Quality Control
Resume:
RESUME
DOKKADA SANTOSHKUMAR
PRIYADARSHINI COLONY
VIKASNAGAR
NEWGAJUWAKA
VISAKHAPATNAM(530026)
MOB.NO.+919*********.
E-mail: *********************@*****.***
POST APPLIED FOR: QA/QC WELDING INSPECTOR.
CAREER OBJECTIVE:
A growth driven self-motivated professional offering over 5+ years of rich experience in Inspection
and Execution of projects related to Oil & Gas Industry, Petrochemicals, Distribution Pipeline and
Gas Plant Project Construction and structural jobs as a QA/QC Welding Inspector coupled with
strong leadership and communication skills to contribute in achieving organization’s long-term goal.
Academic Portfolio: DIPLOMA IN MECHANICAL(Distancemode)
Additional Qualification:
Qualification in NDT
ASNT Level II in Radiographic testing as per SNT-TC-1A.
ASNT Level II in Penetrant testing as per SNT-TC-1A.
ASNT Level II in Magnetic Particle testing as per SNT-TC-1A.
ASNT Level II in Ultrasonic testing as per SNT-TC-1A.
Code knowledge:
I am familiar with following standard and codes.
1- ASME SEC. 2- ASME SEC.VIII DIV.I
3- ASME SEC. IX 4- ASME B 31.1, B 31.2, B 31.3.
5-API 1104 6-ASME SEC.II.
BLASTING, PAINTING (EXPLOSEDURE)
AS QC INSPECTOR
Before Blasting inspection
• Surface Condition
• Metal Temperature
• Weather Conditions by Whirling Hygrometer
• Grit Size and TC
• Wind force
• Compressor pressure
• Safety of blasting equipment
During Blasting
• Pressure checking of compressor
• Grit condition in hopper
• Nozzle distance & Angle
After Blasting
• Substrate preparation as per SIS 055900
• Profile checking by 1 ) profile needle gauge
2 ) Testex tape
Before prime coat
• Surface condition
• Time period
• Paint technical data sheet
During prime coat
• WFT
• Volume solids
• Weather condition
After prime coat
• Drying and curing time
• DFT by Elcometer
• Paint effects
During 2nd coat /mid coat
• Same as Sr .No.1
DUTIES & RESPONSIBILITIES OF QA//QC WELDING INSPECTOR
Review of inspection and Test plan (QAP) per QC-Procedure, Client Specification and Approved
•
Drawing.
Review of the project scope of work, material specifications, and drawings for any conflict with
•
the requirement of the Quality standards and advise the Engineering Dept to initiate the corrective
actions with the client prior to commencement of work.
Preparation of WPS & PQR.
•
Interpretation of Isometric drawings and Weld maps.
•
Witness of welding procedure qualification, welder performance qualification & approval.
•
Witness mechanical test on materials like Bend test, Hardness test, Tensile test, Charpy impact test
•
etc.
Inspection of joints fit up, alignment and dimensional accuracy as per drawing requirements.
•
Offering of NDT Test involves to Inspection Agency & Approve..
•
Review of NDT Test Report with TPI or Client.
•
Defect mapping & attain the repair work.
•
Quality control documentation as per Quality inspection Procedure.
•
To ensure related activities are carried out in accordance with project specification
•
Preparation of welding inspection summary
•
Inspection of joints fit up, alignment and dimensional accuracy as per drawing requirements
•
Witness of Hydro testing, PWHT & Pre heat, post heat requirements etc.
•
Verification of package punches lists and preparation of Quality dossiers.
•
Maintaining welding inspection/NDT reports and record tracking
•
Carry out blasting and painting inspection of all the jobs as per specified requirement.
•
Preparation of welding inspection summary / joint tracking log.
•
Verification of punch list and test packages.
•
Co-ordination with client or TPI or Contractor.
•
Carry out internal audit of related shops and office.
•
Preparation of QC Report.
•
Total Experience
COMPANY NAME: A.R.ENGINEERING COMPANY
Period : 26-10-2010 to still continue
Position : QA,QC Welding inspector.
