Tayari (Sean) Philpott

**** ***** **. ** **********, Al. 35810 251-***-**** (cell), 256-***-****

(home),256-***-**** (fax), ab35bv@r.postjobfree.com

Objective Find employment with a company where my skills and experience

will

be an asset to the business utilizing my Heavy Equipment operating skills

and experience

while furthering my knowledge and abilities in the process.

Experience Crane Operator

06/11/2012 to 01/18/2013; Performance Contractors; De Kalb,

MS. Loading and Unloading trucks,

hanging iron and installing pipe and other material in and

around unit to be installed.

Crane Operator

01/03/2012 to 06/10/2012; Kellogg

Brown and Root; De Kalb, MS.

Operate a Crane to lift and move

materials and other objects, plan all lifts, use capacity charts, perform

rigging

inspection and daily crane inspection, respond according to hand and/ or

verbal

instruction, observe the travel of all loads and take appropriate action to

avoid

injury to personnel or damage to property, listen to warning alarms and

respond

accordingly, and read boom angle and drum rotation indicators.

Crane Operator

06/13/2011 to 12/31/2011; Rock and Coal Construction; Birmingham,

AL.

While working outside with limited supervision, I was the day time operator

for a

rebuild. Running of the 14000 Manitowoc, 70 and a 55ton Terex crane. Loaded

and unload equipment at the work site. Used a 10,000+ forklift to bring in

material to be installed as well as moving out material that has been demo.

Installing new equipment and steel in building. Carefully planned the

movements

of the crane to prevent damage to the load, machinery, or injury to

personnel.

Crane Operator

10/25/2010 to 06/10/2011; Teton/PCL; Port Arthur, TX..

I was responsible for operation of a 100 ton RT Crane (Link belt) often

times near lifting

limits while moving materials from one point to another. Erected structural

and pipe in

buildings. Loaded and unloaded equipment at the work site. Carefully

planned the movements of the crane to prevent damage to the load,

machinery, or injury to personnel.

Crane Operator

09/23/2010 to 10/22/2010 (PMSI)

Power plant Maintenance Specialist, Inc., Huntington, UT.

Boom Crane Operator/Forklift Operator

While working outside with no supervision, was the night time operator for

shutdown. Running of the 90ton crane. Loaded and unload equipment at the

work

site. Used a 10,000+ forklift to bring in material to be installed as well

as moving

out material that has been demo. Also used the forklift to move equipment

between different sites outside. Carefully planned the movements of the

crane to

prevent damage to the load, machinery, or injury to personnel.

Crane Operator

08/27/2010 to 09/21/2010; Tradesman International; Beatrice, NE.

While working outside with no supervision, I was responsible for operation

of a 75 ton

RT Crane (Terex) often times near lifting limits while moving materials

from one point to

another. Erected structural and pipe in buildings. Loaded and unloaded

equipment at the

work site. Confirmed reports of inventory. Carefully planned the movements

of the crane to

prevent damage to the load, machinery, or injury to personnel.

Crane Operator

06/14/2010 to 08/12/2010; Quinlan Enterprises; Birmingham, Al.

I was responsible for operation of a 138 Link belt Conventional Crane.

Often times near

lifting limits while moving materials from one point to another. Erected

structural and

pipe in buildings. Loaded and unloaded equipment at the work site.

Confirmed reports of

inventory. Carefully planned the movements of the crane to prevent damage

to the load,

machinery, or injury to personnel.

Crane Operator

3/15/10 to 4/30/2010; Welder International Co., Donaldsonville, LA

Boom Crane Operator

While working outside with no supervision, I was responsible for operation

of a 100 ton

and smaller RT Crane often times near lifting limits while moving materials

from one

point to another. Erected structural and pipe in buildings. Loaded and

unloaded

equipment at the work site. Used a crane with many different attachments.

Confirmed

reports of inventory. Carefully planned the movements of the crane to

prevent damage to the

load, machinery, or injury to personnel

Crane Operator

10/09 to 02/10; G.A.West; Calvert, AL

Boom Crane Operator/ Forklift Operator

While working outside with no supervision, operated cranes at all boom

lengths, angles,

and positions to build a steel mill plant located in Calvert, AL. This

required me to be skilled

in making rapid lifting capacity judgments since I routinely lifted at or

near capacity and

moved loads to different locations on site. Also, positioned "I" beams for

wielding and

used a crane with many different attachments. Loaded and unloaded equipment

at the

worksite. Operated 15,000lbs+ forklifts outside while moving various

materials to different

locations on site. Carefully planned the movements of the crane to prevent

damage to the

load, machinery, or injury to personnel.

Crane

Operator

10/27/08 to 09/24/09; Turner Industries Inc.; Gonzales,

LA.

While working outside with no supervision, I was responsible for operation

of a 100 ton

and smaller RT Crane often times near lifting limits while moving materials

from one

point to another. Trained new Employees on all the available cranes at the

work site.

Erected structural and pipe in buildings. Loaded and unloaded equipment at

the work

site. Used a crane with many different attachments. Confirmed reports of

inventory.

Carefully planned the movements of the crane to prevent damage to the load,

machinery, or

injury to personnel.

Forklift Operator/Crane Operator

08/08 to 10/08; Lauren Construction Co; Waco, TX.

