, Bureau Veritas

Egypt, 2008

13. NDE Techniques, Egyptian Welding Academy (EWA), 2006.

14. Safe lifting operations for onshore crane operators, Bureau

Veritas/SUCO, 2006.

15. Automatic Ultrasonic Theory and Practice, Egyptian Welding Academy

(EWA), 2005.

16. Welding Qualification Codes And Standards by ASME IX-API 1104-AWS

D1.1, Egyptian Welding Academy (EWA), 2004.

17. Welding Inspectors Preparation Course, Quality Services Group (QSG),

EWA&ENPPI, 2003.

18. Welding Inspectors Preparation Course, Egyptian welding Academy (EWA),

2002.

19. Welding Inspectors Preparation Course, Egyptian welding Academy

(EWA), 2001.

20. Welding Inspectors Preparation Course, International Specialized

Engineering Services (ISES) &

DEVCO, 2001.

Conferences and Workshops:

o Participated Mediterranean Offshore Conference (MOC); 2004, 2006&2008

Alexandria-Egypt.

o Participated The 4 th African Regional Conference & 1 th Exhibition On

Non-Destructive Testing organized by The African Federation of Non-

Destructive Testing (AFNDT), 2006, Cairo-Egypt.

o Participated in the technical, educational and commercial workshops

organized by the Egyptian Welding Society (EWS) since 1994.

o Participated in the technical and educational workshops organized by

the Egyptian Welding Academy (EWA) since 2001.

Work Experience Records:

From 18 May 2009 Till Present

Abu Dhabi Company for Onshore Oil Operations (ADCO).

Function: E&P Division: HSEQ Department: Projects Quality

Job title: Senior Quality Control/Quality Assurance Engineer(2010:Present)

Senior Welding & Material Specialist (2009:2010)

. Establish and prepare company in-house specifications and standards

. Team Building and Mentoring & coaching new UAE developees and young

engineers

. Direct and coordinates with quality consultants and certification

bodies activities related to company accreditations as ISO

9001,14001,BSI18001,BSI PAS 55,ISO 50001 and SKEA&EFQM

. Perform audits for construction field sites along all phases before,

during and post construction

. Perform vendors and suppliers pre-qualification and performance check

assessments and audits

. Review/approve welding repair procedures, Welding Procedure

Specifications, Procedure Qualification Records, Welder Qualification

Records and the preparation of technical reports on problems

associated with welding.

. Coordinate welding activities and operations incurred during

fabrication, operations and erection of structures and the general

labor operations of the welders during all phases of construction.

. Work in conjunction with project teams/contractors during projects

operations.

. Plan and execute work plans for construction projects activities.

. Participate in design reviews to ensure designs are optimized for

welding and that the customer's requirements are reflected in bills of

material by the assignment of proper welding specifications.

. Prepare project specific specifications to communicate new

requirements to Engineering and Manufacturing teams.

. Establish clear plans and complete commitments on time and within

requirements.

. Conduct failure analyses of failed welds, investigate and evaluate

welding defects to determine appropriate cause(s) and corrective

action(s).

. Provide training and/or training tools to raise awareness of special

project requirements.

. Provide Support to the Operations and Engineering groups to ensure

that critical materials and services meet contract specification.

. Perform special projects as directed by the ADCO 's

Procurement/Quality/Operations department heads.

. Assist projects quality Department in welding and inspection

activities.

. Assist in drafting of Contract Exhibits related to quality and

technical requirements. Conduct tender reviews ad prepare

clarification requirements of tenders.

. Perform technical, quality, safety and management system audits and

inspections of supply.

. Perform audits of contractor's quality management systems and safety

management systems. Thorough knowledge of ISO 9001, 14001&18001 .

. Develop, and supervise all pre-job inspection activities.

. Provide effective training and development of the quality personnel in

ADCO.

. Train and Mentor in Welding, Metallurgy, Corrosion, Materials

selection and application supporting the combined learning and

development within the team and organization.

. Manage and supervise failure investigations and related roots cause

analysis including laboratory testing for material, equipment and

welding fractures.

