Mechanical Engineer

Behrad Kiani

#****-**** ********* ******- **** Vancouver, BC V7V1R3

Tel: 604-***-****

E-mail: ab2z8o@r.postjobfree.com

JOB OBJECTIVE

Mechanical Engineer/Designer

SUMMARY

• +10 Years Work Experience as a Part of Multidisciplinary Technical Team.

• 7 Years Experience in Solid Works Software.

• Proficient in AutoCAD (2D&3D ) Software.

• Designing and 3D Modeling of Road Machines and Mechanical Equipments.

• Designing and 3D Modeling of Industrial Projects.

• Designing and 3D Modeling of High Tech. Electro-Mechanical Systems.

• Handle Projects From Zero Point to End Point and Delivery to the Customer.

• Proficient in Stress Analysis By Finite Element Software NISAII.

• Engaged in Hydraulic Design and Hydraulic Component Selection.

• Experienced in Research, Component Selection, Collecting Required Information

for Conceptual Design of New Projects.

• Expert in Modeling of Industrial Structure, Gusset, Weldment, Connections.

• Expert in Preparation of Layouts, Production Drawings, Assembly Drawings,

Exploded Drawings, Part List and Bill of Material for Mechanical Projects.

• Expert in Geometric Dimensioning and Tolerancing.

• Expert in Assembly of Mechanical Systems.

• Experienced in Operational and Field Testing of Mechanical Systems.

• Engaged in Environmental Test Such as IP, Vibration and Temperature Test.

• Experienced in Cost Estimate and Manufacture Scheduling.

• Expert in Production Procedures and Fabrication.

• Expert in Designing and Modeling Sheet Metal Parts.

• Experienced in Heat Treatment, Hardening, Tempering, Annealing.

• Experienced in Service Department and Communicating with Client as Technical

Supervisor and Use Customer Feedback to Improve Quality of Systems.

• Data Visualization.

• Member of Foundation of Iranian Elites.

RELATED WORK EXPERIENCES

Data Visualization Vancouver-Canad ( 2012-2013) & Present

AquaCoustic Company (Inspections of Under Water Structures )

• Analyzing Sonar or Laser Data and Preparation Data for Mashlab Software.

• Compare Data That Collected from Two Lasers for Correction any Rotation

Around XYZ- Axis and any Displacement.

• Data Visualization with AutoCAD to Determine, Erosion, Restriction, Profile,

Connections.

R&D LabTechnician Canada-Richmon (January-April) 2013

Mechanical Assembler

Canon Group, Oce-Canada Inc. (Display Graphic Systems-Printers, Plotters, Copiers)

Lab Technician : Angular Alignment of Carriage, Performing Linearization, Operational

Test and Preparing Report of Industrial Printer Performance.

Assembler : Assembly of Vacuum Pump Package and Hipot Test, Assembly of

Podium Table, Assembly of Flat Bed Table.

Senior Mechanical Designer Esfahan-Iran 2009-2012

Tabesh Gostar Company (Design and Manufacture of Electro-Mechanical Systems)

Long Range Surveillance System ( Precise, 2 Degree of Freedom and Motorized)

• Conceptual Design.

• Research on the Motors, Encoders, and Power Transmission System According to

the Precision.

• Design and 3D Modeling of Framework, Body and Mounting Tripod.

• Design and 3D Modeling of Power Transmission System.

• Technical Supervision of Manufacturing and Assembly.

• Engaged in Operational and Environmental Tests According to the Standards and

Technical Appendix.

Monitor Box of Speedometer, Atlanta Was Equipped for Documentation.

• This System Includes: LCD, GPS, PC104, Camera, SSD Hard Disk, Electronic

Board, Wireless Link, DC-DC Convertor.

• Research on the Various Models and Required Components.

• Designing and 3D Modeling of Main Body, Alignment Mechanism, Mechanical

Mounts, Case, Cover and Sealing Parts.

• Preparation of Layout and Drawings.

• Assembly of First Sample.

• Operational and Environmental Test and Field Testing.

Tester of Generator (Generator Testing in Various Rev. Up to 8000Rev/Min.)

• Designing and 3D Modeling of Framework, Body, Main Shaft, Housing,

Structure, Box and Mechanical Parts.

• Preparation of Drawings, Dimensioning and Tolerancing.