Project : I.P.C.L in RABALE, Navi mumbai
Job Profile :
Fit-up inspection of weld joints.
•
Preparation of daily welding report Interpretation of radiography films as per applicable code.
•
Preparation QA/QC dossier as per client requirement.
•
Coordination with NDT team at site.
•
Monitoring of Preheating/ Post heating / post weld heat treatment and electrode backing activities.
•
Inspection and testing of safety relief devices. Preparation of test pack and witnessing of hydro
•
test.
Interacting & coordinating with Clients for Quality parameters.
•
Witness the Welding for establishing PQR for welding processes GTAW, SMAW.
•
Witness the stage wise inspection like Raw material identification, marking & cutting, fit-up, final
•
weld visual, dimension check up, blasting, painting, etc.
Accountable for preparing NDT plan, seam-wise check list.
•
Review subcontractors welding procedures and ensure compliance to the Client specification
•
Coordinating for the preparation of project specific Procedures, Work Instructions and Quality
•
Plans as required and issue as per the Subcontractor Quality System Procedures
Coordinating with Management representative for Internal Quality Audits, Quality System and
•
follow-up audits
COMPANY NAME: ONSHORE CONSTRUCTION PVT LIMITED
Period : 10-07-2008 to 18-09-2010.
Position : Quality Control Inspector.
Project :‘I.P.C.L’NAGOTHANE,TAL.DIST.RAIGAD .
Job Profile :
Fit-up inspection of weld joints.
•
Preparation of daily welding reports.
•
Interpretation of radiography films as per applicable code.
•
Preparation QA/QC dossier as per client requirement.
•
Coordination with NDT team at site.
•
Monitoring of Preheating/ Post heating / post weld heat treatment and electrode backing activities.
•
Inspection and testing of safety relief devices. Preparation of test pack and witnessing of hydro
•
test.
Interacting & coordinating with Clients for Quality parameters.
•
Witness the Welding for establishing PQR for welding processes GTAW, SMAW, SAW.
•
Witness the stage wise inspection like Raw material identification, marking & cutting, fit-up, final
•
weld visual, dimension check up, blasting, painting, etc
Accountable for preparing NDT plan, seam-wise check list.
•
Review subcontractors welding procedures and ensure compliance to the Client specification
•
Liaise with Customer Representative for the conduct of day to day quality related activities of the
•
project
Coordinating for the preparation of project specific Procedures, Work Instructions and Quality
•
Plans as required and issue as per the Subcontractor Quality System Procedures
Coordinating with Management representative for Internal Quality Audits, Quality System and
•
follow-up audit
KIRAN ENGINEERING CONSTRUCTIONS
COMPANY NAME :
Period : 25-05-2007 to 15-06-2008
Position : Assistant Quality Control Inspector.
Project : ‘LUBRIZOL INDIA LTD’Turbhe,NaviMumbai..
Job Profile :
• Coordination with NDT team at site.
• Monitoring of Preheating/ Post heating / post weld heat treatment and electrode backing activities.
• Inspection and testing of safety relief devices. Preparation of test pack and witnessing of hydro test.
• Interacting & coordinating with Clients for Quality parameters.
• Witness the Welding for establishing PQR for welding processes GTAW, SMAW.
• Witness the stage wise inspection like Raw material identification, marking & cutting, fit-up, final
weld visual, dimension check up,blasting, painting etc.
COMPUTER SKILLS;
Operating System : MS-OFFICE (word, excel measure roll).
•
: Well Mail Communication
Personal Details:
Name : Mr. SANTOSHKUMAR DOKKADA
•
Date of Birth : 15/03/1990.
•
Religion : HINDU
•
Nationality : Indian
•
Gender : Male
•
Marital Status : Unmarried
•
Spoken Languages : English, Hindi, &English.
•
Hobbies : watching cricket, .
•
Passport Details
Passport No. Place of Issue Date of Issue Date of Expiry
G2612037 VISAKHAPATNAM 25.06.2007 24/06/2017
DECLARATION:
I hereby declare that all the information furnished above is true to the best of my knowledge.
Place: VISAKHAPATNAM
Date:
SANTOSH KUMAR DOKKADA
Contact this candidate