. Monitor and review training programs & certification for subcontracted

welders and welding operators in ADCO projects.

. Facilitates the review and disposition of customer deviation requests

requiring client's approval, including logging and tracking all NCR's

(manufacturing and operational) and related correspondences.

. Help to establish quality system processes and primarily responsible

for monitoring and benchmarking progress in all projects tasked

quality assurance activities.

. Provides a Continuous Improvement focus for goods and services.

. Facilitates repair of damaged goods

. Operating Environment, Framework and Boundaries: Working often

independently to complete a test, while updating the head of quality

as to the status. Work both in the office and the field.

. Communications and Working Relationships: with the drilling operations

managers and supervisors, drilling engineers, petroleum engineering

sections.

. Day to day working relationship based on quality & technical issues.

. Problem solving / Complexity: The complexity and degree of encountered

problems can be high and very critical to production operation, safety

and cost.

. Provide expertise in the selection of materials for new construction

project in Oil&Gas.

. Execute Root Cause Failure Analysis on materials related failures.

. Troubleshooting and resolve corrosion, erosion and temperature related

material concerns

. Investigate alternative materials for continuous improvement

activities

. Share in development, implementation and strengthen the Integrity

Management Operating Window proactive monitoring program to identify

and minimize life cycle impacts

. Support the development of repair plans and work procedures

. Support for development of welding procedures for routine and complex

repairs and critical applications

. Support in the analysis and development of fitness for service

assessments of piping and equipment

. Audit suppliers to ensure procedures are in place and followed for

procurement, handling and repair

. Act as internal expert for materials purchasing and handling, ensuring

appropriate language is included in orders and contracts

. Support internal audits for application and compliance to procedures

and standards

. Update standards and work toward consistency of applied standards for

materials, NDE and welding.

. Keep current with industry code, standards and improvements providing

continuous improvement opportunities where ever possible

From 23 May 2001 Till 17 May 2009

BUREAU VERITAS, EGYPT BRANCH.

Department: Energy and Process.

Job title: Industry Operations Manager (2006:2009)

Senior Industry & Offshore Surveyor(2002:2006)

Industry & Offshore Surveyor(2001:2002)

1. Work Scope & Responsibilities: Representative For BUREAU VERITAS As An

independent Verification Authority And Conduct The Implementation Of

B.V. Rules & Regulations For Surveillance Of Third Party And/Or

Certification Services Supplemented With The Applicable International

Specifications, Standards And Codes Issued By ASME, API, ASTM, AISC,

AWWA, AISI, ANSI, ASNT, ASM, NFPA, NACE, NB, SSPC, DNV, BSI, EEMUA,

ECCS, IMO, DIN, EN&ISO And Complemented By The Applicable In-House

Specifications As SHELL, BG,BP,ENPPI,AGIP,SOROS,BECHTEL,INTEC,TECHNIP&

EXXONMOBIL For The Following Activities:

Business & Managerial Roles: Develop business plans, budgets and work

strategies, Represent BV in conferences, workshops affaires meetings

and business & technical negotiations, Prepare submission documents

for proposals and offers regarding new jobs/projects tenders documents

as well as formal and official correspondences, reports, certificates.

Team Building and management, Supervise BV surveyors and any other

subcontracted inspectors in BV jobs/projects execution. Provide

technical support for BV senior management, Surveyors &inspectors as

well as BV customers and clients, Perform commercial, marketing and

sales activities and presentations for TPI and certification services

and business development.

1. Projects Management: Projects Expediting, Execution And Total Quality

Management For All Construction Phases Including Pre-Commissioning &

Commissioning Till The Handover & Start-Up For EPIC Projects Of

Downstream And/Or Upstream For Oil& Gas And Energy & Processing

Industries.

2. Welding and Metallurgical consultations:

Perform technical advising and consultancy services for BV clients and

customers in the Middle East zone concerning:

. Welding and material technical problems troubleshooting and

solving.

. Third party approvals for welding procedures.

. International welding codes and standards technical support.