• Selection of Motor, Ball Bearing, Coupling and Rubber Mount.

• Engaged in Assembly of the System.

Senior Mechanical Designer Esfahan-Iran 2005-2009

Machine Abzar Shems Company (Design and manufacture of Mechanical Equipments)

Double Drum Vibratory Roller Compactor (Road Roller)

• Designing and 3D Modeling of Eccentric Shaft, Power Transmission System for

Vibrator, Bearing of Vibrator, Bearing of Drum, Power Transmission System for

Drum, Main Body, Base Plate and Rubber Shock Absorber for Installation of the

Engine, Control Lever and Mechanism for Movement, Control Lever for Engine.

• Selection of Ball Bearing, O-Ring, Ring Seal, V Belt, Pulley, Chain and Sprocket.

• Designing Cover and Sheet Metal Part.

• Engaged in Preparing of Fabrication Drawings, Assembly Drawings and Part List.

• Put Tolerances and Required Symbols for Manufacturing.

• Close Communication with Manufacture and Assembly Departments.

• Engaged in Operational Test and Performing Some Revision on the Initial

Drawings.

Compactor Machine

• Designing and 3D Modeling of Cylinder, Eccentric Shaft, Eccentric Clutch, Base

Plate for Vibration Insulation of Engine, Main Body and Mechanical Parts.

• Selecting O-ring, Ring Seal, Rubber Shock Absorber and Ball Bearings.

• Preparing Drawings, Dimensioning and Tolerancing.

• Supervision of Production.

• Operational Test.

Reverse Engineering of Worm GearBox

• Disassemble of Gearbox and Measure Size of the Mechanical Parts.

• 3D Modeling all Parts and Preparation of Drawings and GD&T .

• Designing and 3D Modeling of Body Model for Casting.

Reverse Engineering of Asphalt Cutter Machine.

Experienced in Service Department, as a Technical Person and Collecting Customer’s

Feedback to Make Some Change and Revision to Improve Quality of the Systems

Mechanical Engineer Shiraz-Iran (1999-2000) & ( 2003-2005)

Fars Engineering Research Center (Design and Manufacture of Industrial Projects)

Powder Milk Plant

• 3D Modeling of Evaporators, Cyclones, Drier, Atomizer, Industrial Structures,

Connections, Piping, Wiring, Control Panels.

• Preparing of Plant Layout, Bill of Material, Part List.

• Stress Analysis of Industrial Structure By Finite Element Software (NisaII)

• Thermal Stress Analysis of Evaporators and Designing an Expansion Joint to

Reduce Thermal Stresses.

• Technical Supervision of Production and Implementation.

• Engaged in Installation of Equipments and Set up the Plant

Production Engineer Esfahan-Iran 2001-2003

Foulad Kooban Company (Manufacture of Mechanical Parts-Forging)

• Designing Preform, Forging, Trimming, Bending and Calibration Mould

• Preparing Technical Procedure for Heat Treatment, Hardening and Tempering, of

Moulds and Mechanical Parts.

• Designing Fixture for Machining and Quality Control of Mechanical Parts.

• Supervisor of Production in Machining Workshop.

• Communicating With Car maker Companies and Railway Company to Improve of

Parts Quality.

Junior Engineer (Trainee) Esfahan-Iran 1996-1997

Foulad Saban Company (Design and manufacture of Hydraulic System)

Hydraulic Press (600Ton-Iran khodro Car Maker)

• Engaged in Designing and 3D Modeling of Mechanical Part, Upper Body, Lower

body and Main Column and moving Jaw.

• Stress Analysis of Main Columns by Finite Element Software (NisaII)

• Engaged in Designing of Hydraulic System, Manifold, Layout and Locating.

• Calculating for Selection of Hydraulic Components, Size of the Cylinder and Rod

and Rod Buckling, Pump Delivery and Pressure and Speed of Actuator.

• Selection of O-ring, Seal Ring, Rod Wiper.

• Supervision of Manufacture and Assembly of the System and Operational Test.

EDUCATION

Master of Science : Mechanical Engineering, Shiraz University (Pahlavi)

Shiraz-Iran (1998-2000)

Bachelor of Science : Mechanical Engineering, Esfahan University of Technology

Esfahan-Iran (1994-1998)

Contact this candidate