While working outside with no supervision, was responsible for loading and

unloading

trucks as they arrived using 10,000lbs+ forklifts. Delivered materials to

different

locations on the job site. Responsible for reconfiguring numerous

individual working

sites to fit the needs of the employees. Carefully planned the movements of

the forklift to

prevent damage to the load, machinery, or injury to personnel. Also operate

Crane when

needed.

Crane Operator

10/06 to 06/08; Teaford Construction LLC,; (various)

Thomasville, AL. & Cottondale, FL

While working outside with no supervision, was responsible for loading and

unloading

trucks mainly carrying loose materials as they arrived after they were

inventoried.

Familiar with the use of many different attachments to the crane.

Frequently worked near

or at the crane's lifting capacity while moving equipment to different

locations on site.

Loaded and unloaded trucks using 10,000+ forklifts. Delivered materials to

different

locations on the job site. Carefully planned the movements of the crane to

prevent damage to

the load, machinery, or injury to personnel.

Crane Operator

08/05 to 09/06; (PMSI) Power plant Maintenance Specialist, Inc.; Aberdeen,

OH.

While working outside with no supervision, was the night time operator for

shutdown in a 3&4 phase outages running of the 85ton crane. Loaded and

unload

equipment at the work site. Used a 12000+ forklift to bring in material to

be

installed as well as moving out material that has been demo for the public.

Also

used the forklift to move equipment between different sites outside.

Carefully

planned the movements of the crane to prevent damage to the load,

machinery, or

injury to personnel.

Crane Operator/Track hoe (Excavator)

Operator 05/05 to 08/05;

Recmediation, Inc.; Freeport, TX.

While working outside with no supervision, used the track hoe for Demo

purpose Used

with different attachments that included; shears, grappler. Also run a boom

truck to take

down demoed pipe out of a live unit.

Crane Operator

03/05 to 05/05; (PMSI) Power plant Maintenance Specialist,

Inc.; Aberdeen, OH.

While working outside under limited supervision, was the day time operator

for

shutdown in phase 2 outages running of the Forklift/Crane. Loaded and

unload

equipment at the work site. Used a 12000+ forklift to bring in material to

be

installed as well as moving out material that has been demo for the public.

Also

used the forklift to move equipment between different sites outside.

Carefully

planned the movements of the crane to prevent damage to the load,

machinery, or

injury to personnel.

Track hoe (Excavator) Operator

11/04 to 03/05; Recmediation, Inc.; Decatur, AL

While working outside with no supervision, used the track hoe for Demo

purpose Used

with different attachments that included; shears, grappler. Also run a boom

truck to take

down demoed pipe out of a live unit.

Track hoe (Excavator) Operator

06/04 to 11/04; Stanly Construction; Huntsville,

AL. While working outside with no supervision, used the

excavator to break new ground for pipelines to drain systems. Was tasked to

use the

excavator to load dump trucks with dirt as well.

Crane Operator/Forklift Operator

11/98 to 06/04; Gilbert Industrial Corporation; [Various] Mobile, AL.; Pace

FL.;

Charlottesville, VA. Safely operating a variety of cranes, such as but not

limited to, 10t,

18-100 ton rough terrain; other heavy equipment including boom forklift up

to 15 ton,

front-end loader model number 966, excavator, and bulldozer. Able to handle

equipment

safely with no lost time or injuries, following operation rules and

procedures; company

certified Journeyman Operator; able to operate various hand, power and

pneumatic tools.

. Also used the forklift to move equipment between different sites outside.

Loaded and

unload equipment at the work site. Carefully planned the movements of the

crane to

prevent damage to the load, machinery, or injury to personnel.

Forklift Operator

10/97 to 11/98; Halliburton/ Brown and Root; Mobile, AL

Operated a forklift in a warehouse and tool room in a fast-paced

environment to transport

parts and supplies. Responsible for loading and unloading trucks. Worked

independently

in a wide range of warehousing activities, including receiving, storing,

selecting, and

shipping general or specialized bulk and bin materials and equipment.

Prepared shipping

and inventory documents with required data for inventory systems. Skilled

in the use of

manual dollies, electric jacks, and hand tools used in warehouse tasks such

as hammers,

pliers, strapping and stretch wrapping tools and equipment, tape fasteners,

metal band

sheers and related equipment. Carefully planned the movements of the

forklift to prevent

damage to the load, machinery, or injury to personnel.

Assistant/General Manager

05/1994 to

09/1998, Papa Johns Pizza, Mobile AL.

. Assistant manager for three years helping build sells and

run night shifts and days opening store and closing.

Designating responsibility to others making sure store ran

smooth on my shift.

. After Graduating became GM of my own store raising sells of

over 2500 weekly improving health score in store within a

6 month period.

Education John L. Leflore High School; Mobile, Al.

. Graduated 1996

Certifications: Transportation Worker Identification

Credential (TWIC)

Expires 30 April 2014

National Commission for the Certification of Crane Operators (NCCCO)

Expires 31 August 2014

References Other References are available on request.

Teaford Co. 770-***-****

Kiewit Corporation (Gilbert)

404-***-****; Recmediation,

Inc. 908-***-****;

Power plant

Maintenance Specialist, Inc. (PMSI) 714-***-****.

Turner Industrial Co. 225-***-****

Contact this candidate