. Failure investigations in material, welding, pressure equipments

and offshore structures

. Prepare training plans,review training programs and supervise

certification examinations for welding schools for construction and

fabrication companies in the field of offshore structure

installations, pipelines(onshore/offshore),piping (utilities,

process &power) and boilers and pressure vessels.

3. Pressure Retaining Items; Boilers, Heat Exchangers, Pressure

Vessels&Piping

"Third Party Inspection and ASME/NB Authorized Inspection"

I-ASME CODE INSPECTION REQUIREMENTS:

. ASME Certification and T.P.I For New Construction Including;

Design Engineering Calculations Review, Shop Fabrication, Field

Assembly & Erection And All Relevant Welding, NDT, Inspection,

Testing, QA/QC, precommissioning and Commissioning.

. Perform technical guidance, consultation and support for ASME

and NB Certification&Re-Certification for Manufacturers and

Repair Organizations including quality manual preparation,NDT

system preparation, Code calculations and engineering package

for demonstration items,welding system preparation and

documentations, shop fabrication and welding activities

performance till ensure the readiness and the consistency to the

Code requirements for the Code stamp holder preparations before

the final ASME joint review audits.

. Perform Pre-joint review for Code stamp holders under

preparation for ASME joint review for Code stamps certification.

. Attend ASME joint review audits for Code Manufacturers under

Code Stamps qualification.

. Perform Annual audits for Code stamp holders in order to monitor

the consistency and the code conformity with the qualified Code

Stamp holders.

. Assist in maintaining the competency of the trainee authorized

inspectors during the on job training of the 80 hours training

period before the issuance of the final National Board ID Cards

at an acceptable level through methods such as discussions of

work related topics; unique problems and their solutions;

informal question and answer discussion sessions and whatever

other means that may be deemed beneficial.

. Maintain records of the trainee authorized inspectors assigned

and a description of their assignment.

. Audit and document the performance of each trainee authorized

inspector assigned to a shop or field site regularly in order to

ensure their competency before applying for the National Board

final commissioning stages.

. Take the necessary corrective action to ensure compliance with

the code requirements at the shops and sites for customers.

. Record in the AI diary, the dates of visits to shop and field

locations when related to code works.

. Verify that the manufacturing organization has a valid National

Board Certificate of Authorization to register with the National

Board before commencing any Code jobs.

. Review design drawings and the traveler or process sheet in

order to understand the scope of the intended work.

. Review the method and extent of material defect repairs, and

when found acceptable, allow initiation of such repairs.

. Verify that weld joint preparation will allow full penetration

when full penetration welds are specified or required.

. Verify that the stamping, including the National Board stamping,

is correct and the nameplate (if used) is properly attached.

. Verify the manufacturing organization's representative has

signed the manufacturer's data report or National Board

registration form and that it is correct before applying the

date, signature, National Board Commission number, and

endorsement.

II- NB CODE INSPECTION REQUIREMENTS:

1. In-service Inspections:

Perform in-service inspections and inspections associated with

authorization, in process and acceptance of repairs and alterations

as defined in the National Board Inspection Code (NBIC) including

the following duties:

. Apply legislation regulations and/or owner/user requirements and

inspection requirements where the item is installed.

. Verify the stamping or nameplate is legible and represents the

item described on the inspection documentation.

. Perform external and internal inspections and witness any

required pressure tests. Part RB of the NBIC should be used to

guide these activities as a minimum; however, applied

legislation regulations requirements and/or owner/user

requirements will always take precedence.

. Report the inspection results, including any nonconforming

conditions, in the manner prescribed by the applicable

legislation regulations and/or owner/user requirements.

2. Repairs and Alterations (NBIC)

. Verify that the "R" Certificate Holder has a valid National

Board "R" Certificate of Authorization and the activity is

permitted under the scope of the certificate.

. Verify that the "R" Certificate Holder has the current NBIC and

addenda.

. Monitor the quality control system and verify the system is

being implemented to the requirements of the NBIC.

. Verify that all material complies with the NBIC.

. Verify that all welding procedure specifications, procedure

qualification records, and welder and welding operator

qualification records conform to the NBIC.

. Verify that heat treatments as required by the NBIC have been

performed and properly documented.

. Verify that nondestructive examinations and tests as required by

the NBIC has been performed and properly documented.

. Witness pressure tests as required by the NBIC.

. Verify that information in the NBIC report forms is correct,

and that the responsible representative of the "R" Certificate

Holder has signed it.

. Verify that the stamping or nameplate is correct and, where

applicable, the nameplate has been properly attached.

. Assist in maintaining the competency of the stamp holders

quality inspectors, customers inspectors and Bureau Verities

Industry Surveyors at an acceptable level through methods such

as discussions of work related topics; unique problems and their

solutions; informal question and answer discussion sessions; and

whatever other means that may be deemed beneficial.

3. Offshore Industry:

3.1 Oil and Gas Production Platforms:

. Offshoreyard Fabrication, Offshore Installations &Erection, Heavy

Lifts Of Fixed Offshore Steel Structures As Templates, Jackets,

Monopods, And Deck Modules.

. Hook-Up's, Tie-In's, Erection and Installation of T.S.F. Equipments

and Process Piping Systems.

. Aged Offshore Structures Major Survey for above and Under Water

Modules, In-Service Inspection, Assessment, Repair, maintenance And

Re-Certification.

. Welding (SMAW, GTAW, GMAW, FCAW & SAW), NDT (VT, PT, MT, RT & UT),

Painting And Coating Applications, CP Anodes Installation, Pilling,

Grouting, QA/QC Systems, Hydrotesting, Leak Testing, Gas Pressure

Testing, Pre-Commissioning And Commissioning.

2. Subsea Pipelines Systems And Associated Facilities:

. Line Pipes Inspection, Coating Shop CTE and Concrete Weight

Coating Applications and CP Anodes Installation.

. Rigid Pipelines S, J&Reel laying, Re-routing, Supporting, Crossing

Pipelines, Free Span Rectification & Correction and Trenching.

. Umbilicals Installation and Reel Laying.

. Flexible Pipelines Installation and Reel laying.

. Diving, ROV and Subsea Metrology Operations.

. Fabrication and Installation of Risers.

. Pipelines Pull-In, Near Shore, Shore Approach, And Landfall Works.

. Repair and Remedial Pipelines Stabilization and Protection.

. Fabrication And Subsea Installations for Pipe Spools, Pipe Jumpers,

PLET's And PLEM's.

. Above Water Tie-In's, Welding (SMAW, FCAW, Automatic GMAW), NDT

(VT, PT, MT, RT, UT & AUT), Field Joints Wrapping And Weight

Coating, QA/QC Systems, Flooding, Pigging, Gauging, Hydrotesting,

Pre-Commissioning And Commissioning.

. Risk Assessment Sessions for Offshore Pipelines Construction

Activities.

2. Offshore Vessels Service:

STOLT LB200, SEAWAY EXPLORER, SEAWAY FALCON, SEAWAY HAWK, SEAWAY KESTREL,

PETROJET11, PETROJET12, PETROJET17, ZAHRA, TIM SUMEDAnd MARIDIVE300 and

ALLSEAS-SOLITAIRE.

4. Cross Countries Pipelines and Networks Construction:

. Erection and Installation of Line Pipes.

. Fabrication And Installation Of Crossing Spools For Roads

Interfered Pipelines And Water Channels.

. Piping Systems Erection and Equipments Installation for Wellheads.

. Valve Stations Erection and Installation.

. Tie-In's Welding, NDT, Field Coating, CP Systems Installation,

Hydrotesting, Pigging, Gauging, Purging, Pre-Commissioning And

Commissioning.

5. Storage Tanks: Construction and In-Service Inspection.

6. Crude Oil Heaters: In-service inspection.

7. Process Piping: Fabrication, Erection and Hydrotesting.

8. Cranes and Lifting Equipments: In-service Inspection, Load Testing and

Re-certification.

9. Compressed Natural Gas "CNG "Re-Fueling Stations: Site Erection,

Commissioning and Start Up.

10. Reviewing For Approval: Quality Programmes & Manuals, WPS's, and

WPQR's, WPQT's

Procedures for PWHT, NDE and Painting &Coating.

11. Testing Labs: Participation &Witnessing For Mechanical Testing and

Chemical Analysis.

12. Line Pipes : Certification Inspection of Production Mill Factories or

Suppliers.

13. PURCUREMENT T.P.I: Materials, Equipment, Plates, Sections, Pipes and

Fittings.

14. Safety Relief Valves: Testing, Calibration and Certification.

15. Container Tanks: In-Service Inspection and Certification.

From 1 May 2001 Till 21 May 2001

POWER & OIL CONSTRUCTION CO. (P.O.C).

Job Title: Welding & NDE Consultant.

o Work Scope &Responsibilities: Performing The Desired Consultation

Activities & Supervision Of Repair Welding, NDE & Heat Treatment Of

Kiln Tire Fracture For Production Line No. 4 For Alexandria Portland

Cement Co. (APCC) "Blue Circle, Egypt Branch".

From 6 May 2000 Till 7 May 2001.

ARCHIRODON CONSTRUCTION (OVERSEAS) CO. SA. EGYPT BRANCH.

"MIDTAP PETROLEUM PRODUCTS & COKE LOADING FACILITIES PROJECT"

Job Title: Mechanical Q.C. Engineer.

o Work scope & Responsibilities: Conduct And Supervise The Project

Quality System For The Construction And Installation Of The Following:

1. Storage Tanks, Pressure Vessels, Piping Systems & Steel Structures.

2. Fire Fighting Systems.

3. Corrosion Prevention Systems (Galvanization, Painting, Wrapping & CP

Systems).

4. Ship loader, Marine Loading Arms, Pumps and Compressors.

5. Thermal Insulation.

6. Manage and supervise all project welding,NDT and testing activities

including welding certifications for WPS's, PQR's& Welders/Welding

operators certifications.

From 16 August 1999 till 4 May 2000

HITACHI PLANT ENGINEERING & CONSTRUCTION CO. LTD., EGYPT BRANCH.

Job title: Project Engineer.

o Work Scope & Responsibilities:

1. Fabrication & Erection of Piping, Ductworks & Steel Structures.

2. Machinery Installations.

3. Responsible For Supervision of Welding & Quality Control Activities.

4. Maintenance of Heavy Industrial Production Plants as Cement, Iron &

Steel.

5. Technical Office.

6. Internal Auditing With ISO 9002 Specifications.

7. Manage and supervise all project welding,NDT and testing activities

including welding certifications for WPS's, PQR's& Welders/Welding

operators certifications.

From Dec. 7, 1996 till July 21, 1999

SANTA FE INTERNATIONAL CORPORATION, EGYPT BRANCH.

Job Title: Assistance Welding Superintendent (July, 1997 Till July,

1999).

o Work Scope &Responsibilities:

1. Responsible For Reviewing Work Documents, Specifications And Material

Control.

2. Supervision of Offshore Drilling Rigs Construction for Compliance with

American Bureau of Shipping Rules and Regulations.

3. Supervision of Fabrication, Erection, Welding and Quality Control of

Onshore/Offshore Drilling Rigs Piping Systems, Tanks, Vessels and

Steel Structures.

4. Supervision of drilling equipment and rig machinery installations.

5. Supervision of Pre-commissioning and commissioning of offshore/onshore

drilling rigs.

6. Manage and supervise all project welding,NDT and testing activities

including welding certifications for WPS's, PQR's& Welders/Welding

operators certifications.

Job Title: Maintenance Engineer. (Dec. 7, 1996 Till July 1997)

o Work scope & Responsibilities:

1. Responsible For Monitoring, Operation And Maintenance Of

Onshore/Offshore Drilling Rigs Equipment. Machinery and jacking

systems.

2. Executing Protective Maintenance System of Drilling Rigs Equipment and

machinery.

3. Perform and execute maintenance scheduled activities and actions as

per the maintenance plan.

4. Perform machinery diagnosing, repairing, revamping and overhauling.

SANTA FE DRILLING RIGS SERVICE:

. Land Rigs: SF-92, SF-94, SF-104, SF-143, SF-147, and SF-169 & SF-170.

. Offshore Jack-Up Rigs: Key Manhattan, Key Singapore, Key Hawaii, SF-

105, SF-124&SF-141

Professional Training Record:

1.

2. Quality Management Program,Chicago Institute, Dubai,UAE-2011

3. Train The Trainer, Al Rowad for Training & Development, Abu Dhabi,UAE-

2011

4. Project Management Program, Chicago Institute,Dubai,UAE-2011

5. Problem Solving & Decision Making, Spread Training, Abu Dhabi,UAE-2011

6. Murdoch Business Master Class, Murdoch University Dubai,, Abu

Dhabi,UAE-2011

7. Managing Risks for Projects,The George Washington University/ESI

International,, Abu Dhabi- UAE-2011

8. Project Management Professional Preparation Course, PMP-AMIDEAST-

Egypt-2010

9. Project Management Professional Preparation Course, PMP,PMI-AGC, Abu

Dhabi- UAE-2010

10. Safe Driving in desert, ADCO, Abu Dhabi- UAE-2010

11. H2S protection, ADCO, Abu Dhabi- UAE-2009

12. Introduction to tendering,ADCO,2009

13. "ISO 9001:2008" Upgrade Training Course,Bureau Veritas,Egypt-2009

14. Business Psychology,

15. BPV Authorized Inspector Supervisor Course (B) "NB". (Aug.2008)

16. Annual Training for ASME Authorized Inspectors "ONE/TUV/BV".

(Aug.2007)

17. ISO 9000:2000 Series Auditor/Lead Auditor Training Course "BVQI",

Egypt -2006

18. TQM&ISO 9000 Implementation specialized in Quality management

Engineering, middle East Human Resources Development Training Center,

Egypt 2006

19. Diploma In the art and science of Neuro-Linguistic Programming, The

international NLP Trainers association,Egypt-2006

20. Submarine Pipeline Installation Design&Buckling Analysis With Offpipe

Software Application"BV/PMS".(May 2006)

21. Vibrations Measurement In Industry Specialized in Mechanical

Engineering "ME-HRDC".(May 2006)

22. Workshop on Art of Presentation"ASMS".(Feb.2006)

23. Workshop on Technical Writing "ASMS".(Feb.2006)

24. Annual Training for ASME Authorized Inspectors "ONE/TUV/BV".

(Sept.2005)

8. AUTOMATIC ULTRASONIC INTERPERTATION "TWI". (March 2005)

9. BPV Authorized Inspector Course (A) "NB". (Nov.2004)

10. Automatic Ultrasonic Testing (AUT) "EWA". (August 2004)

11. Offshore Pipelines Engineering Course, Basis of Subsea Pipeline

Software`s."Bureau Veritas".

(August 2004)

12. Design of Pressure Vessels, ASME VIII, Div.1 "ONE/TUV/BV". (July

2004)

13. Boilers Feed Water Treatment and Operation "ICTC". (April 2004)

14. Managing Safety: LSUP (A)"DuPont ". (March 2004)

15. ASME Authorized Inspector Preparation Course" ONE/TUV/BV".

(Jan.2004)

16. ASME B31.1, Design and Fabrication "ASME/AUC". (Jan.2004)

17. Corrosion Engineering Fudamentals"ICTC". (March 2004).

18. ASME Section VIII Div.1, Design and Fabrication for pressure

vessels "ASME/AUC". (December 2003)

19. Welding Technology & Metallurgy "EWA". (JULY 2003)

21. CSWIP3.2 Senior Welding Inspector Preparation Course "TWI/EWA". (JULY

2003)

22. Pressure Vessels "Enppi Training Center". (March 2003)

23. Sea Survival "Arab

Contact this candidate